2013 Chevrolet Fabtech Parts
Choose a Model for your 2013 Chevrolet
Image
Product
Price
- Single; For Stock Suspension w/13.5 in. Wide Tires/Fabtech 4 in. Ultimate System/May Fit 6 in Aftermarket Systems; PN[FTS21119] Required
- Tie Rod Assembly; Single; For Stock Suspension w/13.5 in. Wide Tires/Fabtech 4 in. Ultimate System/May Fit 6 in Aftermarket Systems; PN[FTS21119] Required;
- Tie Rod Assembly
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Not Just A Replacement Tie Rod End But An Heavy Duty Upgrade
- Fabtech Has Sourced These Heavy Duty Tie Rod Ends To
- Improve The Steering Strength And Service Life Of Your Vehicle
- Fabtechs Heavy Duty Tie Rod assemblies are designed to resist bending and breakage when running oversized tires. The extra large diameter Tie Rods are forged and are superior in strength to the inherent weak factory tie rods that are known for bending under light off road use. The Fabtech Tie Rod assemblies directly replace factory Tie Rods without modification to the centerlink or steering knuckles for a fast easy installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Chevrolet Silverado 3500 HD | Front |
- Stainless Steel; For PN[K1051DL/K1046DL]; w/6 in. Lift
- Dirt Logic 2.25 Shock Absorber; Stainless Steel; For PN[K1051DL/K1046DL];
- Dirt Logic 2.25 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Outstanding Performance And Longevity
- Billet Aluminum Top Cap And Rod End/Stainless Steel Body
- Urethane Bushings Reduce Noise And Rattle
- Tuned And Custom Fit Per Application
- The best shocks only get better with all new Stainless Steel and Aluminum construction. High grade 304 Stainless Steel shock bodies eclipse all other shocks on the market for maximum corrosion resistance. Each Stainless Steel shock body receives a finely detailed machine finish for a stunning appearance. Dirt Logic Stainless Steel reservoir shocks have been upgraded with black anodized 6061 Aluminum reservoir bodies. This includes both piggyback and remote reservoir shocks. The Aluminum resi construction allows for greater heat dissipation thereby keeping the shock cooler to reduce fade during aggressive offroad use. Finally each Dirt Logic piston rod has been upgraded to a NitroSteel(R) material that is super hard while providing increased corrosion resistance compared to chromed piston rods. Get the finest ride with maximum corrosion resistance only from Dirt Logic shocks. In addition to the specific Dirt Logics for each suspension system, there is also a line of universal Dirt Logic shocks available in reservoir and non-reservoir styles, ranging from 8 to 16 inches of stroke. These universal shocks are sold with universal hardware kits for easy installation. Dirt Logic 2.0 and 2.25 shocks feature urethane bushings in the mounting points to reduce road noise and rattling associated with spherical bearings. Dirt Logic coilover shocks utilize spherical bearings at each end for increased strength along with urethane misalignment cups in the top caps. The misalignment cups keep the road noise transferred through spherical bearings to a minimum. Dirt Logic 2.5 and 4.0 coilover shocks use coil springs made to the highest quality standards possible. All Dirt Logic coils posses the ability to go solid without breaking, settling or bowing. All Dirt Logic coilover shocks come preset with the proper amount of preload so they can be bolted on without any further adjustment necessary. Dirt Logics are available with or without an external reservoir.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2013 - Chevrolet Silverado 2500 HD | V | 6599 | Front | 8 Cyl 6.6L | 4WD | 403 |
- For PN[K1051/K1121/K1123/K1046]; 20.56 in. Extended Length; 12.75 in. Collapsed Length; 7.81 in. Stroke; w/6 in. Lift
- Performance Shock; For PN[K1051/K1121/K1123/K1046]; 20.56 in. Extended Length; 12.75 in. Collapsed Length; 7.81 in. Stroke;
- Performance Shock
- Product Attributes:
- Collapsed Length: 12.750 In.
- Shock Stroke: 7.810 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 20.560 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Designed To Work With Fabtech Lift Kits
- Excellent Dampening Capabilities
- High Flow 9 Stage Valving
- Twin Tube Hydraulic Construction
- 9/16 in. Hardened Chrome Piston Rod
- 1 3/8 in. OD Piston
- Closed Cell Foam Insert
- Polyurethane Bushing
- Fabtech Performance Shocks have been designed to work in conjunction with each of our suspension systems, resulting in superior ride control. Features include high velocity 9-stage valving for excellent dampening capabilities and a closed cell insert to reduce shock fade at high speeds.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2013 - Chevrolet Silverado 2500 HD | V | 6599 | Front | 8 Cyl 6.6L | 4WD | 403 |
- 4 in. Lift; Includes Spindles; Upper Control Arms; Steering Knuckles; Torsion Keys; Rear Shocks; All Required Hardware; w/DLSS Shocks
- Budget Lift System w/Shock; 4 in. Lift; Includes Spindles; Upper Control Arms; Steering Knuckles; Torsion Keys; Rear Shocks; All Required Hardware; w/DLSS Shocks;
- Budget Lift System w/Shock
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Fabtech Development Capabilities Are Second To None With
- With Over 20 Years Experience In Aftermarket Suspension Design
- State Of The Art Software Fabrication Equipment Along With Our
- Seasoned Engineers And Fabricators Allow The Company To Develop
- Products That Are Constantly On The Cutting Edge Fabtech Has
- Received Numerous Awards For Our Designs That Continue
- To Lead The Market
- Our 4 Ultimate System provides less lift than our 6 RTS(TM) system but still allows use of 33 or 35 tall tires with cutting for street and offroad use. We have developed this system utilizing replacement upper control arms constructed of 1.50 OD .120 thick wall DOM tubing that attaches to heavy duty Fabtech ductile iron steering knuckles. The factory torsion bars remain in the stock position and use new forged adjusting keys to provide the proper amount of lift. There is no loss of ground clearance with this system as the stock lower control arms, torsion bars and front differential do not need to be relocated. This 4 Ultimate System will level the stance of the vehicle compared to the factory nose down rake with no change to the rear suspension. For those customers that require a factory nose down appearance an optional 1 rear block kit is available (2500HD Part # FTS21110) (3500HD Part # FTS21111).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2013 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | Crew Cab Pickup | 403 |
- 4 in. Lift; Includes Uniball Upper Control Arms And DLSS Shocks
- Uniball Control Arm Lift System; 4 in. Lift; Includes Uniball Upper Control Arms And DLSS Shocks;
- Uniball Control Arm Lift System
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Fabtech Development Capabilities Are Second To None With
- With Over 20 Years Experience In Aftermarket Suspension Design
- State Of The Art Software Fabrication Equipment Along With Our
- Seasoned Engineers And Fabricators Allow The Company To Develop
- Products That Are Constantly On The Cutting Edge Fabtech Has
- Received Numerous Awards For Our Designs That Continue
- To Lead The Market
- The 4 Ultimate System is available with our Uniball Upper Control Arms that feature .120 wall 4130 Chromoly tubing with a 1.50 OD 1 FK Stainless PTFE Uniballs for 9 of front wheel travel. The system also includes heavy duty ductile iron steering knuckles and forged adjusting torsion bar keys to provide the proper amount of lift without CV bind. The system will level the stance of the vehicle compared to the factory nose down rake with no change to the rear suspension. For those customers that require a factory nose down appearance an optional 1 rear block kit is available (2500HD Part # FTS21110) (3500HD Part # FTS21111). Uniball Upper Control Arms are available separately as an upgrade to stock, previously installed Fabtech suspensions or other aftermarket suspension systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2013 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | Extended Cab Pickup | 403 |
- w/Performance Shocks; 4 in Lift; Includes Spindles; Upper Control Arms; Steering Knuckles; Torsion Keys; All Required Hardware
- Budget Lift System w/Shock; w/Performance Shocks; 4 in Lift; Includes Spindles; Upper Control Arms; Steering Knuckles; Torsion Keys; All Required Hardware;
- Budget Lift System w/Shock
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Retains Factory Front Coil Springs For Stock Ride
- This System Will Increase Offroad Capabilities
- And Provide A Good Highway Ride
- The 4 Budget System utilizes the factory front coil springs with a steel upper spacer providing 4 of lift. Radius Arm drop brackets retain the factory arms with correct caster setting for the increase ride height. System includes a Trac Bar relocation bracket that has been designed to center the axle under the vehicle and still works properly with the factory Pitman Arm. This eliminates the need to replace the Pitman Arm resulting in a lower cost and faster installation time. Rear lift is accomplished with lift blocks and extended length u-bolts. System allows installation of 35 tall tires with required inner fenderwell trimming for adequate tire clearance for street driving and light offroad use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2013 - Chevrolet Silverado 3500 HD | V | 5967 | 8 Cyl 6.0L | Crew Cab Pickup | 364 |
- For PN [K1122DL]/[K1124DL]; Stainless Steel;Front Right (Passenger) w/4 in. Lift
- Dirt Logic 2.25 Resi Front Shock; Front Right; For PN [K1122DL]/[K1124DL]; Stainless Steel;
- Dirt Logic 2.25 Resi Front Shock
- Product Attributes:
- Collapsed Length: Oem
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Outstanding Performance And Longevity
- Billet Aluminum Top Cap And Rod End
- Urethane Bushings Reduce Noise And Rattle
- Tuned And Custom Fit Per Application
- For the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2 diameter heavy wall links feature race style 1 Uniballs for superior strength. Thick 1/4 steel brackets secure the 4 Links to the frame without cutting or welding. The system also includes Sway Bar Drops, Trac Bar relocation bracket, Pitman Arm, and U-Bolt kit.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Chevrolet Silverado 3500 HD | Front Right |
- Stainless Steel; w/4 in. Lift
- Dirt Logic 2.25 Shock Absorber; Stainless Steel;
- Dirt Logic 2.25 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Outstanding Performance And Longevity
- Billet Aluminum Top Cap And Rod End/Stainless Steel Body
- Urethane Bushings Reduce Noise And Rattle
- Tuned And Custom Fit Per Application
- The best shocks only get better with all new Stainless Steel and Aluminum construction. High grade 304 Stainless Steel shock bodies eclipse all other shocks on the market for maximum corrosion resistance. Each Stainless Steel shock body receives a finely detailed machine finish for a stunning appearance. Dirt Logic Stainless Steel reservoir shocks have been upgraded with black anodized 6061 Aluminum reservoir bodies. This includes both piggyback and remote reservoir shocks. The Aluminum resi construction allows for greater heat dissipation thereby keeping the shock cooler to reduce fade during aggressive offroad use. Finally each Dirt Logic piston rod has been upgraded to a NitroSteel(R) material that is super hard while providing increased corrosion resistance compared to chromed piston rods. Get the finest ride with maximum corrosion resistance only from Dirt Logic shocks. In addition to the specific Dirt Logics for each suspension system, there is also a line of universal Dirt Logic shocks available in reservoir and non-reservoir styles, ranging from 8 to 16 inches of stroke. These universal shocks are sold with universal hardware kits for easy installation. Dirt Logic 2.0 and 2.25 shocks feature urethane bushings in the mounting points to reduce road noise and rattling associated with spherical bearings. Dirt Logic coilover shocks utilize spherical bearings at each end for increased strength along with urethane misalignment cups in the top caps. The misalignment cups keep the road noise transferred through spherical bearings to a minimum. Dirt Logic 2.5 and 4.0 coilover shocks use coil springs made to the highest quality standards possible. All Dirt Logic coils posses the ability to go solid without breaking, settling or bowing. All Dirt Logic coilover shocks come preset with the proper amount of preload so they can be bolted on without any further adjustment necessary. Dirt Logics are available with or without an external reservoir.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Chevrolet Silverado 2500 HD | V | 6599 | Front | 8 Cyl 6.6L | 403 |
- For 4 in. Lift; Includes Stealth Monotube Shocks; For PN[K1055M] Will Not Fit 17 in. Wheels. Stock 18 And 20 in. Tires/Wheels Can Be Used~Larger Tires Cannot Be Installed On OEM Wheels~4 in. Lift Use 35/13.50R18 Tire w/18x9 Wheel w/5.75 in. BS w/Minor Trimming~4 in. Lift Use 35/13.50R20 Tire w/20x9 Wheel w/5.75 in. BS w/Minor Trimming
- Component Box; For 4 in. Lift; Includes Stealth Monotube Shocks; For PN[K1055M];
- Component Box
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Simplified Design With Fast Install
- Steering Knuckles Retain Proper ESC
- No Loss Of Ground Clearance
- Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 2013 - Chevrolet Silverado 3500 HD | Crew Cab Pickup |
- w/Performance Shocks; 4 in. Lift; Includes Uniball Control Arm
- Uniball Control Arm Lift System; w/Performance Shocks; 4 in. Lift; Includes Uniball Control Arm;
- Uniball Control Arm Lift System
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Upper Control Arm Kit
- Custom Engineered For High Quality Ride
- Regulates Wheel Motion In Relation To Body
- Obtain increased wheel travel with a mild lift height with these heavy duty Upper Control Arm systems. The tubular Upper Control Arms feature 1.25 OD, .120 wall thick chromoly tube construction with 1 diameter Stainless Steel Uniballs that attach to the factory spindle without drilling. The replacement UCAs have been designed to work in conjunction with Fabtechs Dirt Logic 2.5 Coilover shocks providing 10 of wheel travel for a complete front suspension system upgrade. The vehicles offroad suspension performance will be greatly increased due to the extensive ride tuning of the Dirt Logic 2.5 Coilovers and rear Dirt Logic 2.25s.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2013 - Chevrolet Silverado 2500 HD | V | 6599 | 8 Cyl 6.6L | Crew Cab Pickup | 403 |
Showing 1 - 10 of 106 products
Loading...