Image
Product
Price
- Centerforce(R) Accessories; Clutch Pilot Bearing
- 0.715 in. Height; 1.094 in. Major Outside Diameter; 0.615 in. Inside Diameter
- Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Pilot Bearing
- Product Attributes:
- Inside Diameter: 0.612 In.
- WARNING CA Proposition 65: Yes
- Outside Diameter: 1.094 In.
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Overall Length: 0.720 In.
-
Features:
- Pilot Bearing
- Pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1990 - Chevrolet C1500 | V | - | 8 Cyl 5.7L | Silverado | 350 |
- Centerforce(R) I and II; Clutch Friction Disc
- 11 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; Organic Friction
- The Centerforce I and II Discs are made from full high-quality friction full facings. These discs are made for Centerforce I and II pressure plates.
- Clutch Disc
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Diameter (in.): 11.000 In.
- Spline Size: 1.03125 In. - 10
-
Features:
- High Quality Friction Material
- Smooth Engagement
- Centerforce brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - GMC S15 | V | - | 6 Cyl 4.3L | 262 |
- Centerforce(R) I and II; Clutch Friction Disc
- 8 7/8 in. Dia.; 23M Spline; 1 in. Input Shaft; Organic Friction
- The Centerforce I and II Discs are made from full high-quality friction full facings. These discs are made for Centerforce I and II pressure plates.
- Clutch Disc
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Diameter (in.): 8.875 In.
- Spline Size: 1.000 In. - 23
-
Features:
- High Quality Friction Material
- Smooth Engagement
- Centerforce brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate.
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - Ford Bronco II |
- Dual Friction(R); Clutch Pressure Plate and Disc Set
- 10.4 in. Dia.; 2 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 521 ft/lbs Torque; Includes Pressure Plate/Disc/Alignment Tool
- The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
- Dual Friction® Clutch Pressure Plate And Disc Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - Jeep Wagoneer |
- Centerforce(R) II; Clutch Kit
- 12 in. Dia.; 3 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 608 ft/lbs Torque; Includes Pressure Plate/Clutch Disc/Throw Out Bearing/Alignment Tool
- Centerforce(R) II Clutch Series utilizes our centrifugal weights and patented machining processes for superb holding power and maximum clutch life.
- Centerforce® II Clutch Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- The Centerforce(R) II Clutch Series utilizes a full facing disc with premium friction material and a pressure plate with centrifugal weights (where applicable). Furthermore, static clamp load is increased via our patented machining processes; this combination allows superb holding power and maximum clutch life, making this clutch ideal for selected street/strip, off-road and towing applications. Pressure plate and disc sold separately on some applications. The Torque Figures for Centerforce II Pressure Plates are based and calculated in conjunction with a Centerforce I & II Clutch Disc.
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - Chevrolet Blazer |
- SST 10.4; Clutch and Flywheel Kit
- 10.4 in. Dia.; 1 1/8 in.; 10 Spline; 925 ft/lbs Torque Cap.; Solid Full Face Organic Twin Disc/Floater/Pilot Brg./Bolts/Alignment Tool
- The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
- Centerforce I Clutch And Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning - Includes Nickel - Cancer. Www.p65warnings.ca.gov.
-
Features:
- 10.4 in. Diameter
- Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - GMC C1500 | V | - | 8 Cyl 5.7L | 350 |
- Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
- Flat Face; 0.665 in. Height; 2.740 in. Major Outside Diameter; 1.380 in. Inside Diameter; Groove Retension
- Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Throwout Bearing
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Throwout Bearing
- Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1990 - Chevrolet C1500 | V | - | 8 Cyl 5.7L | Silverado | 350 |
- Dual Friction(R); Clutch Kit
- 12 in. Dia.; 3 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 694 ft/lbs Torque; Includes Pressure Plate/Clutch Disc/Align Tool
- The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
- Dual Friction® Clutch Pressure Plate And Disc Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1990 - Chevrolet C1500 | V | - | 8 Cyl 7.4L | Silverado | 454 |
- Dual Friction(R); Clutch Pressure Plate and Disc Set
- 8 3/8 in. Dia.; 15 Bolt Pattern; 20 Spline; 7/8 in. Input Shaft; 237 ft/lbs Torque; Includes Pressure Plate/Disc/Alignment Tool
- The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
- Dual Friction® Clutch Pressure Plate And Disc Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1990 - Honda Civic | L | 1493 | 4 Cyl 1.5L | DX | - |
- Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
- Flat Face; 0.982 in. Height; 2.740 in. Major Outside Diameter; 1.442 in. Inside Diameter; Clip Retension
- Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Throwout Bearing
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Throwout Bearing
- Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - Ford F-250 | L | 4917 | 6 Cyl 4.9L | 300 |
Showing 1 - 10 of 13 products
Loading...