Image
Product
Price
- Electric Fuel Pump
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Length: 113.0
- Connector Shape: Rectangle
- Minimum Pressure: 44
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Inlet Type: Strainer
- Maximum Amperage Draw: 6.0
- Average Flow Rating: 26.0
- Inlet Outside Diameter: 11.0
- Wire Quantity: 0
- Average Current Draw: 6.0
- Maximum Pressure: 80.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Mounting Bracket Included: No
- Gasket Or Seal Included: Yes
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Outlet Type: Hose Bead
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
152-0894, 152-0895, 152-0910, 152-0914, 195130-6970, 1951306970, 1AMFP00149, 23220-03020, 23220-03030, 23220-03040, 23220-0C010, 23220-20020, 23220-74020, 23220-74021, 2322003020, 2322003030, 2322003040, 232200C010...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Toyota Tacoma | L | 2694 | In-Tank | 4 Cyl 2.7L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- OE Replacement
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Toyota MR2 Spyder |
- Fuel Pump Strainer
- Product Attributes:
- Attachment Type: Push On
- Length:
- 3.5
- 88.9
- Width:
- 2
- 50.8
- Fitting Inside Diameter:
- 0.4331
- 11.0
- Micron Rating: 31
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
12-160-5, 23217-03030, 23217-0F010, 23217-11020, 23217-20060, 23217-23010, 23217-46090, 23217-74021, 23217-76040, 2321711020, 2321746090, 68000, 68020, 68021, 68031, 68040, 68043, 88972522...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Toyota Celica | L | 1794 | 4 Cyl 1.8L | - |
- ABS Wheel Speed Sensor
- Includes ABS Wheel Speed Sensor Wire Harness
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Position(s): Front Left
- Delphi's ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
This Part Fits the Following OEM/Substitute Numbers:
531303, 5S6826, 89543-08030, ABS752, ALS642
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2004 - Toyota Sienna | V | 3300 | Front Left | 6 Cyl 3.3L | CE | 202 |
- ABS Wheel Speed Sensor
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Mounting Hardware Included: Yes
- Wiring Harness Length: 1260
- Connector Quantity: 1
- Connector Shape: Square
- Terminal Quantity: 2
- Wiring Harness Included: Yes
- Connector Color: White
- Position(s): Front Right
- Terminal Type: Blade
- Terminal Gender: Female
- Delphi's ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
This Part Fits the Following OEM/Substitute Numbers:
531304, 5S6772, 89542-08030, ABS753, ALS643
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2004 - Toyota Sienna | V | 3300 | Front Right | 6 Cyl 3.3L | LE | 202 |
- Ignition Knock (Detonation) Sensor
- Product Attributes:
- Connector Gender: Male
- Mounting Hardware Included: No
- Connector Quantity: 1
- Terminal Type: Pin
- Connector Shape: Round
- Terminal Gender: Male
- Terminal Quantity: 1
- Delphi's ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5S2256, 89615-52010, DKS636, KS186, S8786
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2004 - Toyota Sequoia | V | 4663 | 8 Cyl 4.7L | Limited | 285 |
- Ball Joint
- Knurled Type
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov.
- Tapered Stud: Yes
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Steering Type: Power
- Maximum Outside Diameter:
- 1.693
- 43.00
- Greaseable: No
- Ball Joint Assembly: Yes
- Cotter Pin Hole: No
- Dust Boot Material: Rubber
- Stud Type: Threaded
- Adjustable: No
- Mount Plate Included: No
- Suspension Grade Type: Standard
- Stud Thread Pitch: 1.25
- Wear Indicator Included: No
- Cotter Pin Included: No
- Retaining Ring Included: Yes
- Stud Thread Length:
- 0.843
- 21.40
- Mounting Bolts Included: No
- Stud Tapered End 2 Diameter:
- 0.650
- 16.50
- Thread Direction: Counterclockwise (left)
- Washers Included: No
- Castle Nut Included: No
- Grease Fitting Included: No
- Attachments Included: No
- Stud Thread Diameter:
- 0.472
- 12.00
- Position(s): Front Lower
- Reinforced: No
- Dust Boot Included: Yes
- Stud Tapered End 1 Diameter:
- 0.531
- 13.50
- Bearing Type: Plastic
- Mounting Type: Press-in
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-7695, 48068-59055, 48069-59055, K500118, MK90310
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota Echo | Front Lower |
- Ball Joint
- Knurled Type
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov.
- Tapered Stud: Yes
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Steering Type: Power
- Maximum Outside Diameter:
- 2.382
- 60.50
- Greaseable: No
- Ball Joint Assembly: Yes
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Stud Type: Threaded
- Adjustable: No
- Mount Plate Included: No
- Suspension Grade Type: Standard
- Stud Thread Pitch: 1.50
- Wear Indicator Included: No
- Cotter Pin Included: Yes
- Retaining Ring Included: Yes
- Stud Thread Length:
- 0.976
- 24.80
- Mounting Bolts Included: No
- Stud Tapered End 2 Diameter:
- 0.787
- 20.00
- Thread Direction: Counterclockwise (left)
- Washers Included: No
- Castle Nut Included: Yes
- Grease Fitting Included: Yes
- Attachments Included: No
- Stud Thread Diameter:
- 0.630
- 16.00
- Position(s): Front Lower
- Reinforced: No
- Dust Boot Included: Yes
- Stud Tapered End 1 Diameter:
- 0.685
- 17.40
- Bearing Type: Plastic
- Mounting Type: Press-in
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-8500, 4333060010, 48068-60010, 48069-60010, CMS86112, K500417
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota 4Runner | Front Lower |
- Ball Joint
- Knurled Type Press-In Type
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov.
- Tapered Stud: Yes
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Steering Type: Power
- Maximum Outside Diameter:
- 1.976
- 50.20
- Greaseable: No
- Ball Joint Assembly: Yes
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Stud Type: Threaded
- Adjustable: No
- Mount Plate Included: No
- Suspension Grade Type: Standard
- Stud Thread Pitch: 1.50
- Wear Indicator Included: No
- Cotter Pin Included: Yes
- Retaining Ring Included: Yes
- Stud Thread Length:
- 0.866
- 22.00
- Mounting Bolts Included: No
- Stud Tapered End 2 Diameter:
- 0.709
- 18.00
- Thread Direction: Counterclockwise (left)
- Washers Included: No
- Castle Nut Included: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Stud Thread Diameter:
- 0.551
- 14.00
- Position(s): Front Upper
- Reinforced: No
- Dust Boot Included: Yes
- Stud Tapered End 1 Diameter:
- 0.622
- 15.80
- Bearing Type: Plastic
- Mounting Type: Press-in
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota Tacoma | Front Upper |
- Ball Joint
- Knurled Type
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov.
- Tapered Stud: Yes
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Steering Type: Power
- Maximum Outside Diameter:
- 1.976
- 50.20
- Greaseable: No
- Ball Joint Assembly: Yes
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Stud Type: Threaded
- Adjustable: No
- Mount Plate Included: No
- Suspension Grade Type: Standard
- Stud Thread Pitch: 1.50
- Wear Indicator Included: No
- Cotter Pin Included: Yes
- Retaining Ring Included: Yes
- Stud Thread Length:
- 0.866
- 22.00
- Mounting Bolts Included: No
- Stud Tapered End 2 Diameter:
- 0.709
- 18.00
- Thread Direction: Counterclockwise (left)
- Washers Included: No
- Castle Nut Included: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Stud Thread Diameter:
- 0.551
- 14.00
- Position(s): Front Upper
- Reinforced: No
- Dust Boot Included: Yes
- Stud Tapered End 1 Diameter:
- 0.622
- 15.80
- Bearing Type: Plastic
- Mounting Type: Press-in
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-4817, 43310-39016, 4331034030, 4331035061, 4331035081, B90255XL, K90255, MK90255
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota Sequoia | Front Upper |
Showing 1 - 10 of 45 products
Loading...