Image
Product
Price
- Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required
- Tailpipe Set; Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Exit Position: Single Side
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- Gray Color
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit out the sides behind the rear wheels. Designed to be used with Center Inlet/Side Outlet mufflers such as part# 942547 (Super 44 Series) or 53057 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Chevrolet C10 | V | - | 8 Cyl 5.0L | 305 |
- 3 in. Center In/2.5 in. Dual Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 3 in. Center In/2.5 in. Dual Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Dual Outlet
- WARNING CA Proposition 65: Yes
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Muffler Body Length: 14.000 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Center
- Inlet Connection Type: Clamp-on
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - GMC Jimmy | V | - | 8 Cyl 5.0L | 305 |
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel
- 40 Series™ Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- 40 Series™ Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: Oem
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
-
Features:
- 409 Stainless Steel
- Limited Lifetime Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Dodge W350 | V | - | 8 Cyl 5.9L | 360 |
- 40 Series™ Muffler
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel
- 40 Series™ Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- 40 Series(TM) Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Outlet Connection Type: Pipe
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: Oem
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
-
Features:
- 409 Stainless Steel
- Limited Lifetime Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Jeep CJ7 | L | - | 6 Cyl 4.2L | 258 |
- 2.25 Offset In/2.25 Center Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 2.25 Offset In/2.25 Center Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Center
- WARNING CA Proposition 65: Yes
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Inlet Inside Diameter: 2.250 In.
- Muffler Body Length: 14.000 In.
- Main Piping Diameter: 2.250 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Clamp-on
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - GMC S15 Jimmy | L | - | 4 Cyl 1.9L | 119 |
- 2.5 Offset In/2.5 Center Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 2.5 Offset In/2.5 Center Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Center
- WARNING CA Proposition 65: Yes
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 14.000 In.
- Main Piping Diameter: 2.500 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Clamp-on
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Chevrolet S10 | L | - | 4 Cyl 1.9L | 119 |
- 80 Series™ Cross-Flow Muffler
- 3.0 in. Offset Inlet/2.5 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 15 in.; 21 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 80 Series™ Cross-Flow Muffler; 3.0 in. Offset Inlet/2.5 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 15 in.; 21 in. Overall Length; Aluminized Steel;
- 80 Series(TM) Cross-Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Dual
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 80 Series Crossflow
- Outlet Outside Diameter: 2.500 In.
- Inlet Position: Offset
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Cross Flow Applications
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Pontiac Firebird | L | 2474 | 4 Cyl 2.5L | 151 |
- 3.0 in. Offset Inlet/2.5 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 15 in.; 21 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 80 Series™ Cross-Flow Muffler; 3.0 in. Offset Inlet/2.5 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 15 in.; 21 in. Overall Length; Aluminized Steel;
- 80 Series™ Cross-Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Dual
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 80 Series Crossflow
- Outlet Outside Diameter: 2.500 In.
- Inlet Position: Offset
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Cross Flow Applications
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Pontiac Firebird | L | 2474 | 4 Cyl 2.5L | 151 |
- 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- Super 40™ Delta Flow Muffler; 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel;
- Super 40™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Dual
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: Super 40 Series
- Outlet Outside Diameter: 2.500 In.
- Inlet Position: Center
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Stainless Steel
- Limited Lifetime Warranty
- Deep Aggressive to Moderate Exhaust Note
- Moderate Interior Resonance
- Excellent Performance On High Horsepower Vehicles
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
- Premium Flowmaster Quality
- The Super 40(R) features Flowmaster's Delta Flow(R) technology. It's larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series, but with a deeper tone, and all the benefits of extra performance and low interior resonance from the Delta Flow(R) technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
9530452
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Chevrolet K20 | V | - | 8 Cyl 5.7L | 350 |
- Super 40™ Delta Flow Muffler
- 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- Super 40™ Delta Flow Muffler; 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel;
- Super 40(TM) Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Outlet Connection Type: Pipe
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Outlet Position: Dual
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: Super 40 Series
- Outlet Outside Diameter: 2.500 In.
- Inlet Position: Center
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Stainless Steel
- Limited Lifetime Warranty
- Deep Aggressive to Moderate Exhaust Note
- Moderate Interior Resonance
- Excellent Performance On High Horsepower Vehicles
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
- Premium Flowmaster Quality
- The Super 40(R) features Flowmaster's Delta Flow(R) technology. It's larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series, but with a deeper tone, and all the benefits of extra performance and low interior resonance from the Delta Flow(R) technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Chevrolet K20 | V | - | 8 Cyl 5.7L | 350 |
Showing 1 - 10 of 54 products
Loading...