Image
Product
Price
- Dual; Dual Out Side Exit; Includes 2.5 in. Tubing/4.5 in. Black Ceramic Tip; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- FlowFX Cat-Back Exhaust System; Dual; Dual Out Side Exit; Includes 2.5 in. Tubing/4.5 in. Black Ceramic Tip; 409 Stainless Steel;
- FlowFX Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 4.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Dual Out Side
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 18.000 In.
-
Features:
- Mandrel Bent Tubing
- Easy Installation
- Limited Lifetime Warranty
- Deep Powerful Tone Inside And Outside The Vehicle
- FlowFX Straight Through Performance
- Our new Flowmaster FlowFX cat-back exhaust system for all 2005-2015 Toyota Tacoma trucks with the 4.0L engine is manufactured using durable 409 stainless steel tubing throughout and features a 2.50-inch inlet pipe leading to a FlowFX straight-through muffler for great sound and maximum performance. The dual 2.50-inch mandrel-bent tailpipes exit out the side at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50-inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance FlowFX sound. This system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes installation instructions and all necessary hardware for an easy installation that you can do at home.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2010 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | X-Runner | Extended Cab Pickup | 241 |
- Round; Single Dump Exit; 3.0 in. Tubing/Outlaw Muffler; Black; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- Outlaw Extreme Cat Back Exhaust System; Round; Single Dump Exit; 3.0 in. Tubing/Outlaw Muffler; Black; 409 Stainless Steel;
- Outlaw Extreme Cat Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat Back
- Exit Position: Single
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Offers a Deep Powerful Sound And Increased Performance
- Uses Factory Hanger Locations For Easy Installation
- Includes All Necessary Hardware For An At Home Installation
- Dump Style Exit
- Lifetime Limited Warranty
- Flowmaster introduces our new Outlaw Extreme stainless steel cat-back exhaust system for the 2005-2015 Toyota Tacoma with the 4.0L engine. This system uses an Outlaw series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing provides for maximum exhaust flow and durability. The system has a turndown style, dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation and its backed by Flowmasters Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2010 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | Pre Runner | Extended Cab Pickup | 241 |
- 3 in. Tubing; Single Dump Style Exit; 409 Stainless Steel; Includes Installation Hardware;50 State Legal / California Emissions Compliant
- FlowFX Extreme Cat-Back Exhaust System; 3 in. Tubing; Single Dump Style Exit; 409 Stainless Steel; Includes Installation Hardware;
- FlowFX Extreme Cat-Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat-back
- Exit Position: Single Out Dump
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Body Length: 14.000 In.
-
Features:
- Offers a Deep Powerful Sound And Increased Performance
- Includes All Necessary Hardware For An At Home Installation
- Dump Style Exit Allows For Better Ground Clearance When In Extreme Off-Road Conditions
- Uses Factory Hanger Locations For Easy Installation
- Lifetime Limited Warranty
- Flowmaster introduces our FlowFX Extreme stainless steel cat-back exhaust system for the 2007-2014 Toyota FJ Cruiser with the 4.0-liter engine. This system uses a FlowFX series muffler for an aggressive to moderate sound level and increased performance. 3.00-inch mandrel bent 409 stainless steel tubing allows for maximum exhaust flow and durability. The system has a turndown style, dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation. Backed by Flowmasters Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Toyota FJ Cruiser |
- 50 Series™ SUV Muffler
- 2.25 in. Dual Inlet/3 in. Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required~Adapters Needed For OEM Exhaust
- 50 Series™ SUV Muffler; 2.25 in. Dual Inlet/3 in. Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
- 50 Series(TM) SUV Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Mount Type: Uses New Hangers (not Included)
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.250 In.
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: Super 50 Series
- Overall Length: 23.000 In.
- Inlet Inside Diameter: 2.250 In.
- Main Piping Diameter: 2.250 In.
- Shape: Oval
- Inlet Type: Dual
- Inlet Position: Dual
- Body Length: 17.000 In.
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Mild to Moderate Exterior Exhaust Tone
- Minimal Interior Resonance
- Excellent Choice for Large Displacement Vehicles
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The Super 50 series muffler is a larger version of Flowmasters 50 series Delta Flow muffler. Originally designed for trucks and SUVs, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12278
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Toyota Tundra | V | 5663 | 8 Cyl 5.7L | 345 |
- Outlaw Series™ Cat Back Exhaust System
- Dual; Dual Rear Same Side Exit; 3.0 in. Tubing; Includes Outlaw Mufflers/4.0 in. Pol. Tips; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- Outlaw Series™ Cat Back Exhaust System; Dual; Dual Rear Same Side Exit; 3.0 in. Tubing; Includes Outlaw Mufflers/4.0 in. Pol. Tips; 409 Stainless Steel;
- Outlaw Series(TM) Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Muffler Type: Welded Baffle
- Tip Logo: Embossed
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Tip Finish: Black And Ceramic
- Tip Length: 13.000 In.
- Tip Type: Double Wall
- Exit Position: Dual Rear Same Side
- Muffler Count: 1
- Single or Dual: Dual
- System Type: Cat Back
- Tip Material: Stainless Steel
- Mount Type: Flanged
- Exhaust Type: Dual
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Catalytic Converter Included: No
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Heat Shield Attached: No
- Exhaust Series: Outlaw
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: Super 10 Series
- Tip Cut: Angle
- Shape: Oval
- Tip Shape: Round
- Tip Edge Style: Cut
- Muffler Part Number: Kit Only
-
Features:
- Stainless Steel Construction
- Aggressive Exterior Exhaust Tone
- Black Ceramic Coated Tips
- Lifetime Limited Warranty
- Made in the USA
- The Flowmaster Outlaw cat-back exhaust system for the 2009-2021 Toyota Tundra with either the 4.6L, 4.7L or 5.7L engine is perfect for the person looking for maximum sound levels both inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system features all stainless steel construction, an aggressive dual inlet Super 10 Series muffler flowing into large 3.00-inch dual tailpipes for maximum performance and sound. The system comes with two sets of tailpipe pipe exits for either a dual out the back look, or dual out behind the rear tires which is beneficial for towing. The tailpipes are finished off with large 4.00-inch black ceramic coated double wall stainless steel tips and includes all necessary parts and hardware for easy at home installation. Covered by our Lifetime Limited Warranty. Note: Fits 2/4 Wheel drives with 145-inch wheelbase. Does Not fit regular cab/short bed or double cab/long bed models. Only fits 2009 models built after 08/2008.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2010 - Toyota Tundra | V | 4608 | 8 Cyl 4.6L | 78.7 | Base | Standard Cab Pickup | - |
- Dual; Dual Out Side; Includes 2.5 in. Tubing/Muffler/Dual 4.5 in. Black Ceramic Coated Tips;50 State Legal / California Emissions Compliant
- FlowFX Cat-Back Exhaust System; Dual; Dual Out Side; Includes 2.5 in. Tubing/Muffler/Dual 4.5 in. Black Ceramic Coated Tips;
- FlowFX Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Dual Out Side
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 18.000 In.
-
Features:
- Large 4.5 in. Black Ceramic Coated Tips
- FlowFX Straight Through Performance
- Deep And Powerful Sound
- All Stainless Steel Construction For Long Life
- 2.50 in. Mandrel-Bent 16 Gauge Tubing Maximizes Exhaust Flow
- Clears The Factory Spare Tire
- Limited Lifetime Warranty
- This FlowFX Cat-back exhaust system is for 2009-2021 Toyota Tundra with 4.0L, 4.6L, 4.7L or 5.7L engine and is a bolt-on emissions legal system with a moderately aggressive exterior sound and a moderate interior tone. The system features all stainless steel construction for long life, and a specially designed dual inlet FlowFX straight-through performance muffler flowing into dual 2.50-inch mandrel-bent tailpipes for maximum performance. The tailpipes exit out the sides behind the rear wheels, which is beneficial for towing, and are finished off with a pair of large 4.50-inch black ceramic coated stainless steel tips for good looks. The system includes all necessary parts and hardware for easy at home installation and is covered by our Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2010 - Toyota Tundra | V | 5663 | 8 Cyl 5.7L | 78.7 | Standard Cab Pickup | 345 |
- Dual; Dual Out Passenger Side; Includes 2.5 in. Tubing/Muffler/Dual 4 in. Black Ceramic Coated Tips/Hardware; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- FlowFX Cat-Back Exhaust System; Dual; Dual Out Passenger Side; Includes 2.5 in. Tubing/Muffler/Dual 4 in. Black Ceramic Coated Tips/Hardware; 409 Stainless Steel;
- FlowFX Cat-Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Material: 409s Stainless Steel
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Tip Logo: Laser
- Sound Level: Moderate/aggressive
- WARNING CA Proposition 65: Yes
- Tip Finish: Black Ceramic Coated
- Muffler Color: Natural
- Tip Length: 5.250 In.
- Tip Type: Double Wall
- Muffler Body Length: 14.000 In.
- Muffler Inlet Location: Dual Inlet
- Exit Position: Dual Same Side
- Muffler Count: 1
- Muffler Finish: Brushed
- Single or Dual: Dual
- System Type: Cat Back
- Special Fitment Info: No
- Tip Material: 304 Stainless Steel
- Muffler Outlet Location: Dual Outlet
- Muffler Outlet Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Mount Type: Uses Factory Hangers
- Exhaust Type: Cat-back
- California Proposition 65 Chemical Name 2: Chromium
- California Proposition 65 Chemical Name 1: Nickel
- Catalytic Converter Included: No
- Exhaust Series: Flow Fx
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Series: Flow Fx
- Tip Cut: Angle
- Inlet Inside Diameter: 2.500 In.
- Muffler Inlet Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Muffler Body Material: 409s Stainless Steel
- Muffler Body Shape: Oval
- Tip Shape: Round
- Tip Edge Style: Cut
- Muffler Part Number: Kit Only
-
Features:
- Dyno Tuned for Maximum Performance
- Mandrel Bent Tubing
- Moderate/Aggressive Sound
- Easy Installation
- Limited Lifetime Warranty
- Introducing the new Flowmaster FlowFX Cat-back exhaust system for the 2009-2021 Toyota Tundra with 4.6L, 4.7L or 5.7L engine. This bolt-on emissions legal system is perfect for the person looking for an exhaust with a moderately aggressive interior and exterior tone with all of the performance benefits that you would expect from Flowmaster. Features include dual 2.50-inch stainless steel mandrel-bent inlet tubes flowing into a FlowFX straight-through performance muffler, giving a deep powerful tone outside the truck with a deep mellow tone inside the cab. The dual 2.50-inch tailpipes exit in front of the passenger side rear tire and are finished off with a pair of large 4.00-inch double wall black ceramic coated stainless tips. The system includes all necessary parts, hardware and detailed instructions for an easy at home installation. Notes: Fits 2/4 Wheel drives with 145-inch wheelbase. Does Not fit standard cab shortbed or Double cab long bed models.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Wheel FeedBase | Body | CID |
|---|---|---|---|---|---|---|---|---|
| 2010 - Toyota Tundra | V | 4608 | 8 Cyl 4.6L | 78.7 | Base | 145.7 | Crew Cab Pickup | - |
- Dual; Dual Rear Same Side Exit; 3.0 in. Tubing; Includes Outlaw Mufflers/4.0 in. Pol. Tips; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- Outlaw Series™ Cat Back Exhaust System; Dual; Dual Rear Same Side Exit; 3.0 in. Tubing; Includes Outlaw Mufflers/4.0 in. Pol. Tips; 409 Stainless Steel;
- Outlaw Series™ Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Muffler Type: Welded Baffle
- Tip Logo: Embossed
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Tip Finish: Black And Ceramic
- Tip Length: 13.000 In.
- Tip Type: Double Wall
- Exit Position: Dual Rear Same Side
- Muffler Count: 1
- Single or Dual: Dual
- System Type: Cat Back
- Tip Material: Stainless Steel
- Mount Type: Flanged
- Exhaust Type: Dual
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Catalytic Converter Included: No
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Heat Shield Attached: No
- Exhaust Series: Outlaw
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: Super 10 Series
- Tip Cut: Angle
- Shape: Oval
- Tip Shape: Round
- Tip Edge Style: Cut
- Muffler Part Number: Kit Only
-
Features:
- Stainless Steel Construction
- Aggressive Exterior Exhaust Tone
- Black Ceramic Coated Tips
- Lifetime Limited Warranty
- Made in the USA
- The Flowmaster Outlaw cat-back exhaust system for the 2009-2021 Toyota Tundra with either the 4.6L, 4.7L or 5.7L engine is perfect for the person looking for maximum sound levels both inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system features all stainless steel construction, an aggressive dual inlet Super 10 Series muffler flowing into large 3.00-inch dual tailpipes for maximum performance and sound. The system comes with two sets of tailpipe pipe exits for either a dual out the back look, or dual out behind the rear tires which is beneficial for towing. The tailpipes are finished off with large 4.00-inch black ceramic coated double wall stainless steel tips and includes all necessary parts and hardware for easy at home installation. Covered by our Lifetime Limited Warranty. Note: Fits 2/4 Wheel drives with 145-inch wheelbase. Does Not fit regular cab/short bed or double cab/long bed models. Only fits 2009 models built after 08/2008.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2010 - Toyota Tundra | V | 4608 | 8 Cyl 4.6L | 78.7 | Base | Standard Cab Pickup | - |
- Dual; Dual Rear Same Side Exit; 2.5 in. Tubing; 40 Series Big Block Mufflers; 3.5 in. Pol. Stainless Steel Tips;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Dual; Dual Rear Same Side Exit; 2.5 in. Tubing; 40 Series Big Block Mufflers; 3.5 in. Pol. Stainless Steel Tips;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Tip Length: 13.000 In.
- Muffler Series: 40 Series Big Block
- Inlet Inside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear Same Side
- Single or Dual: Dual
- System Type: Cat Back
- Muffler Part Number: Kit Only
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent Stainless Steel Tubing
- Multiple Exit Styles Provided In Kit
- Aggressive Performance Tone
- Lifetime Limited Warranty
- The American Thunder cat-back exhaust system for 2009-2021 Toyota Tundra trucks with the 4.6L, 4.7L or 5.7L engine is perfect for the person looking for an deep aggressive exterior tone with a mellow growl inside the truck and all of the performance benefits you expect from Flowmaster. This bolt-on emissions-legal system features all stainless steel construction, a specially designed dual inlet Super 40 Series muffler flowing into dual 2.50-inch mandrel-bent tailpipes for maximum performance with a deep tone. The kit comes with two sets of final pipes for either a dual out the back look or dual out behind the rear tires, which is beneficial for towing. The tailpipes are finished off with a pair of 3.50-inch double wall polished stainless steel tips. The system includes all necessary parts and hardware for easy at home installation. Note: Fits 2/4 wheel drive. Does not fit regular cab/short bed or double cab/long bed models. Only fits 2009 models built after 08/2008.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2010 - Toyota Tundra | V | 4608 | 8 Cyl 4.6L | 66.7 | Crew Cab Pickup | - |
- 50 Series™ SUV Muffler
- 2.5 in. Center Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 50 Series™ SUV Muffler; 2.5 in. Center Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
- 50 Series(TM) SUV Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Type: Reflection
- Outlet Position: Offset
- Inlet Diameter: 2.500 In.
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 10.000 In.
- Inlet Type: Single Center
- Body Length: 17.000 In.
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Outlet Diameter: 2.500 In.
- Mount Type: Uses New Hangers (not Included)
- Automotive Item Grade: High Performance
- Outlet Connection Type: Pipe
- Muffler Series: Super 50 Series
- Overall Length: 23.000 In.
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: 2.500 In.
- Shape: Oval
- Inlet Position: Center
- Outlet Type: Single Offset Outlet
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Mild to Moderate Exterior Exhaust Tone
- Minimal Interior Resonance
- Excellent Choice for Large Displacement Vehicles
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The Super 50 series muffler is a larger version of Flowmasters 50 series Delta Flow muffler. Originally designed for trucks and SUVs, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 241 |
Showing 1 - 10 of 13 products
Loading...