Image
Product
Price
- Transmission Cooling Pan; Reduces Fluid Temps up to 50deg.F; Increase Capacity
- 2-7/8 in. Pan Depth; 2 in. Tube Depth; 1/8 NPT Temp Bung Size
- Transmission Cooling Pan (GM TH400 Std)
- Transmission Cooling Pan
- Product Attributes:
- Trans Model: Gm- Th400 (auto) 3 Speed
-
Features:
- Heavy Gauge Stamped Steel Construction
- Two Stage Heat Dissipating Black Finish
- 1/8 in. NPT Temperature Sender Port
- Reduces Fluid Temperatures Up To 50 Degrees Fahrenheit
- Increases Fluid Capacity By 1 qts. 17 oz.
- Patented Turbulator Cooling Tubes Add Heat Transfer Capability
- Magnetic Drain Plug With Increased Magnetic Strength And Rubber/Steel Washer
- 2-7/8 in. Pan Depth
- Derale's TH400 Transmission Cooling Pan #14201 uses air passing beneath the vehicle and redirects it to help lower transmission oil temperatures. With brazed, turbulator-equipped airway tubes passing through the lower section of the transmission pan for more efficient cooling, each is individually pressure tested to ensure a leak-free pan. We've included a much stronger magnetic drain plug and rubber/steel reusable washer, in addition to a 1/8 in. NPT temperature sender bung located in the side of the pan. Finished with a durable black two-stage coating, each pan also includes neoprene gasket and 1/8 in. NPT temperature sender plug.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet K10 |
- 12in. Tornado Electric Puller Fan; Standard Mounting Kit
- 880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
- 12in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet K20 |
- 1in. Aluminum Belt Fan Spacer
- Aluminum Spacer Construction; Clear Anodize Color; 1 in. Length; 5/8 in. Male Pilot Diameter; 5/8 in. Or 3/4 in. Female Plot Diameter
- Fan Spacer; 1in. (Female 5/8-3/4 pilot)
- Belt Fan Spacer
-
Features:
- Aluminum Construction
- Anodized Clear Finish
- 1 in. Length w/5/8 in. Or 3/4 in. Female Pilot
- Includes Fine And Course 5/16 in. Thread Hardware
- Fan Should Have Minimum Clearance Of 3/4 in. From The Radiator
- This 1 in. belt driven fan spacer comes with a clear anodized finish and is designed to fit most domestic 5/8 in. or 3/4 in. pilot water pumps.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet G20 |
- 18in. Heavy Duty Stainless Steel Standard Rotation Flex Fan; Black Hub
- Stainless Steel; Black Hub; 18-1/4 in. Diameter; 1-3/4 in./2-1/4 in. Flange Bolt Spacing; 2-3/8 in. Depth; Standard Rotation/Clockwise
- 18in. HD Stnless Steel Flex Fan (Black Hub)
- Heavy Duty Flex Fan
-
Features:
- Improves Performance And Mileage
- Heavy Duty Steel Hubs
- Durable Stainless Blades
- Rated Up To 10.000 Revolutions Per Minute
- Large Surface Area Pulls More Air At Low Speeds
- Reinforced Blade Construction Extends Fan Life
- 18 in. Standard Rotation Flex Fan Design
- This 18 in. heavy duty standard rotation fan features thick black steel hubs and 6 stainless reinforced blades with a large surface area that improve performance and fuel economy and is rated up to 10,000 rpm. The large surface area of the blades pull more air at lower speeds than other flex fans.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1980 - Chevrolet Camaro | Base |
- 15 Row Atomic Cool Plate/Fin Remote Transmission Cooler Kit;-6AN
- Plate And Fin Cooler Style; 12-3/4 in. Width; 11-5/8 in. x 4 in. Mounting; 9-3/8 in. Height; 4-5/16 in. Depth; 8 in. Fan Size
- Atomic-Cool Transmission Cooler Kit (-6AN)
- Atomic Cool Remote Transmission Cooler Kit
-
Features:
- Mounts Anywhere Space Permits
- Electric Fan Supplies Optimum Airflow
- Dramatically Extends Engine And Transmission Life
- High Efficiency OEM Style Plate And Fin Cooler
- Clear Anodized Aluminum Shroud
- 500 CFM Reversible Tornado Electric Fan
- -6AN Inlet Size
- Transmission Cooler Kit Includes Fan Mounted Cooler
- Includes Two -6AN Barbed Hose Fittings
- Includes 180 Degrees Fahrenheit In-Line Thermostat
- Includes 5/16 in. and 3/8 in. Compression Fittings And Hardware
- A step up from Tube & Fin type coolers, the Atomic-Cool Remote Transcooler can literally be mounted almost anywhere, making it a popular addition for performance cars, hot rods, muscle cars and trucks. A heavy duty plate and fin cooler coupled with a Tornado fan and aluminum brackets, this kit comes with a complete installation kit to install easily on all vehicles with 5/16 in. or 3/8 in. transmission cooler lines. Also included is an 180°F in-line thermostat for activating the electric fan. The Atomic-Cool is designed for heavy duty towing and hauling, and can add years to the life of your transmission.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet C20 |
- 1/2in. Aluminum Belt Fan Spacer
- Aluminum Spacer Construction; Clear Anodize Color; 1/2 in. Length; 5/8 in. Male And Female Pilot Diameter; 1-3/4 in./2-1/4 in. Flange Bolt Spacing
- Fan Spacer; 1/2in. (Female 5/8 Pilot)
- Belt Fan Spacer
-
Features:
- Aluminum Construction
- Anodized Clear Finish
- 1/2 in. Length w/5/8 in. Female Pilot
- Includes Fine And Course 5/16 in. Thread Hardware
- Fan Should Have Minimum Clearance Of 3/4 in. From The Radiator
- This 1/2 in. belt driven fan spacer comes with a clear anodized finish and is designed to fit most domestic 5/8 in. pilot water pumps.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet G20 |
- 19in. Heavy Duty Stainless Steel Standard Rotation Flex Fan; Black Hub
- Stainless Steel; Black Hub; 19-1/4 in. Diameter; 1-3/4 in./2-1/4 in. Flange Bolt Spacing; 2-3/8 in. Depth; Standard Rotation/Clockwise
- 19in. HD Stnless Steel Flex Fan (Black Hub)
- Heavy Duty Flex Fan
-
Features:
- Improves Performance And Mileage
- Heavy Duty Steel Hubs
- Durable Stainless Blades
- Rated Up To 10.000 Revolutions Per Minute
- Large Surface Area Pulls More Air At Low Speeds
- Reinforced Blade Construction Extends Fan Life
- 19 in. Standard Rotation Flex Fan Design
- Our 19 in. heavy duty standard rotation fan features thick black steel hubs and 6 stainless reinforced blades with a large surface area that improve performance and fuel economy and is rated up to 10,000 rpm. The large surface area of the blades pull more air at lower speeds than other flex fans.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet Monte Carlo |
- 17in. High Performance Stainless Steel Standard Rotation Flex Fan; Black Hub
- Stainless Steel; Black Hub; 17 in. Diameter; 1-3/4 in./2-1/4 in. Flange Bolt Spacing; 1-1/8 in. Depth; 50 Degrees Blade Pitch; Standard Rotation
- 17in. HP Stnless Steel Flex Fan (Black Hub)
- High Performance Flex Fan
-
Features:
- Stainless Steel Fan Blades
- Black Powder Coated Hub
- Rated Up To 8.000 Revolutions Per Minute
- 17 in. Standard Rotation Flex Fan Design
- This 17 in. high performance, standard rotation flex fan features 6 stainless steel blades and a black powder coated hub and is rated for engine speeds up to 8,000 rpm. Great for applications where space is at a premium.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet Monza |
- 16 Pass Electra-Cool Remote Transmission Cooler Kit;-6AN Inlets
- 16 Pass Tube And Fin Cooler Style; 15-3/4 in. Width.; 14-3/4 in. x 5-1/4 in. Mounting; 11-1/2 in. Height; 5 in. Depth
- 16-Pass Electra-Cool Transmission Cooler Kit (-6AN)
- Electra-Cool Remote Transmission Cooler Kit
-
Features:
- Mounts Anywhere Space Permits
- Electric Fan Supplies Optimum Airflow
- Dramatically Extends Engine And Transmission Life
- 16 Pass Tube And Fin Cooler
- Clear Anodized Aluminum Shroud
- 650 CFM Reversible Tornado Electric Fan
- -6AN Inlet Size
- Rated At 250 PSI Working Pressure/300 PSI Burst Strength
- Transmission Cooler Kit Includes Fan Mounted Cooler
- Includes Two -6AN x 3/8 in. Barbed Hose Fittings
- Includes 180 Degrees Fahrenheit In-Line Thermostat
- Includes 5/16 in. and 3/8 in. Compression Fittings And Hardware
- With it's own air supply, the Electra-Cool Remote Transcooler can literally be mounted wherever space permits, making it a popular addition for performance compacts, hot rods, muscle cars and trucks. An efficient 16 pass tube and fin cooler coupled with a Tornado fan and aluminum brackets, this kit comes with a complete installation kit to install easily on all vehicles with 5/16 in. or 3/8 in. transmission cooler lines. Also included is an 180°F in-line thermostat for activating the electric fan. This is a durable, trouble-free way to add years to the life of your transmission, and perfect for medium to heavy-duty towing and hauling.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet El Camino |
Showing 1 - 10 of 25 products
Loading...