2007 Jeep Flowmaster Parts

Choose a Model for your 2007 Jeep


Showing 1 - 8 of 8 products
Image
SKU
Product
Rating
Price

Flowmaster
  • Round; Single Dump Exit; 3.0 in. Tubing; 3 in. Inlet/3 in. Outlet; Brushed Muffler; 409S Stainless Steel;50 State Legal / California Emissions Compliant
  • Outlaw Extreme Cat Back Exhaust System; Round; Single Dump Exit; 3.0 in. Tubing; 3 in. Inlet/3 in. Outlet; Brushed Muffler; 409S Stainless Steel;
  • Outlaw Extreme Cat Back Exhaust System
  • Product Attributes:
    • Exhaust Type: Cat Back
    • Exit Position: Single
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Offers a Deep Powerful Sound And Increased Performance
    • Uses Factory Hanger Locations For Easy Installation
    • Includes All Necessary Hardware For An At Home Installation
    • Dump Style Exit
    • Lifetime Limited Warranty
  • Flowmaster introduces our new Outlaw Extreme stainless steel cat-back exhaust system for the 2007-2018 Jeep Wrangler JK with the 3.6L/3.8L engines. This system uses an Outlaw series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing is used for maximum exhaust flow and durability. The system has a turndown style dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmasters Lifetime Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2007 - Jeep Wrangler V 3778 6 Cyl 3.8L Unlimited Rubicon 231

Flowmaster
  • 2.5 in. Tubing; 3 in. Polished Tip; 304 Stainless Steel; Muffler Delete;Non-Emissions Controlled Vehicles
  • American Thunder Axle Back Exhaust System; 2.5 in. Tubing; 3 in. Polished Tip; 304 Stainless Steel; Muffler Delete;
  • American Thunder Axle Back Exhaust System
  • Product Attributes:
    • Tubing Diameter: 2.500 In
    • Exit Position: Single
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Inside Diameter: 2.500 In
  • Features:
    • Max Dyno Gains Of 5 HP And 7 Lb.Ft. Torque
    • Provides Maximum Clearance For Off-Roading
    • Mandrel Bent Pipe Increases Exhaust Flow And Performance
    • Stainless Steel Construction Offers Great Corrosion Resistance
    • Utilizes The Factory Mounting Points For An Easy Installation
    • Moderate Sound Level
    • Backed By Flowmasters Lifetime Limited Warranty
  • The Flowmaster American Thunder Axle-back exhaust system for the 2007-2018 Jeep Wrangler JK is perfect for the enthusiast looking for maximum performance and ground clearance. The 2.50-inch tailpipe features a mandrel bent 409 stainless steel design for performance and corrosion resistance. The tailpipe is finished off with a 3.00-inch polished 304 stainless steel tip and fits both 2 and 4 door models with the 3.6L or 3.8L engine. This system replaces the factory transverse muffler reducing weight, improves ground clearance, and provides a moderate sound level. Because this system tucks the tailpipe up high, an aftermarket metal bumper is generally recommended. The exhaust system is covered by our Lifetime Limited Warranty. Designed for a perfect fit, this system includes all necessary parts and hardware for easy and quick installation you can do at home in about 15 minutes.

Additional Fitment Information:
Vehicle Block CC Engine CID
2007 - Jeep Wrangler V 3778 6 Cyl 3.8L 231

Flowmaster
  • Includes Polyethylene Tubing/Air Dam/Red Cone Filter/Silicone Couplers/Stainless Steel Hardware; Black Powdercoat;For Racing Use Only
  • Delta Force Cold Air Intake Kit; Includes Polyethylene Tubing/Air Dam/Red Cone Filter/Silicone Couplers/Stainless Steel Hardware; Black Powdercoat;
  • Delta Force Cold Air Intake Kit
  • Product Attributes:
    • Air Filter Heat Shield Material: Steel
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Air Filter Heat Shield Included: Yes
    • Air Filter Element Color: Red
    • CARB (California) Compliant: No
    • Air Filter Overall Height: 6.625 In.
    • Intake Pipe Inlet Shape: Round
    • Coupler Material: Silicone
    • Air Filter Outlet Shape: Round
    • Air Filter Outlet Length: 1.000 In.
    • Air Filter Outside Diameter: 7.500 In.
    • Air Filter Overall Width: 7.500 In.
    • Clamp Quantity: 4
    • Air Filter Overall Length: 6.625 In.
    • Special Fitment Info: No
    • Air Filter Large End Diameter: 7.500 In.
    • Intake Pipe Outlet Shape: Round
    • Intake Pipe Color: Black
    • Clamp Color: Natural
    • Clamp Material: Stainless Steel
    • Mass Air Flow Sensor Included: No
    • Air Filter Inside Diameter: 6.000 In.
    • California Proposition 65 Chemical Name 5: Benzene
    • California Proposition 65 Chemical Name 4: Ethylbenzene
    • California Proposition 65 Chemical Name 3: Chromium (hexavalent Compounds)
    • Intake Pipe Ports: 1
    • California Proposition 65 Chemical Name 2: Nickel (metallic)
    • Air Filter Heat Shield Color: Black/powder Coated
    • California Proposition 65 Chemical Name 1: Lead
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: Cross-linked Polyethylene
    • Air Filter Outlet Width: 6.000 In.
    • Intake Pipe Inlet Length: 2.000 In.
    • Mass Air Flow Sensor Adapter Included : No
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Air Filter Oil Included: No
    • Intake Pipe Outlet Length: 2.000 In.
    • Air Filter End Cap Color: Black
    • Air Filter Element Material: Cotton
    • Vacuum Tubing Included: No
    • Clamp Type: Worm Gear
    • Air Box Included: No
  • Features:
    • High Quality Components With Custom Look
    • No Cutting or Drilling For Easy Installation
    • Serviceable Lifetime High-Flow Filter
    • No Tuning Required
    • Limited Lifetime Warranty
    • Made in the USA
  • Take the performance of your vehicle to the next level with the addition of Flowmasters new Delta Force Performance Air Intake system for 2007-2011 Jeep Wrangler with 3.8L engine. The Delta Force system contains an ultra-trick looking, custom molded black Cross-Linked Polyethylene (XLPE) high-flow intake tube, black anodized aluminum fittings (when applicable), high quality reinforced silicone couplers and all stainless steel hardware. Other features include a large diameter high-flow conical shaped 8-layer cotton gauze air filter, which traps more dirt than typical 6-layer designs, a custom-fit black powder-coated air dam with attachment brackets to securely mount the system in place along with soft bumpers to eliminate any metal to metal contact under the hood. The Delta Force Air Filters are serviceable with our new Delta Force cleaning kits which will help outlast your vehicle. For maximum performance and that iconic Flowmaster exhaust tone, we highly recommend pairing your new Delta Force Performance Air Intake with a Flowmaster exhaust system. This kit is CARB compliant under EO# D-698-10.

This Part Fits the Following OEM/Substitute Numbers:
75-5084

Additional Fitment Information:
Vehicle
2007 - Jeep Wrangler

Flowmaster
  • Single Rear Exit; 2.5 in. Tubing; Super HP-2 Muffler; 3.0 in. Pol. Stainless Steel Tip;50 State Legal / California Emissions Compliant
  • American Thunder Cat Back Exhaust System; Single Rear Exit; 2.5 in. Tubing; Super HP-2 Muffler; 3.0 in. Pol. Stainless Steel Tip;
  • American Thunder Cat Back Exhaust System
  • Product Attributes:
    • Tip Quantity: 1
    • Tubing Diameter: 2.500 In.
    • Exhaust Type: Single
    • California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
    • California Proposition 65 Chemical Name 1: Nickel (metallic)
    • Inlet Diameter: 2.500 In.
    • Sound Level: Moderate
    • WARNING CA Proposition 65: Yes
    • Exhaust Series: American Thunder
    • Heat Shield Attached: No
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Exit Style: Turn Down
    • Tip Length: 3.750 In.
    • Muffler Series: Super Hp-2
    • Inlet Inside Diameter: 2.500 In.
    • Tail Pipe Diameter: 2.500 In.
    • Exit Position: Single Rear
    • Muffler Count: 1
    • Single or Dual: Dual
    • System Type: Cat Back
    • Muffler Part Number: Kit Only
    • Outlet Diameter: 2.500 In.
  • Features:
    • Mandrel Bent Stainless Steel Tubing
    • Provides Maximum Off Roading Clearance
    • Patented Laminar Flow Technology
    • Lifetime Limited Warranty
  • The new Flowmaster American Thunder cat-back exhaust system for the 2007-2018 Jeep Wrangler JK is perfect for the person looking for maximum performance and off-road ground clearance. This system replaces the factory transverse muffler and relocates the Super HP-2 muffler behind the factory catalytic converter, providing a moderate to aggressive sound level. The system features a mandrel-bent 2.50-inch stainless steel tailpipe with a 3.00-inch polished stainless steel tip tucked up high under the rear bumper for maximum clearance. Fits both 2 and 4 door models with either the 3.8L or 3.6L engines. Because the tailpipe is tucked up so high, an aftermarket metal bumper is recommended. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
2007 - Jeep Wrangler V 3778 6 Cyl 3.8L 231

Flowmaster
  • 50 Series™ Heavy Duty Muffler
  • 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 18 in.; 24 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
  • 50 Series™ Heavy Duty Muffler; 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 18 in.; 24 in. Overall Length; Aluminized Steel;
  • 50 Series(TM) Heavy Duty Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Automotive Item Grade: High Performance
    • Mount Type: Uses New Hangers (not Included)
    • Muffler Type: Reflection
    • Outlet Connection Type: Pipe
    • Outlet Position: Center
    • Sound Level: Moderate
    • WARNING CA Proposition 65: No
    • Fitment: Universal
    • Body Width: 10.000 In.
    • Muffler Series: 50 Series Hd
    • Overall Length: 23.000 In.
    • Shape: Oval
    • Inlet Type: Single Offset
    • Inlet Position: Offset
    • Body Length: 18.000 In.
    • Inlet Connection Type: Pipe
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • 3 Year Limited Warranty
    • Moderate to Aggressive Exterior Exhaust Tone
    • Reduced Interior Resonance
    • Excellent Choice For Street Rods Cars and Trucks
    • Improved HP/TQ and Potential Mileage Improvement
    • Race Proven Patented Delta Flow® Technology
    • Premium Flowmaster Quality
    • Mild Interior Resonance
    • Recommended for Dodge Ram Hemi and diesel trucks
  • Designed primarily for todays heavy duty gas and diesel trucks, this muffler will deliver improved performance, throttle response and mileage. Featuring a deeper, moderate tone with minimal resonance, it is ideal for trucks with modified engines. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2007 - Jeep Grand Cherokee V - 8 Cyl 5.7L Overland 345

Flowmaster
  • 50 Series™ SUV Muffler
  • 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
  • 50 Series™ SUV Muffler; 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
  • 50 Series(TM) SUV Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Automotive Item Grade: High Performance
    • Mount Type: Uses New Hangers (not Included)
    • Muffler Type: Reflection
    • Outlet Connection Type: Pipe
    • Outlet Position: Center
    • Sound Level: Mild
    • WARNING CA Proposition 65: No
    • Fitment: Universal
    • Body Width: 10.000 In.
    • Muffler Series: Super 50 Series
    • Overall Length: 23.000 In.
    • Shape: Oval
    • Inlet Type: Single Offset
    • Inlet Position: Offset
    • Body Length: 17.000 In.
    • Inlet Connection Type: Pipe
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • 3 Year Limited Warranty
    • Mild to Moderate Exterior Exhaust Tone
    • Minimal Interior Resonance
    • Excellent Choice for Large Displacement Vehicles
    • Improved HP/TQ and Potential Mileage Improvement
    • Race Proven Patented Delta Flow® Technology
    • Premium Flowmaster Quality
  • The Super 50 series muffler is a larger version of Flowmasters 50 series Delta Flow muffler. Originally designed for trucks and SUVs, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2007 - Jeep Grand Cherokee V - 8 Cyl 5.7L Overland 345

Flowmaster
  • 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
  • 50 Series™ SUV Muffler; 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
  • 50 Series™ SUV Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Automotive Item Grade: High Performance
    • Mount Type: Uses New Hangers (not Included)
    • Muffler Type: Reflection
    • Outlet Connection Type: Pipe
    • Outlet Position: Center
    • Sound Level: Mild
    • WARNING CA Proposition 65: No
    • Fitment: Universal
    • Body Width: 10.000 In.
    • Muffler Series: Super 50 Series
    • Overall Length: 23.000 In.
    • Shape: Oval
    • Inlet Type: Single Offset
    • Inlet Position: Offset
    • Body Length: 17.000 In.
    • Inlet Connection Type: Pipe
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • 3 Year Limited Warranty
    • Mild to Moderate Exterior Exhaust Tone
    • Minimal Interior Resonance
    • Excellent Choice for Large Displacement Vehicles
    • Improved HP/TQ and Potential Mileage Improvement
    • Race Proven Patented Delta Flow® Technology
    • Premium Flowmaster Quality
  • The Super 50 series muffler is a larger version of Flowmasters 50 series Delta Flow muffler. Originally designed for trucks and SUVs, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2007 - Jeep Grand Cherokee V - 8 Cyl 5.7L Overland 345

Flowmaster
  • 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 18 in.; 24 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
  • 50 Series™ Heavy Duty Muffler; 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 18 in.; 24 in. Overall Length; Aluminized Steel;
  • 50 Series™ Heavy Duty Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Automotive Item Grade: High Performance
    • Mount Type: Uses New Hangers (not Included)
    • Muffler Type: Reflection
    • Outlet Connection Type: Pipe
    • Outlet Position: Center
    • Sound Level: Moderate
    • WARNING CA Proposition 65: No
    • Fitment: Universal
    • Body Width: 10.000 In.
    • Muffler Series: 50 Series Hd
    • Overall Length: 23.000 In.
    • Shape: Oval
    • Inlet Type: Single Offset
    • Inlet Position: Offset
    • Body Length: 18.000 In.
    • Inlet Connection Type: Pipe
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • 3 Year Limited Warranty
    • Moderate to Aggressive Exterior Exhaust Tone
    • Reduced Interior Resonance
    • Excellent Choice For Street Rods Cars and Trucks
    • Improved HP/TQ and Potential Mileage Improvement
    • Race Proven Patented Delta Flow® Technology
    • Premium Flowmaster Quality
    • Mild Interior Resonance
    • Recommended for Dodge Ram Hemi and diesel trucks
  • Designed primarily for todays heavy duty gas and diesel trucks, this muffler will deliver improved performance, throttle response and mileage. Featuring a deeper, moderate tone with minimal resonance, it is ideal for trucks with modified engines. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2007 - Jeep Grand Cherokee V - 8 Cyl 5.7L Overland 345
Showing 1 - 8 of 8 products

Loading...