Image
Product
Price
- Fuel Pump Strainer
- Product Attributes:
- Attachment Type: Push On
- Length:
- 3.8
- 96.5
- Width:
- 2
- 50.8
- Fitting Inside Diameter:
- 0.8661
- 22.0
- Micron Rating: 31
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
12-111-5, 125-135, 125135, 25163648, 5111006, 68012, 952-0044, 952-0052, A0006S, BFS0120, E99Z 9A011-A, EP274, FS111, FS205, FS207, FS260340, S13004, S13026...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Jeep Comanche | L | - | 6 Cyl 4.0L | 242 |
- Electric Fuel Pump
- with 15 Gallon Tank
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Length: 113.0
- Connector Shape: Rectangle
- Minimum Pressure: 44
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Inlet Type: Strainer
- Maximum Amperage Draw: 5.0
- Average Flow Rating: 29.0
- Inlet Outside Diameter: 11.0
- Wire Quantity: 0
- Average Current Draw: 5.0
- Maximum Pressure: 85.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Mounting Bracket Included: No
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Outlet Type: Hose Bead
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
152-0886, 152-0925, 152-0961, 152-0964, 152-0965, 152-0970, 152-0972, 152-0998, 17040-S0X-A00, 17040-S0X-A01, 17040-S10-A10, 17040-S10-C20, 17040-S2A-930, 17040-S30-A31, 17040-S30-A50, 17040-S30-L01, 17040-SR2-A31, 17040-SR3-A31...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1991 - Jeep Wrangler | L | - | In-Tank | 4 Cyl 2.5L | 150 |
- Electric Fuel Pump
- with 15 Gallon Tank
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Length: 113.0
- Connector Shape: Rectangle
- Minimum Pressure: 44
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Inlet Type: Strainer
- Maximum Amperage Draw: 5.0
- Average Flow Rating: 29.0
- Inlet Outside Diameter: 11.0
- Wire Quantity: 0
- Average Current Draw: 5.0
- Maximum Pressure: 85.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Mounting Bracket Included: No
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Outlet Type: Hose Bead
-
Features:
- Always be sure to check and clean fuel tank to avoid returns
- Each part undergoes testing to ensure the same fit, form, and function as the OE
- Instructional installation sheets included in every box
- Sparta, distributed by the only OE full-line fuel supplier Delphi, is specifically designed for higher mileage and earlier model vehicles. Turn to the brand backed by the OE experts, who know fit and performance better than anyone.
This Part Fits the Following OEM/Substitute Numbers:
152-0886, 152-0925, 152-0961, 152-0964, 152-0965, 152-0970, 152-0972, 152-0998, 17040-S0X-A00, 17040-S0X-A01, 17040-S10-A10, 17040-S10-C20, 17040-S2A-930, 17040-S30-A31, 17040-S30-A50, 17040-S30-L01, 17040-SR2-A31, 17040-SR3-A31...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1991 - Jeep Wrangler | L | - | In-Tank | 4 Cyl 2.5L | 150 |
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Jeep Comanche |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Jeep Cherokee | Front Upper |
- Ball Joint
- Knurled Type Non-Adjustable Type OE Design Greasable
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov.
- Tapered Stud: Yes
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Steering Type: Power
- Maximum Outside Diameter:
- 2.126
- 54.00
- Greaseable: Yes
- Ball Joint Assembly: Yes
- Cotter Pin Hole: Yes
- Stud Threads Per Inch: 18
- Dust Boot Material: Rubber
- Stud Type: Threaded
- Adjustable: No
- Mount Plate Included: No
- Suspension Grade Type: Standard
- Wear Indicator Included: No
- Cotter Pin Included: Yes
- Retaining Ring Included: No
- Stud Thread Length:
- 0.906
- 23.00
- Mounting Bolts Included: No
- Stud Tapered End 2 Diameter:
- 0.752
- 19.10
- Thread Direction: Counterclockwise (left)
- Washers Included: No
- Castle Nut Included: Yes
- Grease Fitting Included: Yes
- Attachments Included: No
- Position(s): Front Upper
- Reinforced: No
- Dust Boot Included: Yes
- Stud Tapered End 1 Diameter:
- 0.624
- 15.85
- Bearing Type: Plastic
- Mounting Type: Press-in
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
68004085AA, 83500202, 8983500202, K3134T, K68004085AA, MK3134T
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Jeep Comanche | Front Upper |
Showing 1 - 6 of 6 products
Loading...