1974 Centerforce Parts

Choose a Make for your 1974 vehicle


Showing 1 - 10 of 25 products
Image
SKU
Product
Rating
Price

Centerforce
  • Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
  • Flat Face; 0.665 in. Height; 2.740 in. Major Outside Diameter; 1.380 in. Inside Diameter; Groove Retension
  • Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
  • Throwout Bearing
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
  • Features:
    • Throwout Bearing
  • Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:
Vehicle Block CC Engine CID
1974 - GMC K25/K2500 Suburban V 7439 8 Cyl 7.4L 454

Centerforce
  • Centerforce(R) I; Clutch Pressure Plate
  • 11 in. Dia.; 3 Bolt Pattern; 522 ft/lbs Torque; Flat; Nodular Iron Pressure Plate
  • The Centerforce(R) I Clutch Pressure Plate has been designed as a high-quality entry-level performance pressure plate for those in need of a superior stock replacement (disc sold separately).
  • Centerforce I Clutch Pressure Plate
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Diameter (in.): 11.000 In.
  • Features:
    • Patented Centrifugal Weight Design [where Applicable]
    • High Quality Friction Material
    • Light Pedal Effort
    • Smooth Engagement
  • The Centerforce(R) I, Clutch Pressure Plate has been designed as a high-quality entry-level performance pressure plate for those in need of a superior stock replacement (disc sold separately). Using the Centerforce centrifugal weight system (where applicable). The Centerforce I clutch system is perfect for applications with stock engines or mild power increases from minor bolt-on modifications. The torque figures for Centerforce I Pressure Plates are based and calculated in conjunction with a Centerforce I & II clutch disc.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1974 - Chevrolet El Camino V 7439 8 Cyl 7.4L Base 454

Centerforce
  • Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
  • Flat Face; 1.625 in. Height; 2.740 in. Major Outside Diameter; 1.255 in. Inside Diameter; Clip Retension
  • Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
  • Throwout Bearing
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
  • Features:
    • Throwout Bearing
  • Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:
Vehicle Block CC Engine CID
1974 - Dodge D200 Pickup V 7211 8 Cyl 7.2L 440

Centerforce
  • Centerforce(R) Accessories; Clutch Pilot Bearing
  • 0.715 in. Height; 1.094 in. Major Outside Diameter; 0.615 in. Inside Diameter
  • Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
  • Pilot Bearing
  • Product Attributes:
    • Inside Diameter: 0.612 In.
    • WARNING CA Proposition 65: Yes
    • Outside Diameter: 1.094 In.
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Overall Length: 0.720 In.
  • Features:
    • Pilot Bearing
  • Pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:
Vehicle Block CC Engine CID
1974 - Chevrolet C20 Suburban L 4786 6 Cyl 4.8L 292

Centerforce
  • Centerforce(R) I and II; Clutch Friction Disc
  • 11 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; Organic Friction
  • The Centerforce I and II Discs are made from full high-quality friction full facings. These discs are made for Centerforce I and II pressure plates.
  • Clutch Disc
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Diameter (in.): 11.000 In.
    • Spline Size: 1.03125 In. - 10
  • Features:
    • High Quality Friction Material
    • Smooth Engagement
  • Centerforce brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate.

Additional Fitment Information:
Vehicle Block CC Engine CID
1974 - Chevrolet K20 Suburban L 4097 6 Cyl 4.1L 250

Centerforce
  • SST 10.4; Clutch and Flywheel Kit
  • 10.4 in. Dia.; 1 1/8 in.; 10 Spline; 925 ft/lbs Torque Cap.; Solid Full Face Organic Twin Disc/Floater/Pilot Brg./Bolts/Alignment Tool
  • The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
  • Centerforce I Clutch And Flywheel Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning - Includes Nickel - Cancer. Www.p65warnings.ca.gov.
  • Features:
    • 10.4 in. Diameter
  • Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine Engine VIN CID
1974 - Chevrolet C20 Suburban V - GAS 8 Cyl 5.7L Y 350

Centerforce
  • Centerforce(R) I and II; Clutch Friction Disc
  • 11 in. Dia.; 26 Spline; 1 1/8 in. Input Shaft; Organic Friction
  • The Centerforce I and II Discs are made from full high-quality friction full facings. These discs are made for Centerforce I and II pressure plates.
  • Clutch Disc
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Diameter (in.): 11.000 In.
    • Spline Size: 1.125 In. - 26
  • Features:
    • High Quality Friction Material
    • Smooth Engagement
  • Centerforce brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1974 - Chevrolet Monte Carlo V 7439 8 Cyl 7.4L Base 454

Centerforce
  • Centerforce(R) II; Clutch Kit
  • 11 in. Dia.; 3 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 572 ft/lbs Torque; Includes Pressure Plate/Clutch Disc/Throw Out Bearing/Alignment Tool
  • Centerforce(R) II Clutch Series utilizes our centrifugal weights and patented machining processes for superb holding power and maximum clutch life.
  • Centerforce® II Clutch Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
  • Features:
    • Patented Centrifugal Weight Design [where Applicable]
    • Patented Ball Bearing Pressure Plate [where Applicable]
    • Light Pedal Effort
    • High Quality Friction Material
    • Increased Holding Capacity
    • Smooth Engagement
  • The Centerforce(R) II Clutch Series utilizes a full facing disc with premium friction material and a pressure plate with centrifugal weights (where applicable). Furthermore, static clamp load is increased via our patented machining processes; this combination allows superb holding power and maximum clutch life, making this clutch ideal for selected street/strip, off-road and towing applications. Pressure plate and disc sold separately on some applications. The Torque Figures for Centerforce II Pressure Plates are based and calculated in conjunction with a Centerforce I & II Clutch Disc.

Additional Fitment Information:
Vehicle Block CC Engine CID
1974 - GMC C15/C1500 Suburban L 4801 6 Cyl 4.8L 292

Centerforce
  • SST 10.4; Clutch and Flywheel Kit
  • 10.4 in. Dia.; 1 1/8 in.; 10 Spline; 925 ft/lbs Torque Cap.; Solid Full Face Organic Twin Disc/Floater/Pilot Bearing/Bolts/Alignment Tool
  • The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
  • Centerforce I Clutch And Flywheel Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning - Includes Nickel - Cancer. Www.p65warnings.ca.gov.
  • Features:
    • 10.4 in. Diameter
  • Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.

Additional Fitment Information:
Vehicle Block CC Engine CID
1974 - GMC Sprint V - 8 Cyl 5.7L 350

Centerforce
  • Centerforce(R) Flywheels; Steel
  • 166 Teeth; Weight 30.6 lbs.; 2/3 Bolt Pattern; 4.22 in./oz Counter Balance; 2.750 in. Diameter Crank Flange
  • Centerforce(R) SFI-certified steel flywheels are CNC-machined from billet steel for precise; no-hassle; bolt-in installation.
  • Billet Steel Flywheel
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
  • Features:
    • High Quality Billet Steel
    • Cad/cam Designed And Cnc Machined
    • Precision Balanced
    • No-hassle Bolt-in
    • Domestic And Import Applications
  • Centerforce(R) steel flywheels are manufactured from high quality billet steel and match closely to the original equipment flywheel weight. Billet steel flywheels are available for popular import and domestic vehicles, including trucks. Centerforce steel flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation. Centerforce billet steel flywheels are SFI-certified, so you know that you can count on them, on the street and on the track.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1974 - Pontiac Ventura V 5733 8 Cyl 5.7L Base 350
Showing 1 - 10 of 25 products

Loading...