Image
Product
Price
- Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required Use Offset Inlet/Offset Outlet Mufflers Only
- Tailpipe Set; Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Exit Position: Single Side
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- Aluminized Steel
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 53058 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1965 - Chevrolet Chevelle | L | 3769 | 6 Cyl 3.8L | Base | 230 |
- Dual; Dual Rear Exit; Includes 2.5 in. Tubing/X-Member Back/H-Pipe/Hardware/Super 40 Series(TM) Mufflers;Legal On Non-Emissions Controlled Vehicles Or For Race Use
- American Thunder Header Back Exhaust System; Dual; Dual Rear Exit; Includes 2.5 in. Tubing/X-Member Back/H-Pipe/Hardware/Super 40 Series™ Mufflers;
- American Thunder Header Back Exhaust System
- Product Attributes:
- Tip Quantity: 0
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- Inlet Diameter: 2.500 In.
- Sound Level: Moderate/aggressive
- WARNING CA Proposition 65: No
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- Exit Style: Straight
- Muffler Series: Super 40 Series
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear
- Tip Diameter: N/a
- Muffler Count: 2
- System Type: Header Back
- Muffler Part Number: 952548
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Moderate to Aggressive Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Connects After Factory Catalytic Converter
- Premium Flowmaster Quality
- Made in the USA
- 3 Year Limited Warranty
- This American Thunder(R) crossmember-back exhaust system is custom designed for most 1964-1972 GM A-body cars and is for the person looking for a complete 2.50-inch dual exhaust system with a moderately aggressive exterior tone and a moderate interior sound. With easy fit in mind, these aluminized steel systems feature all mandrel-bent tubing, an H-pipe to equalize the exhaust pressures for maximum performance and deep sound and includes a pair of specially selected Super 40(TM) mufflers. The mandrel-bent 2.50-inch tailpipes tuck up out of the way for maximum clearance and offer you two choices of tailpipe exit styles. Like all Flowmaster(R) systems, benefits include improved throttle response, power, and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for an easy installation and is covered by our 3-year Limited Warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1965 - Chevrolet Chevelle | L | 3180 | 6 Cyl 3.2L | 194 |
- 2.5 Offset In/2.5 Offset Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 2.5 Offset In/2.5 Offset Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Offset (opposite)
- WARNING CA Proposition 65: Yes
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 14.000 In.
- Main Piping Diameter: 2.500 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Clamp-on
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1965 - Chevrolet Chevelle | V | 4638 | 8 Cyl 4.6L | SS | 283 |
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel
- 40 Series™ Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- 40 Series™ Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: Oem
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
-
Features:
- 409 Stainless Steel
- Limited Lifetime Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1965 - Chevrolet Corvette | V | 6489 | 8 Cyl 6.5L | 396 |
- 40 Series™ Muffler
- 2.5 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel
- 40 Series™ Muffler; 2.5 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- 40 Series(TM) Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Outlet Connection Type: Pipe
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Outlet Position: Offset
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: Oem
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
-
Features:
- 410 Stainless Steel
- Limited Lifetime Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1965 - Chevrolet Chevelle | V | 6489 | 8 Cyl 6.5L | SS | 396 |
- 2.5 in. Offset Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Muffler; 2.5 in. Offset Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series™ Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Offset
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: Oem
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
- Excellent Street/Strip And Off Road Application
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1965 - Chevrolet Chevelle | V | - | 8 Cyl 4.6L | Deluxe | 283 |
- 40 Series™ Muffler
- 2.5 in. Offset Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Muffler; 2.5 in. Offset Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series(TM) Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Offset
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: Oem
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
- Excellent Street/Strip And Off Road Application
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1965 - Chevrolet Chevelle | V | - | 8 Cyl 4.6L | Deluxe | 283 |
- 50 Series™ Delta Flow Muffler
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- 50 Series™ Delta Flow Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel;
- 50 Series(TM) Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Outlet Connection Type: Pipe
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 50 Series Delta Flow
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: 2.500 In.
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 409 Stainless Steel
- Limited Lifetime Warranty
- Mild to Moderate Exterior Exhaust Tone
- Minimal Interior Resonance
- Excellent Choice For Street Rods Cars and Trucks
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The three chamber design utilizes Flowmaster's Delta Flow(R) technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1965 - Chevrolet Corvette | V | 6489 | 8 Cyl 6.5L | 396 |
- 2.5 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- 50 Series™ Delta Flow Muffler; 2.5 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel;
- 50 Series™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Offset
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 50 Series Delta Flow
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: 2.500 In.
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 409 Stainless Steel
- Limited Lifetime Warranty
- Mild to Moderate Exterior Exhaust Tone
- Minimal Interior Resonance
- Excellent Choice For Street Rods Cars and Trucks
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The three chamber design utilizes Flowmaster's Delta Flow(R) technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1965 - Chevrolet Chevelle | L | - | 6 Cyl 3.8L | Deluxe | 230 |
- 2 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Delta Flow Muffler; 2 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Offset
- Inlet Diameter: 2.000 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series Delta Flow
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: 2.000 In.
- Main Piping Diameter: 2.000 In.
- Inlet Position: Offset
- Inlet Outside Diameter: 2.000 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- Race Proven Patented Delta Flow® Technology
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- This two chamber design incorporates Flowmaster's Delta Flow(R) technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1965 - Chevrolet Impala | L | 4098 | 6 Cyl 4.1L | 250 |
Showing 1 - 10 of 29 products
Loading...