Image
Product
Price
- 13 Row Series 8000 Plate & Fin Transmission Cooler Kit, 11/32
- 13 Row Cooler
- 13 Row Series 8000 Plate & Fin Transmission Cooler Kit, 11/32
- 8000 Series Plate and Fin Transmission Cooler Kit
- Product Attributes:
- Inlet dim: 10-1/4
- GVW: 17500
- Width: 10-1/8
- Height: 7-1/4
- Mounting: 6-3/4 X 6-1/8
- Depth: 7/8
-
Features:
- 13 Row Series 8000 Plate & Fin Transmission Cooler Kit, 11/32
- A step up from Tube & Fin type coolers, this Plate and Fin cooler features strong furnace-brazed construction, 7/8" wide plates, 3/4" embossed turbulators which maximize heat transfer while also minimizing pressure drop. This unit is perfect for light to medium duty use and occasional towing. It greatly extends transmission life by preventing heat-related transmission failures, and improve shifting performance. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1992 - Mitsubishi Mighty Max | L | 2351 | Automatic | United States | 4 Cyl 2.4L | - |
- 1/2" Aluminum Belt Fan Spacer
- 1/2" length with 5/8" female pilot
- 1/2" Aluminum Belt Fan Spacer
- Derale 1/2" Fan Spacer Kit
- Product Attributes:
- Male pilot diameter: 5/8
- Female pilot diameter: 5/8
- Length: 1/2
- Flange bolt spacing: 1-3/4-2-1/4
-
Features:
- 1/2" Aluminum Belt Fan Spacer
- This 1/2" belt driven fan spacer comes with a clear anodized finish and is designed to fit most domestic 5/8" pilot water pumps.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1992 - Mitsubishi Mighty Max | L | 2351 | 4 Cyl 2.4L | Base | - |
- 17" High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- 1 Required
- 17" High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- High Performance
- Product Attributes:
- CFM high/low: 2400/1800
- Amp draw high/low: 23.5/17.4
- Width: 16-7/8
- Height: 16-7/8
- Mounting: 8-7/8 X 15-5/8
- Depth: 2-5/8
-
Features:
- 17" High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- Our most popular, this 17" High Output Single RAD fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 2400 CFM while drawing up to 23.5 amps.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Mitsubishi Montero | V | 2972 | 6 Cyl 3.0L | 181 |
- 2" Aluminum Belt Fan Spacer
- 2" length with 5/8" female pilot
- 2" Aluminum Belt Fan Spacer
- Derale 2" Fan Spacer Kit
- Product Attributes:
- Male pilot diameter: 5/8
- Female pilot diameter: 5/8
- Length: 2
- Flange bolt spacing: 1-3/4-2-1/4
-
Features:
- 2" Aluminum Belt Fan Spacer
- This 2" belt driven fan spacer comes with a clear anodized finish and is designed to fit most domestic 5/8" pilot water pumps.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1992 - Mitsubishi Mighty Max | L | 2351 | 4 Cyl 2.4L | Base | - |
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Switching activation: Ground
-
Features:
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8" NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Mitsubishi Diamante | V | 2972 | 6 Cyl 3.0L | 181 |
- Adjustable Electric Fan Controller, Push In Radiator Probe
- 1 Required
- Adjustable Electric Fan Controller, Push In Radiator Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Trigger: Ground Circuit
-
Features:
- Adjustable Electric Fan Controller, Push In Radiator Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a push-in radiator probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Mitsubishi Montero | V | 2972 | 6 Cyl 3.0L | 181 |
- Adjustable Electric Fan Controller, Push In Radiator Probe
- 2 Required
- Adjustable Electric Fan Controller, Push In Radiator Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Trigger: Ground Circuit
-
Features:
- Adjustable Electric Fan Controller, Push In Radiator Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a push-in radiator probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Mitsubishi Diamante | V | 2972 | 6 Cyl 3.0L | 181 |
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Push In Sensor Probe
- Product Attributes:
- Max Amp Draw: 25
-
Features:
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- This 180°F-on/165°F-off electric fan control kit is designed to activate up to 2 fans with a maximum draw of 25 amps. Includes a push-in radiator fin probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Mitsubishi Diamante | V | 2972 | 6 Cyl 3.0L | 181 |
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- BTU: 21000
- Cooler inlet size: -8an
- Adapter o-ring size: 2-3/4, 3-1/2
- Cooler height: 8-7/16
- Cooler inlet dim: 8-1/2
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum
- Adapter thickness: 1-3/4, 2-1/8
-
Features:
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- A step up from the popular tube and fin design this aluminum plate and fin-based oil cooler kit not only reduces oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures in the radiator and cooling system. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles on the road today.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Mitsubishi 3000GT | V | 2972 | 6 Cyl 3.0L | 181 |
- 14" Tornado Electric Puller Fan, Premium Mounting Kit
- 2 Required
- 14" Tornado Electric Puller Fan, Premium Mounting Kit
- Standard Duty, Premium Hardware Kit
- Product Attributes:
- Airflow: Puller (reversible)
- Blade size: 13-3/8
- Width: 14-1/2
- CFM: 1350
- Height: 13-5/8
- Mounting: 12-3/8 X 9
- Depth: 2
-
Features:
- 14" Tornado Electric Puller Fan, Premium Mounting Kit
- This extremely popular 14" reversible Tornado fan uses 8 skewed blades and its quiet, high torque electric motor producing a healthy 1350 CFM at 0 static pressure, drawing only 10.5 amps. Fan kit includes everything you will need for a manual switch installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Mitsubishi Diamante | V | 2972 | 6 Cyl 3.0L | 181 |
Showing 1 - 10 of 21 products
Loading...