1970 Chevrolet Derale Parts
Choose a Model for your 1970 Chevrolet
Image
Product
Price
- 2" Aluminum Belt Fan Spacer
- 2" length with 5/8" female pilot
- 2" Aluminum Belt Fan Spacer
- Derale 2" Fan Spacer Kit
- Product Attributes:
- Male pilot diameter: 5/8
- Female pilot diameter: 5/8
- Length: 2
- Flange bolt spacing: 1-3/4-2-1/4
-
Features:
- 2" Aluminum Belt Fan Spacer
- This 2" belt driven fan spacer comes with a clear anodized finish and is designed to fit most domestic 5/8" pilot water pumps.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1970 - Chevrolet Chevelle | L | 4098 | 6 Cyl 4.1L | Greenbrier | 250 |
- Adjustable Electric Fan Controller, Push In Radiator Probe
- 2 Required
- Adjustable Electric Fan Controller, Push In Radiator Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Trigger: Ground Circuit
-
Features:
- Adjustable Electric Fan Controller, Push In Radiator Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a push-in radiator probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Chevrolet Camaro | L | 4097 | 6 Cyl 4.1L | 250 |
- Transmission Cooling Pan, Reduces Fluid Temps up to 50°F, Increase Capacity
- Transmission Cooling Pan, Reduces Fluid Temps up to 50°F, Increase Capacity
- Vehicles using Turbo 350 transmission
- Product Attributes:
- Tube depth: 2-3/8
- Temp bung size: 1/8 Npt
- Pan depth: 3-1/4
-
Features:
- Transmission Cooling Pan, Reduces Fluid Temps up to 50°F, Increase Capacity
- Derale's TH350 Transmission Cooling Pan #14200 uses air passing beneath the vehicle and redirects it to help lower transmission oil temperatures. With brazed, turbulator-equipped airway tubes passing through the lower section of the transmission pan for more efficient cooling, each is individually pressure tested to ensure a leak-free pan. We've included a much stronger magnetic drain plug and rubber/steel reusable washer, in addition to a 1/8" NPT temperature sender bung located in the side of the pan. Finished with a durable black two-stage coating, each pan also includes neoprene gasket and 1/8" NPT temperature sender plug.
Additional Fitment Information:
| Vehicle | Transmission |
|---|---|
| 1970 - Chevrolet C20 Suburban | Automatic |
- 16 Pass Electra-Cool Remote Transmission Cooler Kit, -6AN Inlets
- 16 Pass Electra-Cool Remote Transmission Cooler Kit, -6AN Inlets
- Remote Automatic Transmission Oil Cooler Kit
- Product Attributes:
- Airflow: Puller (reversible)
- Inlet dim: 8-3/4
- Width: 15-3/4
- CFM: 650
- Height: 11-1/2
- Mounting: 14-3/4 X 5-1/4
- Depth: 5
-
Features:
- 16 Pass Electra-Cool Remote Transmission Cooler Kit, -6AN Inlets
- With it's own air supply, the Electra-Cool Remote Transcooler can literally be mounted wherever space permits, making it a popular addition for performance compacts, hot rods, muscle cars and trucks. An efficient 16 pass tube and fin cooler coupled with a Tornado fan and aluminum brackets, this kit comes with a complete installation kit to install easily on all vehicles with 5/16" or 3/8" transmission cooler lines. Also included is an 180°F in-line thermostat for activating the electric fan. This is a durable, trouble-free way to add years to the life of your transmission, and perfect for medium to heavy-duty towing and hauling.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 1970 - Chevrolet El Camino | V | 6588 | Automatic | 8 Cyl 6.6L | 402 |
- Transmission Cooling Pan, Reduces Fluid Temps up to 50°F, Increase Capacity
- Transmission Cooling Pan, Reduces Fluid Temps up to 50°F, Increase Capacity
- Vehicles with Turbo 400 transmissions
- Product Attributes:
- Tube depth: 2
- Temp bung size: 1/8 Npt
- Pan depth: 2-7/8
-
Features:
- Transmission Cooling Pan, Reduces Fluid Temps up to 50°F, Increase Capacity
- Derale's TH400 Transmission Cooling Pan #14201 uses air passing beneath the vehicle and redirects it to help lower transmission oil temperatures. With brazed, turbulator-equipped airway tubes passing through the lower section of the transmission pan for more efficient cooling, each is individually pressure tested to ensure a leak-free pan. We've included a much stronger magnetic drain plug and rubber/steel reusable washer, in addition to a 1/8" NPT temperature sender bung located in the side of the pan. Finished with a durable black two-stage coating, each pan also includes neoprene gasket and 1/8" NPT temperature sender plug.
Additional Fitment Information:
| Vehicle | Transmission |
|---|---|
| 1970 - Chevrolet C10 Suburban | Automatic |
- 18" Standard Rotation Fan Clutch Fan, Black
- 18" Standard Rotation Fan Clutch Fan, Black
- 18" Fan Clutch Fan - Standard Rotation
- Product Attributes:
- Rotation: Standard (clockwise)
- Mounting surface to back: 1
- Diameter: 18
- Mounting surface to front: 1
- Flange bolt spacing: 3, 3-1/2
- Depth: 2
- Blade pitch: 27°
-
Features:
- 18" Standard Rotation Fan Clutch Fan, Black
- This standard rotation 18" fan clutch fan is designed to replace the factory fan, and the 8 hole center hub fits most OE fan clutches. Manufactured from sturdy steel hubs and fan blades, it produces maximum airflow. Comes in durable, attractive black powder coat finish.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1970 - Chevrolet El Camino | L | 4098 | 6 Cyl 4.1L | Custom | 250 |
- 18" Heavy Duty Stainless Steel Standard Rotation Flex Fan, Black Hub
- 18" Heavy Duty Stainless Steel Standard Rotation Flex Fan, Black Hub
- 18" Heavy-duty Flex Fan - Standard Rotation
- Product Attributes:
- Rotation: Standard (clockwise)
- Diameter: 18-1/4
- Mounting surface to rear: 2
- Mounting surface to front: 1/2
- Flange bolt spacing: 1-3/4-2-1/4
- Depth: 2-3/8
- Hub material: Powder Coated Black Steel
-
Features:
- 18" Heavy Duty Stainless Steel Standard Rotation Flex Fan, Black Hub
- This 18" heavy duty standard rotation fan features thick black steel hubs and 6 stainless reinforced blades with a large surface area that improve performance and fuel economy and is rated up to 10,000 rpm. The large surface area of the blades pull more air at lower speeds than other flex fans.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1970 - Chevrolet Chevelle | L | 4097 | 6 Cyl 4.1L | Concours | 250 |
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- 90 Degree Swivel Fitting Kit Included
- Product Attributes:
- BTU's Per Hour: 20000
- Inlet dim: 10
- Width: 13
- Height: 4-7/16
- Mounting: 12-1/4 X 2-7/8
- Depth: 2
-
Features:
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- With our top of the line 10 Row Stack Plate cooler, 90 Degree Swivel Fitting, this highly efficient kit extends transmission life by preventing heat-related transmission failures while also improving shifting performance. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1970 - Chevrolet Camaro | L | 4097 | Automatic | United States | 6 Cyl 4.1L | 250 |
- 8 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit, Full Size
- 16 5/8" x 10 1/4" x 3/4"
- 8 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit, Full Size
- 7000 Series 8 Pass 11/32" Hose Barb Kit
- Product Attributes:
- Inlet dim: 8-3/4
- GVW: 20500
- Width: 16-5/8
- Height: 10-1/4
- Mounting: 13-3/4
- Depth: 3/4
-
Features:
- 8 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit, Full Size
- This Tube & Fin transmission cooler features 1/2" copper tubing expanded into aluminum cooling fins and include embossed turbulators which serve to agitate fluid for maximum heat transfer. Perfect for full-size cars and medium size trucks and SUVs' that are used for part time towing, they improve shifting performance and extend the life of the transmission by eliminating heat-related transmission failures. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1970 - Chevrolet Bel Air | V | 7441 | Automatic | United States | 8 Cyl 7.4L | 454 |
- 6 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit, Intermediate
- 16 5/8" x 7 5/8" x 3/4"
- 6 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit, Intermediate
- 7000 Series 6 Pass 11/32" Hose Barb Kit
- Product Attributes:
- Inlet dim: 6-1/4
- GVW: 18500
- Width: 16-5/8
- Height: 7-5/8
- Mounting: 13-3/4
- Depth: 3/4
-
Features:
- 6 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit, Intermediate
- This Tube & Fin transmission cooler features 1/2" copper tubing expanded into aluminum cooling fins and includes embossed turbulators which serve to agitate fluid for maximum heat transfer. Perfect for medium-sized cars and compact trucks and SUVs' that see light duty towing, they improve shifting performance and extend the life of the transmission by eliminating heat-related transmission failures. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1970 - Chevrolet Brookwood | L | 4097 | Automatic | United States | 6 Cyl 4.1L | 250 |
Showing 1 - 10 of 30 products
Loading...