Image
Product
Price
- Fuel Pump Module Assembly
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Fuel Filter Included: Yes
- Connector Gender: Female
- Voltage: 12
- Negative Ground: No
- Grade Type: Premium
- In Tank or External: In Tank
- Mounting Hardware Included: No
- Fuel Type: Gas
- Gasket Or Seal Material: Nitrile Rubber
- Connector Shape: Rectangle
- Fuel Tank Pressure Sensor Included: No
- Minimum Pressure: 58
- Outlet Quantity: 3
- Inlet Type: Strainer
- Installation Warnings: No
- Resistance Ohms Empty: 990
- Average Flow Rating: 32
- Lock Ring Included: No
- Average Current Draw: 13
- Maximum Pressure: 67
- Pump Type: Electric
- Resistance Ohms Full: 50
- Wire Harness Included: No
- Fuel Sending Unit Included: Yes
- Pump Design: Turbine
- Connector Quantity: 1
- Outlet Outside Diameter: 0.313
- Terminal Quantity: 4
- Gasket Or Seal Included: Yes
- Internal Or External Strainer: Internal
- Terminal Type: Blade
- Terminal Gender: Male
- Regulator Included: Yes
- Strainer Included: Yes
- Outlet Type: Quick Connect
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
6823 1311AA, 6823 1311AB, 6823 1311AC, A30484, C0796M, DFG1863, P77025M, SP7247M
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2016 - Jeep Cherokee | L | 2360 | 4 Cyl 2.4L | Sport | AWD | 144 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- OE Replacement
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Jeep Renegade | L | 2360 | 4 Cyl 2.4L | 144 |
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Jeep Patriot |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Jeep Patriot | Front Outer |
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Jeep Patriot |
- ABS Wheel Speed Sensor
- Except Off Road Suspension
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Mounting Hardware Included: No
- Wiring Harness Length:
- 34.68
- 881
- Length: 38.9
- Connector Quantity: 1
- Connector Shape: Square
- Terminal Quantity: 2
- Wiring Harness Included: Yes
- Position(s): Rear
- Terminal Type: Blade
- Terminal Gender: Male
- Delphi's ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
533178, 5S13957, 6814 1898AC, ABS2807, ALS2807
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Cherokee | L | 2360 | Rear | 4 Cyl 2.4L | 144 |
- ABS Wheel Speed Sensor
- with Off Road Suspension
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Mounting Hardware Included: No
- Wiring Harness Included: Yes
- Wiring Harness Length:
- 36.26
- 921
- Position(s): Rear
- Connector Quantity: 1
- Terminal Type: Blade
- Connector Shape: Rectangular
- Terminal Gender: Male
- Terminal Quantity: 2
- Delphi's ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
4779 897AC, 533177, 5S15512, ABS2806, ALS2806
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Cherokee | L | 2360 | Rear | 4 Cyl 2.4L | 144 |
- ABS Wheel Speed Sensor
- with Off Road Suspension
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Mounting Hardware Included: No
- Wiring Harness Included: Yes
- Wiring Harness Length:
- 27.48
- 698
- Length: 30.27
- Position(s): Front
- Connector Quantity: 1
- Terminal Type: Pin
- Terminal Gender: Male
- Terminal Quantity: 2
- Delphi's ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
533414, 5S15994, 6821 7205AB, ABS2814, ALS2814
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Cherokee | L | 2360 | Front | 4 Cyl 2.4L | 144 |
- Ball Joint
- Knurled Type Non-Adjustable Type OE Design Greasable
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov.
- Tapered Stud: Yes
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Steering Type: Power
- Maximum Outside Diameter:
- 2.126
- 54.00
- Greaseable: Yes
- Ball Joint Assembly: Yes
- Cotter Pin Hole: Yes
- Stud Threads Per Inch: 18
- Dust Boot Material: Rubber
- Stud Type: Threaded
- Adjustable: No
- Mount Plate Included: No
- Suspension Grade Type: Standard
- Wear Indicator Included: No
- Cotter Pin Included: Yes
- Retaining Ring Included: No
- Stud Thread Length:
- 0.906
- 23.00
- Mounting Bolts Included: No
- Stud Tapered End 2 Diameter:
- 0.752
- 19.10
- Thread Direction: Counterclockwise (left)
- Washers Included: No
- Castle Nut Included: Yes
- Grease Fitting Included: Yes
- Attachments Included: No
- Position(s): Front Upper
- Reinforced: No
- Dust Boot Included: Yes
- Stud Tapered End 1 Diameter:
- 0.624
- 15.85
- Bearing Type: Plastic
- Mounting Type: Press-in
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
68004085AA, 83500202, 8983500202, K3134T, K68004085AA, MK3134T
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Jeep Wrangler | Front Upper |
- Ball Joint
- Knurled Type Non-Adjustable Type
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov.
- Tapered Stud: Yes
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Steering Type: Power
- Greaseable: No
- Ball Joint Assembly: Yes
- Cotter Pin Hole: Yes
- Stud Threads Per Inch: 18
- Dust Boot Material: Rubber
- Stud Type: Threaded
- Adjustable: No
- Mount Plate Included: No
- Suspension Grade Type: Standard
- Wear Indicator Included: No
- Cotter Pin Included: Yes
- Retaining Ring Included: Yes
- Stud Thread Length:
- 1.102
- 28.00
- Mounting Bolts Included: No
- Stud Tapered End 2 Diameter:
- 0.831
- 21.10
- Thread Direction: Counterclockwise (left)
- Washers Included: No
- Castle Nut Included: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Position(s): Front Lower
- Reinforced: No
- Dust Boot Included: Yes
- Stud Tapered End 1 Diameter:
- 0.693
- 17.60
- Bearing Type: Plastic
- Mounting Type: Press-in
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5012432AA, 68004085AA, K3134T, K68004085AA, MK3185
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Jeep Wrangler | Front Lower |
Showing 1 - 10 of 25 products
Loading...