Image
Product
Price
- Single; Dual Rear Same Side Exit; Includes 2.5 in. Tailpipes/Super 40 Series(TM) Mufflers/3 in. Logo Embossed Stainless Tips;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Single; Dual Rear Same Side Exit; Includes 2.5 in. Tailpipes/Super 40 Series™ Mufflers/3 in. Logo Embossed Stainless Tips;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- Exhaust Type: Single
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Sound Level: Moderate
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: Super 40 Series
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear
- Muffler Count: 1
- Single or Dual: Dual
- System Type: Cat Back
- Muffler Part Number: Kit Only
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16ga Aluminized Tubing
- Moderate Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- This Flowmaster American Thunder cat-back exhaust system for the 2004-2008 Ford F-150 and Lincoln Mark LT trucks with the 4.6L or 5.4L engines is perfect for the person looking for a deep aggressive exterior sound with a moderate interior tone, and with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system features 16-gauge mandrel-bent aluminized steel tubing flowing into a specially designed Super 40 Series performance muffler with dual 2.50-inch aluminized steel tailpipes which use the factory hanger locations for an easy installation. The tailpipes exit either behind the rear wheels, which is ideal for towing, or straight out the back under the rear bumper for a muscular look. The system is finished off with a pair of large 3.00-inch polished stainless steel tips. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home. For those who prefer all stainless steel construction with a Lifetime Limited Warranty, check out exhaust system #817417. Note: Fits 2/4 wheel drive models all wheelbases.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
16520, 69523, 817417
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Ford F-150 | V | - | 8 Cyl 4.6L | 66.0 | XLT | Crew Cab Pickup | 281 |
- Single; Dual Rear Same Side Exit; Includes 2.5in. Outlets/Super 40 Series(TM) Muffler/3in. Logo Embossed Stainless Tips; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Single; Dual Rear Same Side Exit; Includes 2.5in. Outlets/Super 40 Series™ Muffler/3in. Logo Embossed Stainless Tips; 409 Stainless Steel;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- Exhaust Type: Single
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Sound Level: Moderate
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: Super 40 Series
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear Same Side
- Muffler Count: 1
- Single or Dual: Dual
- System Type: Cat Back
- Muffler Part Number: Kit Only
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16ga 409S Stainless Tubing
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- This Flowmaster American Thunder cat-back exhaust system for the 2004-2008 Ford F-150 and Lincoln Mark LT trucks with the 4.6L or 5.4L engines, is perfect for the person looking for a deep aggressive exterior sound with a moderate interior tone, and with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system features 16-gauge mandrel-bent stainless steel tubing flowing into a specially designed Super 40 Series performance muffler with dual 2.50-inch stainless steel tailpipes which use the factory hanger locations for an easy installation. The tailpipes exit either behind the rear wheels, which is ideal for towing, or straight out the back under the rear bumper for a muscular look. The system is finished off with a pair of large 3.00-inch polished stainless steel tips. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home. For those who prefer all aluminized steel construction with a 3-year Limited Warranty, check out exhaust system #17417. Note: Fits 2/4 wheel drive models all wheelbases.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
16520, 16523, 16615, 16616, 17417, 69523
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Ford F-150 | V | - | 8 Cyl 5.4L | 78.8 | XL | Standard Cab Pickup | 330 |
- Single; Single Side Exit; Includes 3 in. Outlet/50 Series(TM) SUV Muffler/3.5 in. Logo Embossed Stainless Tip;50 State Legal / California Emissions Compliant
- Force II Cat Back System; Single; Single Side Exit; Includes 3 in. Outlet/50 Series™ SUV Muffler/3.5 in. Logo Embossed Stainless Tip;
- Force II Cat Back System
- Product Attributes:
- Tip Quantity: 1
- Exhaust Type: Single
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Sound Level: Mild
- WARNING CA Proposition 65: Yes
- Exhaust Series: Force Ii
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: Super 50 Series
- Inlet Inside Diameter: N/a
- Exit Position: Single Side
- Muffler Count: 1
- Single or Dual: Single
- System Type: Cat Back
- Muffler Part Number: 53055
-
Features:
- Mandrel Bent 16ga Aluminized Tubing
- Aggressive And Powerful Exterior Exhaust Tone
- Stock to Mild Exterior Exhaust Tone
- Includes Hangers and Hardware For Easy Installation
- Connects After Factory Catalytic Converter
- Single Out Side Exit
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- The Force II system is the perfect choice for the person who wants a subtle custom appearance with all the benefits and sound that a Flowmaster single cat-back exhaust provides. The system delivers a moderate exterior tone and mild to moderate interior tone over the factory exhaust and ideally suited for customers looking for efficiency improvements without a lot of noise. This Force II system is a bolt-on system and bumps the tubing size up to a 3.00-inch mandrel-bent aluminized steel tubing flowing into the improved muffler design of the Super 50 Series muffler over the stock exhaust. The mandrel-bent tailpipe uses the factory hanger locations making installation a breeze and is finished off with a 3.50-inch polished stainless steel tip. The Force II system is ideal for daily drivers and especially light towing applications such as boats and RVs. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation you can do at home. Aluminized Steel exhaust systems are covered by our 3-year Limited Warranty Note: This Force II system is also available in Stainless Steel with a Lifetime Limited Warranty. Check out part# 817403. Fits both 2/4 wheel drive models and all wheelbases.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
140136, 16518, 619618, 817403
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Ford F-150 | V | - | 8 Cyl 4.6L | 96.0 | XL | Standard Cab Pickup | 281 |
- Dual; Dual Rear Same Side Exit; Includes 2.5 in. Tubing/Outlaw Mufflers/4 in. Black Coated Tips; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- Outlaw Series™ Cat Back Exhaust System; Dual; Dual Rear Same Side Exit; Includes 2.5 in. Tubing/Outlaw Mufflers/4 in. Black Coated Tips; 409 Stainless Steel;
- Outlaw Series™ Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Material: 409s Stainless Steel
- Muffler Overall Length: 19.500 In.
- Muffler Type: Reflection
- Tip Logo: Embossed
- Sound Level: Moderate/aggressive
- WARNING CA Proposition 65: Yes
- Tip Finish: Black Coated
- Muffler Color: Black
- Tip Length: 7.000 In.
- Tip Type: Double Wall
- Muffler Body Length: 6.500 In.
- Muffler Inlet Location: Offset
- Exit Position: Dual Out Rear
- Muffler Count: 2
- Muffler Finish: Painted
- Single or Dual: Dual
- System Type: Cat Back
- Tip Material: 304 Stainless Steel
- Muffler Outlet Location: Offset
- Muffler Outlet Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Mount Type: Uses Factory Hangers
- Exhaust Type: Cat-back
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Catalytic Converter Included: No
- Exhaust Series: Outlaw
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Series: Outlaw
- Tip Cut: Angle
- Inlet Inside Diameter: 2.500 In.
- Muffler Inlet Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Muffler Body Material: 409s Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- Tip Edge Style: Cut
- Muffler Part Number: Kit Only
-
Features:
- Stainless Steel Construction
- Super Aggressive Sound
- Black Ceramic Coated Tips
- Lifetime Limited Warranty
- Made in the USA
- The Outlaw Cat-back exhaust system for 2005-2010 Dodge Charger R/T, Magnum R/T and Chrysler 300C with the 5.7L Hemi engine is perfect for the person looking for an aggressive exterior and interior sound levels and who is not afraid of the attention. System features include dual 2.50-inch mandrel-bent stainless steel tubing going into a Scavenger Series X-pipe for maximum performance and sound, connecting to a pair of race-inspired Outlaw Series mufflers and mandrel bent tailpipes. The system is then finished off with 4.00-inch black ceramic coated stainless steel tips with embossed Flowmaster logos and exits out through the factory exhaust cutouts in the rear valance. Designed for an easy fit, this system includes all necessary parts, hardware and easy to follow installation instructions. Also fits all-wheel drive models.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2005 - Chrysler 300 | V | - | 8 Cyl 5.7L | C | 345 |
- Dual; 2.5 in. Tubing; 409S Stainless Steel/Natural/Brushed; 4.5 in. Dia./304 Stainless Steel/Black Ceramic Tip; L-24 in.;Non-Emissions Controlled Vehicles
- FlowFX Cat-Back Exhaust System; Dual; 2.5 in. Tubing; 409S Stainless Steel/Natural/Brushed; 4.5 in. Dia./304 Stainless Steel/Black Ceramic Tip; L-24 in.;
- FlowFX Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Dual Out Side
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 18.000 In.
-
Features:
- Offers An Aggressive To Moderate Sound Level And Increased Performance
- Includes Hangers And Hardware For An At Home Installation
- Factory Hangers Locations Used For An Easy Installation
- Covered By Out Lifetime Limited Warranty
- This Flowmaster[R] FlowFX[R] cat-back exhaust system for the 2005-2019 Nissan Frontier trucks with the 4.0 liter V6 engine is manufactured using durable 409 stainless steel throughout and features dual 2.50 in. mandrel bent pipes for better exhaust gas flow, and a FlowFX straight-through muffler is used for a moderate sound level and maximum performance. Maximum increases on the dyno revealed plus 8 hp and plus 6 lb.-ft at the rear wheels. This system exits out both sides, behind the rear wheels with 4.50 in. black ceramic tips for added style and a custom look. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmasters Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Nissan Frontier | V | 3954 | 6 Cyl 4.0L | 73.3 | Nismo Off-Road | Crew Cab Pickup | - |
- Dual; Dual Out Side Exit; Includes 2.5 in. Tubing/4.5 in. Black Ceramic Tip; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- FlowFX Cat-Back Exhaust System; Dual; Dual Out Side Exit; Includes 2.5 in. Tubing/4.5 in. Black Ceramic Tip; 409 Stainless Steel;
- FlowFX Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 4.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Dual Out Side
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 18.000 In.
-
Features:
- Mandrel Bent Tubing
- Easy Installation
- Limited Lifetime Warranty
- Deep Powerful Tone Inside And Outside The Vehicle
- FlowFX Straight Through Performance
- Our new Flowmaster FlowFX cat-back exhaust system for all 2005-2015 Toyota Tacoma trucks with the 4.0L engine is manufactured using durable 409 stainless steel tubing throughout and features a 2.50-inch inlet pipe leading to a FlowFX straight-through muffler for great sound and maximum performance. The dual 2.50-inch mandrel-bent tailpipes exit out the side at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50-inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance FlowFX sound. This system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes installation instructions and all necessary hardware for an easy installation that you can do at home.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2005 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | Extended Cab Pickup | 241 |
- Round; Single Dump Exit; 3.0 in. Tubing/Outlaw Muffler; Black; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- Outlaw Extreme Cat Back Exhaust System; Round; Single Dump Exit; 3.0 in. Tubing/Outlaw Muffler; Black; 409 Stainless Steel;
- Outlaw Extreme Cat Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat Back
- Exit Position: Single
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Offers a Deep Powerful Sound And Increased Performance
- Uses Factory Hanger Locations For Easy Installation
- Includes All Necessary Hardware For An At Home Installation
- Dump Style Exit
- Lifetime Limited Warranty
- Flowmaster introduces our new Outlaw Extreme stainless steel cat-back exhaust system for the 2005-2015 Toyota Tacoma with the 4.0L engine. This system uses an Outlaw series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing provides for maximum exhaust flow and durability. The system has a turndown style, dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation and its backed by Flowmasters Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2005 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 60.3 | Extended Cab Pickup | 241 |
- Includes Polyethylene Tubing/Air Dam/Red Cone Filter/Silicone Couplers/Stainless Steel Hardware; Air Filter Length 7.5 in.; Black Powdercoat;Not Legal For Sale Or Use In California
- Delta Force Cold Air Intake Kit; Includes Polyethylene Tubing/Air Dam/Red Cone Filter/Silicone Couplers/Stainless Steel Hardware; Air Filter Length 7.5 in.; Black Powdercoat;
- Delta Force Cold Air Intake Kit
- Product Attributes:
- Air Filter Heat Shield Material: Steel
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Air Filter Heat Shield Included: Yes
- Air Filter Element Color: Red
- CARB (California) Compliant: No
- Air Filter Overall Height: 7.500 In.
- Intake Pipe Inlet Shape: Round
- Coupler Material: Silicone
- Air Filter Outlet Shape: Cone
- Air Filter Outlet Length: 1.000 In.
- Air Filter Outside Diameter: 7.500 In.
- Air Filter Overall Width: 7.500 In.
- Clamp Quantity: 4
- Air Filter Overall Length: 7.500 In.
- Special Fitment Info: No
- Air Filter Large End Diameter: 7.500 In.
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: No
- Air Filter Inside Diameter: 6.000 In.
- California Proposition 65 Chemical Name 5: Benzene
- California Proposition 65 Chemical Name 4: Ethylbenzene
- California Proposition 65 Chemical Name 3: Chromium (hexavalent Compounds)
- Intake Pipe Ports: 1
- California Proposition 65 Chemical Name 2: Nickel (metallic)
- Air Filter Heat Shield Color: Black/powder Coated
- California Proposition 65 Chemical Name 1: Lead
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In.
- Intake Pipe Inlet Length: 2.000 In.
- Mass Air Flow Sensor Adapter Included : No
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Air Filter Oil Included: No
- Intake Pipe Outlet Length: 2.000 In.
- Air Filter End Cap Color: Black
- Air Filter Element Material: Cotton
- Vacuum Tubing Included: No
- Clamp Type: Worm Gear
- Air Box Included: No
-
Features:
- High Quality Components With Custom Look
- No Cutting or Drilling For Easy Installation
- Serviceable Lifetime High-Flow Filter
- No Tuning Required
- Limited Lifetime Warranty
- Made in the USA
- Take the performance of your vehicle to the next level with the addition of Flowmasters new Delta Force Performance Air Intake system for 2005-2021 Dodge Challenger R/T, Charger R/T, Magnum R/T and Chrysler 300C with 5.7L Hemi engines, along with 2006-2010 SRT8 models with 6.1L Hemi engines. The Delta Force system contains an ultra-trick looking, custom molded black Cross-Linked Polyethylene (XLPE) high-flow intake tube, black anodized aluminum fittings (when applicable), high quality reinforced silicone couplers and all stainless steel hardware. Other features include a large diameter high-flow conical shaped 8 layer cotton gauze air filter, which traps more dirt than typical 6 layer designs, a custom-fit black powder-coated air dam with attachment brackets to securely mount the system in place along with soft bumpers to eliminate any metal to metal contact under the hood. The Delta Force Air Filters are serviceable with our new Delta Force cleaning kits which will help outlast your vehicle. For maximum performance and that iconic Flowmaster exhaust tone, we highly recommend pairing your new Delta Force Performance Air Intake with a Flowmaster exhaust system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2005 - Chrysler 300 | V | - | 8 Cyl 5.7L | C | 345 |
- Single; Single Side Exit; 2.5 in. Outlet; 5x10 in. Muffler Assembly; 3.5 in. Rolled Edge Stainless Tip;50 State Legal / California Emissions Compliant
- American Thunder Axle Back Exhaust System; Single; Single Side Exit; 2.5 in. Outlet; 5x10 in. Muffler Assembly; 3.5 in. Rolled Edge Stainless Tip;
- American Thunder Axle Back Exhaust System
- Product Attributes:
- Tip Quantity: 1
- Tubing Diameter: 2.500 In.
- Exhaust Type: Single
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Inlet Diameter: 2.500 In.
- Sound Level: Moderate
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: 60 Series Delta Flow
- Inlet Inside Diameter: N/a
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Single Rear
- Muffler Count: 1
- Single or Dual: Single
- System Type: Axle Back
- Muffler Part Number: Kit Only
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16ga Aluminized Tubing
- Moderate Exterior Exhaust Tone
- Mild Exterior Exhaust Tone
- Includes Hangers and Hardware For Easy Installation
- Connects After Factory Catalytic Converter
- Dual Out Rear Exit
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- This American Thunder axle-back exhaust system is constructed from 16-gauge mandrel-bent aluminized steel and includes a pair of specially designed 60 Series performance muffler with the sound that goes hand in hand with the performance image of the Mustang. The muffler is finished off with large 4.00-inch polished stainless steel tips to fill out the exhaust cutouts in the rear valance for a muscular appearance that matches the sound. As an American Thunder system, it delivers a moderate interior tone and exterior sound that is suited to the enthusiast who wants their performance to be heard. Like all Flowmaster exhaust systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, the system includes all necessary parts and hardware for easy installation. Note: Fits both coupes and convertibles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15889, 40-2628, 40055, 619000, 817421
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2005 - Ford Mustang | V | - | 6 Cyl 4.0L | Base | 245 |
- Dual; Dual Rear Exit; Includes 5 in. x 10 in. Mufflers/4 in. Logo Embossed Stainless Tips;50 State Legal / California Emissions Compliant
- American Thunder Axle Back Exhaust System; Dual; Dual Rear Exit; Includes 5 in. x 10 in. Mufflers/4 in. Logo Embossed Stainless Tips;
- American Thunder Axle Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Inlet Diameter: 2.500 In.
- Sound Level: Moderate
- WARNING CA Proposition 65: Yes
- Exhaust Series: Force Ii
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Turn Down
- Muffler Series: 60 Series Delta Flow
- Inlet Inside Diameter: N/a
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear
- Muffler Count: 2
- Single or Dual: Dual
- System Type: Axle Back
- Muffler Part Number: Kit Only
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16ga Aluminized Tubing
- Moderate to Aggressive Exterior Exhaust Tone
- Moderate Exterior Exhaust Tone
- Includes Hangers and Hardware For Easy Installation
- Axle Back System
- Dual Out Rear Exit
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- Moderate Sound exterior exhaust tone
- This Force II axle-back exhaust system is constructed from 16-gauge mandrel-bent aluminized steel and includes a pair of specially designed 60 Series performance mufflers with the sound that goes hand in hand with the performance image of the car. The mufflers are finished off with large 4.00-inch polished stainless steel tips to fill out the exhaust cutouts in the rear valance for a muscular appearance that matches the sound. As a Force II system, it delivers a moderate exterior tone with moderate interior sound level that is suited to the enthusiast who wants their performance to be heard. Like all Flowmaster exhaust systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, the system includes all necessary parts and hardware for easy installation. Note: Fits both coupes and convertibles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
11750, 15882, 401423, 817410, M-5230-GTA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2005 - Ford Mustang | V | - | 8 Cyl 4.6L | GT | 281 |
Showing 1 - 10 of 132 products
Loading...