1986 Flowmaster Parts


Showing 1 - 10 of 80 products
Image
SKU
Product
Rating
Price

Flowmaster
  • Dual; Dual Rear Exit; Includes 2.5 in. Tailpipes/Super 44(TM) Delta Flow Mufflers/OEM Style Stainless Tips; 409 Stainless Steel;50 State Legal / California Emissions Compliant
  • American Thunder Cat Back Exhaust System; Dual; Dual Rear Exit; Includes 2.5 in. Tailpipes/Super 44™ Delta Flow Mufflers/OEM Style Stainless Tips; 409 Stainless Steel;
  • American Thunder Cat Back Exhaust System
  • Product Attributes:
    • Tip Quantity: 2
    • Tubing Diameter: 2.500 In.
    • Exhaust Type: Dual
    • California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
    • California Proposition 65 Chemical Name 1: Nickel (metallic)
    • Inlet Diameter: 2.500 In.
    • Sound Level: Aggressive
    • WARNING CA Proposition 65: Yes
    • Exhaust Series: American Thunder
    • Heat Shield Attached: No
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Exit Style: Straight
    • Muffler Series: Super 44 Series
    • Inlet Inside Diameter: N/a
    • Outlet Outside Diameter: 2.500 In.
    • Tail Pipe Diameter: 2.500 In.
    • Exit Position: Dual Rear
    • Tip Diameter: 2.500 In.
    • Muffler Count: 2
    • Single or Dual: Dual
    • System Type: Cat Back
    • Muffler Part Number: Kit Only
    • Outlet Diameter: 2.500 In.
  • Features:
    • Mandrel Bent Tubing
    • Includes Hangers And Hardware For Easy Installation
    • Dyno Tuned for Maximum Performance
    • Premium Flowmaster Quality
    • 3 Year Limited Warranty
    • Made in the USA
  • Our American Thunder exhaust system for 1986-1993 Ford Mustang LX (Fox body) with the 5.0L engine is a bolt-on emissions legal system. Features free-flowing 2.50-inch mandrel-bent stainless steel inlet pipes flowing into a pair of Super 44 Series mufflers for that deep iconic sound of the 5.0L engine. The 2.50-inch mandrel-bent stainless steel tailpipes use the factory hanger locations for a quick and easy installation and the system is finished off with a pair of long 2.50-inch 304 stainless steel tips for that show car look. Includes all necessary parts, hardware and easy to follow instructions and is covered by our Lifetime Limited Warranty. Note: Fits coupes and convertibles. Also fits 1986 Ford Mustang GT models with 5.0L engine
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
15630, 17213, 17393, 5092R4, BT9400, BX50935S, M31015

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1986 - Ford Mustang V - 8 Cyl 5.0L LX 302

Flowmaster
  • 49 State; 222 Series; 2.5 in. Inlet/Outlet; Slip Fit; Body Length 12.75 in./Width 5in.; Round; 5500 Max GVW; 5.9L Max Engine Size;Not Legal For Sale Or Use On Vehicles Registered In California
  • Universal Catalytic Converter; 49 State; 222 Series; 2.5 in. Inlet/Outlet; Slip Fit; Body Length 12.75 in./Width 5in.; Round; 5500 Max GVW; 5.9L Max Engine Size;
  • Universal Catalytic Converter
  • Product Attributes:
    • Oxygen Sensor Location: None
    • Gross Vehicle Weight: 5500 Lbs.
    • Outlet Connection Type: Slip-fit
    • Inlet Diameter: 2.500 In.
    • WARNING CA Proposition 65: No
    • CARB (California) Compliant: No
    • Style: 3-way
    • Inlet Inside Diameter: 2.500 In.
    • Outlet Outside Diameter: 2.500 In.
    • Outlet Quantity: 1
    • Heat Shield Included: Yes
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Inlet Quantity: 1
    • Body Shape: Round
    • Maximum Engine Size: 5.9l
    • Core Substrate Material: Ceramic
    • Air Tube Adaptable: No
    • Body Length: 12.750 In.
    • Inlet Connection Type: Slip-fit
    • Outlet Diameter: 2.500 In.
  • Features:
    • Standard Duty
    • Excellent Flow Characteristics
    • Engineered To Keep The MIL Light Off
    • Meets Federal EPA Emissions Requirements
    • Requires Welding And/Or Fabrication
    • 25000 Mile Emissions Warranty
    • 5 Year/50000 Mile Exterior Case Warranty
    • Stainless Steel
    • Made In The USA
  • Flowmaster Federal universal catalytic converters are designed to meet federal EPA emissions requirements on a wide variety of applications. These high quality catalytic converters are manufactured in the USA, and feature stainless steel outer shell construction for maximum durability. The internal substrate material and precious metal loading have been carefully engineered for maximum efficiency and to avoid MIL (Malfunction Indicator Lamp) code issues that are common with lower quality converters. Universal catalytic converters require welding and/or fabrication and should be installed by qualified technicians. Please refer to the Flowmaster application guide for specific part number/vehicle applications. Flowmaster Federal converters are not legal for sale or use on vehicles licensed or operated in the state of California.

Additional Fitment Information:
Vehicle Block CC Transmission Engine CID
1986 - Audi 5000 L 2226 Automatic 5 Cyl 2.2L -

Flowmaster
  • 40 Series™ Muffler
  • 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel
  • 40 Series™ Muffler; 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
  • 40 Series(TM) Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Muffler Type: Reflection
    • Outlet Position: Center
    • Inlet Diameter: 2.250 In.
    • Sound Level: Aggressive
    • WARNING CA Proposition 65: Yes
    • Fitment: Universal
    • Body Width: 9.750 In.
    • Inlet Type: Single Offset
    • Body Length: 13.000 In.
    • Inlet Outside Diameter: 2.250 In.
    • Inlet Connection Type: Pipe
    • Outlet Diameter: 2.500 In.
    • Mount Type: Uses New Hangers (not Included)
    • Automotive Item Grade: High Performance
    • California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
    • Outlet Connection Type: Pipe
    • California Proposition 65 Chemical Name 1: Nickel (metallic)
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Muffler Series: 40 Series
    • Overall Length: 19.000 In.
    • Inlet Inside Diameter: 2.250 In.
    • Outlet Outside Diameter: 2.250 In.
    • Main Piping Diameter: Oem
    • Shape: Oval
    • Inlet Position: Offset
    • Outlet Type: Single Center Outlet
  • Features:
    • 409 Stainless Steel
    • Limited Lifetime Warranty
    • Aggressive And Powerful Exterior Exhaust Tone
    • Notable Interior Resonance
    • Excellent Street/Strip And Off Road Application
    • No Internal Packing To Blowout
    • The Original Two Chamber Design
    • Premium Flowmaster Quality
  • The Original 40 series muffler delivers an aggressive exterior and interior tone. If youre looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Ford F-250 V - 8 Cyl 5.0L 302

Flowmaster
  • Super 44™ Delta Flow Muffler
  • 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
  • Super 44™ Delta Flow Muffler; 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
  • Super 44(TM) Delta Flow Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Muffler Type: Reflection
    • Outlet Position: Center
    • Inlet Diameter: 2.250 In.
    • Sound Level: Aggressive
    • WARNING CA Proposition 65: Yes
    • Fitment: Universal
    • Body Width: 9.750 In.
    • Inlet Type: Single Offset
    • Body Length: 13.000 In.
    • Inlet Outside Diameter: 2.250 In.
    • Inlet Connection Type: Pipe
    • Outlet Diameter: 2.500 In.
    • Mount Type: Uses New Hangers (not Included)
    • Automotive Item Grade: High Performance
    • California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
    • Outlet Connection Type: Pipe
    • California Proposition 65 Chemical Name 1: Nickel (metallic)
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Muffler Series: Super 44 Series
    • Overall Length: 19.000 In.
    • Inlet Inside Diameter: 2.250 In.
    • Outlet Outside Diameter: 2.250 In.
    • Main Piping Diameter: Oem
    • Shape: Oval
    • Inlet Position: Offset
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Stainless Steel
    • Limited Lifetime Warranty
    • Deep Aggressive Exhaust Note
    • Noticeable Interior Resonance
    • Recent Two Chamber Improvement
    • Race Proven Patented Delta Flow® Technology
    • No Internal Packing To Blowout
    • Premium Flowmaster Quality
  • Flowmasters Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler weve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
11225, 11365, 12225, 13215, 13235, 14225, 14325, 14362

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Ford F-150 V - 8 Cyl 5.0L 302

Flowmaster
  • 40 Series™ Delta Flow Muffler
  • 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
  • 40 Series™ Delta Flow Muffler; 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
  • 40 Series(TM) Delta Flow Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Muffler Type: Reflection
    • Outlet Position: Center
    • Inlet Diameter: 2.250 In.
    • Sound Level: Aggressive
    • WARNING CA Proposition 65: No
    • Fitment: Universal
    • Body Width: 9.750 In.
    • Inlet Type: Single Offset
    • Body Length: 13.000 In.
    • Inlet Outside Diameter: 2.250 In.
    • Inlet Connection Type: Pipe
    • Outlet Diameter: 2.500 In.
    • Mount Type: Uses New Hangers (not Included)
    • Automotive Item Grade: High Performance
    • Outlet Connection Type: Pipe
    • Muffler Series: 40 Series Delta Flow
    • Overall Length: 19.000 In.
    • Inlet Inside Diameter: 2.250 In.
    • Outlet Outside Diameter: 2.250 In.
    • Main Piping Diameter: 2.250 In.
    • Shape: Oval
    • Inlet Position: Offset
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • Race Proven Patented Delta Flow® Technology
    • Excellent Street/Strip And Off Road Application
    • No Internal Packing To Blowout
  • This two chamber design incorporates Flowmasters Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Chevrolet El Camino V - 6 Cyl 4.3L 262

Flowmaster
  • 40 Series™ Muffler
  • 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
  • 40 Series™ Muffler; 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
  • 40 Series(TM) Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Muffler Type: Reflection
    • Outlet Position: Center
    • Inlet Diameter: 2.250 In.
    • Sound Level: Aggressive
    • WARNING CA Proposition 65: No
    • Fitment: Universal
    • Body Width: 9.750 In.
    • Inlet Type: Single Offset
    • Body Length: 13.000 In.
    • Inlet Outside Diameter: 2.250 In.
    • Inlet Connection Type: Pipe
    • Outlet Diameter: 2.500 In.
    • Mount Type: Uses New Hangers (not Included)
    • Automotive Item Grade: High Performance
    • Outlet Connection Type: Pipe
    • Muffler Series: 40 Series
    • Overall Length: 19.000 In.
    • Inlet Inside Diameter: 2.250 In.
    • Outlet Outside Diameter: 2.250 In.
    • Main Piping Diameter: Oem
    • Shape: Oval
    • Inlet Position: Offset
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • Aggressive Exterior Exhaust Tone
    • Noticeable Interior Resonance
    • Excellent Street/Strip And Off Road Application
  • The Original 40 series muffler delivers an aggressive exterior and interior tone. If youre looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Chevrolet S10 V - 6 Cyl 2.8L 173

Flowmaster
  • 50 Series™ Delta Flow Muffler
  • 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
  • 50 Series™ Delta Flow Muffler; 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
  • 50 Series(TM) Delta Flow Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Muffler Type: Reflection
    • Outlet Position: Center
    • Inlet Diameter: 2.250 In.
    • Sound Level: Moderate
    • WARNING CA Proposition 65: No
    • Fitment: Universal
    • Body Width: 9.750 In.
    • Inlet Type: Single Offset
    • Body Length: 17.000 In.
    • Inlet Outside Diameter: 2.250 In.
    • Inlet Connection Type: Pipe
    • Outlet Diameter: 2.500 In.
    • Mount Type: Uses New Hangers (not Included)
    • Automotive Item Grade: High Performance
    • Outlet Connection Type: Pipe
    • Muffler Series: 50 Series Delta Flow
    • Overall Length: 23.000 In.
    • Inlet Inside Diameter: 2.250 In.
    • Outlet Outside Diameter: 2.250 In.
    • Main Piping Diameter: 2.250 In.
    • Shape: Oval
    • Inlet Position: Offset
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • 3 Year Limited Warranty
    • Mild to Moderate Exterior Exhaust Tone
    • Minimal Interior Resonance
    • Excellent Choice For Street Rods Cars and Trucks
    • Improved HP/TQ and Potential Mileage Improvement
    • Race Proven Patented Delta Flow® Technology
    • Premium Flowmaster Quality
  • The three chamber design utilizes Flowmasters Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Chevrolet Monte Carlo V - 8 Cyl 5.0L 305

Flowmaster
  • Super 40™ Delta Flow Muffler
  • 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
  • Super 40™ Delta Flow Muffler; 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel;
  • Super 40(TM) Delta Flow Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Automotive Item Grade: High Performance
    • Mount Type: Uses New Hangers (not Included)
    • Muffler Type: Reflection
    • California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
    • Outlet Connection Type: Pipe
    • California Proposition 65 Chemical Name 1: Nickel (metallic)
    • Outlet Position: Dual
    • Sound Level: Aggressive
    • WARNING CA Proposition 65: Yes
    • Fitment: Universal
    • Body Width: 10.000 In.
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Muffler Series: Super 40 Series
    • Overall Length: 19.500 In.
    • Outlet Outside Diameter: 2.500 In.
    • Shape: Oval
    • Inlet Type: Single Center
    • Inlet Position: Center
    • Body Length: 13.500 In.
    • Inlet Connection Type: Pipe
    • Outlet Diameter: 2.500 In.
    • Outlet Type: Dual Outlet
  • Features:
    • Durable Fully Welded 16ga Stainless Steel
    • Limited Lifetime Warranty
    • Deep Aggressive to Moderate Exhaust Note
    • Moderate Interior Resonance
    • Excellent Performance On High Horsepower Vehicles
    • Race Proven Patented Delta Flow® Technology
    • No Internal Packing To Blowout
    • Premium Flowmaster Quality
  • The Super 40 features Flowmasters Delta Flow technology. Its larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series, but with a deeper tone, and all the benefits of extra performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Chevrolet K20 V - 8 Cyl 5.7L 350

Flowmaster
  • 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
  • Super 40™ Delta Flow Muffler; 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel;
  • Super 40™ Delta Flow Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Automotive Item Grade: High Performance
    • Mount Type: Uses New Hangers (not Included)
    • Muffler Type: Reflection
    • California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
    • Outlet Connection Type: Pipe
    • California Proposition 65 Chemical Name 1: Nickel (metallic)
    • Outlet Position: Dual
    • Sound Level: Aggressive
    • WARNING CA Proposition 65: Yes
    • Fitment: Universal
    • Body Width: 10.000 In.
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Muffler Series: Super 40 Series
    • Overall Length: 19.500 In.
    • Outlet Outside Diameter: 2.500 In.
    • Shape: Oval
    • Inlet Type: Single Center
    • Inlet Position: Center
    • Body Length: 13.500 In.
    • Inlet Connection Type: Pipe
    • Outlet Diameter: 2.500 In.
    • Outlet Type: Dual Outlet
  • Features:
    • Durable Fully Welded 16ga Stainless Steel
    • Limited Lifetime Warranty
    • Deep Aggressive to Moderate Exhaust Note
    • Moderate Interior Resonance
    • Excellent Performance On High Horsepower Vehicles
    • Race Proven Patented Delta Flow® Technology
    • No Internal Packing To Blowout
    • Premium Flowmaster Quality
  • The Super 40 features Flowmasters Delta Flow technology. Its larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series, but with a deeper tone, and all the benefits of extra performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
9530452

Additional Fitment Information:
Vehicle Block CC Engine CID
1986 - Chevrolet K20 V - 8 Cyl 5.7L 350

Flowmaster
  • Super 44™ Delta Flow Muffler
  • 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
  • Super 44™ Delta Flow Muffler; 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
  • Super 44(TM) Delta Flow Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Muffler Type: Reflection
    • Outlet Position: Center
    • Inlet Diameter: 2.250 In.
    • Sound Level: Aggressive
    • WARNING CA Proposition 65: No
    • Fitment: Universal
    • Body Width: 9.750 In.
    • Inlet Type: Single Offset
    • Body Length: 13.000 In.
    • Inlet Outside Diameter: 2.250 In.
    • Inlet Connection Type: Pipe
    • Outlet Diameter: 2.500 In.
    • Mount Type: Uses New Hangers (not Included)
    • Automotive Item Grade: High Performance
    • Outlet Connection Type: Pipe
    • Muffler Series: Super 44 Series
    • Overall Length: 19.000 In.
    • Inlet Inside Diameter: 2.250 In.
    • Outlet Outside Diameter: 2.250 In.
    • Main Piping Diameter: Oem
    • Shape: Oval
    • Inlet Position: Offset
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • 3 Year Limited Warranty
    • Deep Aggressive Exhaust Note
    • Noticeable Interior Resonance
    • Recent Two Chamber Improvement
    • Race Proven Patented Delta Flow® Technology
    • No Internal Packing To Blowout
    • Premium Flowmaster Quality
  • Flowmasters Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler weve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1986 - Buick Regal V - 8 Cyl 5.0L Limited 307
Showing 1 - 10 of 80 products

Loading...