Image
Product
Price
- 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required
- Tailpipe Set; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Exhaust Pipe Bend Type: Assorted
- Tubing Diameter: 2.500 In.
- Exit Position: Dual Side
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Heat Shield Attached: No
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Dual Side Exit
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- Made in the USA
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit out the sides behind the rear wheels. Designed to be used with a Single Inlet/Dual 2.50-inch Outlet mufflers such as part# 9430452 (Super 44 Series) or 530552 (Super 50 Series) muffler. Covered by our 3-year Limited Warranty. Note: Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Chevrolet C1500 | V | - | 8 Cyl 5.0L | 305 |
- 2.5 in. Diameter Sold In Pairs; Includes Hangers; Offset Inlet/Offset Outlet Mufflers Required
- Tailpipe Set; 2.5 in. Diameter Sold In Pairs; Includes Hangers; Offset Inlet/Offset Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- Gray Color
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1991 - Ford Mustang | V | - | 8 Cyl 5.0L | GT | 302 |
- Dual; Dual Rear Exit; Includes 2.5 in. Outlet/Super 44 Delta Flow Mufflers;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Dual; Dual Rear Exit; Includes 2.5 in. Outlet/Super 44 Delta Flow Mufflers;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 0
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- Sound Level: Aggressive
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: No
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- Exit Style: Straight
- Muffler Series: Super 44 Series
- Inlet Inside Diameter: N/a
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear
- Tip Diameter: N/a
- Muffler Count: 2
- System Type: Cat Back
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Aggressive And Powerful Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- For the person who is looking for a complete cat-back dual exhaust system with an aggressive tone. With an easy fit in mind, these systems feature a mandrel-bent 2.50-inch aluminized steel inlet pipes flowing into a pair of Super 44(TM) Series mufflers for maximum performance and a deep powerful sound. The system utilizes the factory exhaust hangers for a quick and easy installation and the large 2.50-inch mandrel-bent tailpipes exit straight out the back with a turn down at the lower valance. The American Thunder(R) systems deliver a moderate to aggressive interior and exterior tone and are best suited to the enthusiast who wants their performance to be heard. Like all Flowmaster(R) systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Note: Fits Coupes and Convertibles. Check out optional our stainless steel system #817116 covered by our Lifetime Limited Warranty. All Aluminized steel exhaust systems are covered by our 3-year Limited Warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
14139, 15632, 817116, BX5093GT5S, M31016, TK8995
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1991 - Ford Mustang | V | - | 8 Cyl 5.0L | GT | 302 |
- Single; Single Side Exit; Includes 3 in. Tailpipe/70 Series(TM) Big Block II Muffler;50 State Legal / California Emissions Compliant
- Force II Cat Back System; Single; Single Side Exit; Includes 3 in. Tailpipe/70 Series™ Big Block II Muffler;
- Force II Cat Back System
- Product Attributes:
- Tip Quantity: 0
- Exhaust Type: Single
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Exhaust Series: Force Ii
- Heat Shield Attached: No
- Exit Style: Straight
- Muffler Series: 70 Series Big Block
- Inlet Inside Diameter: N/a
- Exit Position: Single Side
- Tip Diameter: N/a
- Muffler Count: 1
- System Type: Cat Back
- Muffler Part Number: 53070
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Mild Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- For the person who wants a subtle custom appearance with all the benefits that a Flowmaster(R) Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Our Force II(R) systems delivers a moderate exterior tone and mild to moderate interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. This system is constructed from large 3.00-inch mandrel-bent aluminized steel tubing flowing into a 70 Series Big Block II(TM) muffler for a deep mellow tone. The 3.00-inch tailpipe uses the factory hangers for a quick and easy installation and is finished off with a turn down style tip cut into the tubing. This exit location is especially recommended for towing applications since it will not be blowing exhaust on your boat or trailer. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Notes: Fits 2/4 wheel drive models and all wheelbases. Covered by our 3-year Limited Warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
619656, 817135
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 1991 - Ford F-150 | L | 4917 | 6 Cyl 4.9L | 81.0 | 300 |
- 80 Series™ Cross-Flow Muffler
- 3.0 in. Offset Inlet/2.5 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 15 in.; 21 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 80 Series™ Cross-Flow Muffler; 3.0 in. Offset Inlet/2.5 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 15 in.; 21 in. Overall Length; Aluminized Steel;
- 80 Series(TM) Cross-Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Dual
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 80 Series Crossflow
- Outlet Outside Diameter: 2.500 In.
- Inlet Position: Offset
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Cross Flow Applications
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Chevrolet Camaro | V | - | 6 Cyl 3.1L | 189 |
- 3.0 in. Offset Inlet/2.5 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 15 in.; 21 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 80 Series™ Cross-Flow Muffler; 3.0 in. Offset Inlet/2.5 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 15 in.; 21 in. Overall Length; Aluminized Steel;
- 80 Series™ Cross-Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Dual
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 80 Series Crossflow
- Outlet Outside Diameter: 2.500 In.
- Inlet Position: Offset
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Cross Flow Applications
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- Super 40™ Delta Flow Muffler; 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel;
- Super 40™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Dual
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: Super 40 Series
- Outlet Outside Diameter: 2.500 In.
- Inlet Position: Center
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Stainless Steel
- Limited Lifetime Warranty
- Deep Aggressive to Moderate Exhaust Note
- Moderate Interior Resonance
- Excellent Performance On High Horsepower Vehicles
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
- Premium Flowmaster Quality
- The Super 40(R) features Flowmaster's Delta Flow(R) technology. It's larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series, but with a deeper tone, and all the benefits of extra performance and low interior resonance from the Delta Flow(R) technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
9530452
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - GMC C1500 | V | - | 8 Cyl 5.7L | 350 |
- Super 40™ Delta Flow Muffler
- 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- Super 40™ Delta Flow Muffler; 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel;
- Super 40(TM) Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Outlet Connection Type: Pipe
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Outlet Position: Dual
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: Super 40 Series
- Outlet Outside Diameter: 2.500 In.
- Inlet Position: Center
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Stainless Steel
- Limited Lifetime Warranty
- Deep Aggressive to Moderate Exhaust Note
- Moderate Interior Resonance
- Excellent Performance On High Horsepower Vehicles
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
- Premium Flowmaster Quality
- The Super 40(R) features Flowmaster's Delta Flow(R) technology. It's larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series, but with a deeper tone, and all the benefits of extra performance and low interior resonance from the Delta Flow(R) technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Chevrolet K1500 | V | - | 8 Cyl 5.7L | 350 |
- 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 70 Series™ Big Block II Muffler; 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel;
- 70 Series™ Big Block II Muffler
- Product Attributes:
- Tip Quantity: 0
- Outlet Position: Dual
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Body Width: 10.000 In.
- Inlet Position: Center
- Muffler Series: 70 Series Big Block
- Outlet Outside Diameter: 2.500 In.
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Stock to Mild Exterior Exhaust Tone
- Minimal Interior Resonance
- Recommended For SUV/Trucks/Motorhomes/Tow Vehicles
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The 70 series utilizes Flowmaster's Delta Flow(R) technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV's, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Chevrolet K2500 | V | - | 8 Cyl 5.7L | 350 |
- 70 Series™ Big Block II Muffler
- 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 70 Series™ Big Block II Muffler; 3.0 in. Center Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel;
- 70 Series(TM) Big Block II Muffler
- Product Attributes:
- Tip Quantity: 0
- Outlet Position: Dual
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Body Width: 10.000 In.
- Inlet Position: Center
- Muffler Series: 70 Series Big Block
- Outlet Outside Diameter: 2.500 In.
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Stock to Mild Exterior Exhaust Tone
- Minimal Interior Resonance
- Recommended For SUV/Trucks/Motorhomes/Tow Vehicles
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The 70 series utilizes Flowmaster's Delta Flow(R) technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV's, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - GMC K1500 | V | - | 8 Cyl 5.7L | 350 |
Showing 1 - 10 of 105 products
Loading...