2010 GMC Cardone Parts


Showing 1 - 10 of 57 products
Image
SKU
Product
Rating
Price
Additional Fitment Information:
Vehicle
2010 - GMC Acadia

Cardone
  • with Hydraulic Power Includes Inner Tie Rods For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
  • Remanufactured Rack and Pinion Assembly
  • Product Attributes:
    • FAQ_Q4: Are There Any Steps That Should Be Done Prior To Alignment?
    • FAQ_Q1: I Replaced The Rack And Now The Power Steering Pump Is Whining. It Never Did This Before! What Happened?
    • Grade Type: Regular
    • Mounting Hardware Included: No
    • FAQ_Q3: The Replacement Rack And Pinion Is Installed And The Steering Wheel Has Too Much Play. Should I Adjust The Rack?
    • FAQ_Q2: The Steering Wheel Is Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
    • Is Prop Sixty Five Affected: No
    • Outlet Line Fitting Gender: Male
    • End To End Length:
      • 1393.82
      • 54.875
    • Product Condition: Remanufactured
    • Is the item CARB affected: No
    • Contains Electronic Components: No
    • Steering Input Shaft Diameter:
      • 0.785
      • 19.93
    • Mounting Brackets Included: No
    • Is Item A Chemical: No
    • Total Turns Lock To Lock: 3
    • Input Shaft Type: Double Flat
    • Inlet Line Fitting Diameter:
      • 0.462
      • 11.73
    • Is Or Contains A Battery: No
    • Mounting Hole Quantity: 4
    • FAA_A1: The Most Likely Cause Of A Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled. This May Take A Few Attempts Depending On The Design Of The System.
    • Outer Tie Rods Included: No
    • Is Or Contains A Bulb: No
    • E-Waste: No
    • Gasket Or Seal Included: Yes
    • Inlet Line Fitting Gender: Male
    • Does it require SDS: No
    • Inner Tie Rods Included: Yes
    • Outlet Line Fitting Diameter:
      • 0.451
      • 11.46
    • Bellows Color: Black
  • Features:
    • Protective coating applied to each unit to extend the life of the unit (where applicable).
    • 100% performance testing to ensure perfect fit, function and reliable performance.
    • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
    • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
    • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
    • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
    • Valve housings have polished micro-finish sleeves for durability (where applicable).
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

This Part Fits the Following OEM/Substitute Numbers:
15254060, 15254062, 19133646 , 19133648, 19133648 , 19153072, 19153072 , 19153073, 19153074, 19153074 , 19153075, 19178559, 19178559 , 19178561, 19207489 , 19207490, 19207491, 19207491 ...VIEW MORE

Additional Fitment Information:
Vehicle Body
2010 - GMC Sierra 1500 Crew Cab Pickup

Cardone
Additional Fitment Information:
Vehicle
2010 - GMC Savana 3500

Cardone
  • Reservoir Not Included For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
  • Remanufactured Power Steering Pump
  • Product Attributes:
    • FAQ_Q5: Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
    • FAQ_Q4: I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
    • Reservoir Cap Included: No
    • FAQ_Q1: Why Is The Pump Making A Whining Noise All Of The Time?
    • Inlet Diameter:
      • 0.573
      • 14.5542
    • Mounting Hardware Included: No
    • FAQ_Q3: I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
    • FAQ_Q2: Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
    • Filter Included: No
    • Is Prop Sixty Five Affected: No
    • Outlet Attachment Type: Threaded
    • Reservoir Included: No
    • Product Condition: Remanufactured
    • Is the item CARB affected: No
    • Outlet Quantity: 1
    • Contains Electronic Components: No
    • Remote Reservoir Included: No
    • Outlet Thread Size: 16x1.5
    • Pulley Included: No
    • Is Item A Chemical: No
    • Pulley Attachment Type: Press-on
    • Is Or Contains A Battery: No
    • Hose Port Type: O-ring
    • FAA_A4: There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
    • FAA_A2: The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
    • FAA_A3: The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
    • Is Or Contains A Bulb: No
    • Shaft Type: Press-on
    • E-Waste: No
    • Inlet Quantity: 1
    • Does it require SDS: No
    • Pulley Belt Type: Serpentine
    • Inlet Attachment Type: Barb
    • Remote Reservoir: No
  • Features:
    • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
    • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
    • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
    • Units are supplied with 100% tested and calibrated pressure relief valves.
    • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

This Part Fits the Following OEM/Substitute Numbers:
13505835, 13576573 , 13577682, 13580490, 13580490 , 25950529

Additional Fitment Information:
Vehicle Block CC Engine CID
2010 - GMC Terrain V - 6 Cyl 3.0L 182

Cardone
  • Remanufactured
  • w/o Master Cylinder

Additional Fitment Information:
Vehicle
2010 - GMC Sierra 3500 HD

Cardone
Additional Fitment Information:
Vehicle Block CC Engine CID
2010 - GMC Sierra 3500 HD V 6599 8 Cyl 6.6L 403

Cardone
  • Remanufactured
  • w/o Reservoir
  • w/o Reservoir

Additional Fitment Information:
Vehicle Sub Model
2010 - GMC Sierra 1500 SLT

Cardone
  • Reman Complete Long Rack
  • w/o Outer Tie Rod Ends

Additional Fitment Information:
Vehicle Sub Model
2010 - GMC Sierra 1500 XFE

Cardone
Additional Fitment Information:
Vehicle Sub Model
2010 - GMC Savana 2500 LS

Cardone
Additional Fitment Information:
Vehicle
2010 - GMC Acadia
Showing 1 - 10 of 57 products

Loading...