Image
Product
Price
- Includes Polyethylene Tubing/Air Dam/Red Cone Filter/Silicone Couplers/Stainless Steel Hardware; Air Filter Length 7.5 in.; Black Powdercoat;Not Legal For Sale Or Use In California
- Delta Force Cold Air Intake Kit; Includes Polyethylene Tubing/Air Dam/Red Cone Filter/Silicone Couplers/Stainless Steel Hardware; Air Filter Length 7.5 in.; Black Powdercoat;
- Delta Force Cold Air Intake Kit
- Product Attributes:
- Air Filter Heat Shield Material: Steel
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Air Filter Heat Shield Included: Yes
- Air Filter Element Color: Red
- CARB (California) Compliant: No
- Air Filter Overall Height: 7.500 In.
- Intake Pipe Inlet Shape: Round
- Coupler Material: Silicone
- Air Filter Outlet Shape: Cone
- Air Filter Outlet Length: 1.000 In.
- Air Filter Outside Diameter: 7.500 In.
- Air Filter Overall Width: 7.500 In.
- Clamp Quantity: 4
- Air Filter Overall Length: 7.500 In.
- Special Fitment Info: No
- Air Filter Large End Diameter: 7.500 In.
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: No
- Air Filter Inside Diameter: 6.000 In.
- Intake Pipe Ports: 1
- Air Filter Heat Shield Color: Black/powder Coated
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In.
- Intake Pipe Inlet Length: 2.000 In.
- Mass Air Flow Sensor Adapter Included : No
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Air Filter Oil Included: No
- Intake Pipe Outlet Length: 2.000 In.
- Air Filter End Cap Color: Black
- Air Filter Element Material: Cotton
- Vacuum Tubing Included: No
- Clamp Type: Worm Gear
- Air Box Included: No
-
Features:
- High Quality Components With Custom Look
- No Cutting or Drilling For Easy Installation
- Serviceable Lifetime High-Flow Filter
- No Tuning Required
- Limited Lifetime Warranty
- Made in the USA
- Take the performance of your vehicle to the next level with the addition of Flowmaster's new Delta Force(R) Performance Air Intake system for 2005-2021 Dodge Challenger R/T, Charger R/T, Magnum R/T and Chrysler 300C with 5.7L Hemi engines, along with 2006-2010 SRT8 models with 6.1L Hemi engines. The Delta Force system contains an ultra-trick looking, custom molded black Cross-Linked Polyethylene (XLPE) high-flow intake tube, black anodized aluminum fittings (when applicable), high quality reinforced silicone couplers and all stainless steel hardware. Other features include a large diameter high-flow conical shaped 8 layer cotton gauze air filter, which traps more dirt than typical 6 layer designs, a custom-fit black powder-coated air dam with attachment brackets to securely mount the system in place along with soft bumpers to eliminate any metal to metal contact under the hood. The Delta Force Air Filters are serviceable with our new Delta Force cleaning kits which will help outlast your vehicle. For maximum performance and that iconic Flowmaster(R) exhaust tone, we highly recommend pairing your new Delta Force Performance Air Intake with a Flowmaster exhaust system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | - | 8 Cyl 5.7L | C Luxury | 345 |
- Dual; 2.5 in. Tubing; 409S Stainless Steel/Natural/Brushed; 4.5 in. Dia./304 Stainless Steel/Black Ceramic Tip; L-24 in.;Non-Emissions Controlled Vehicles
- FlowFX Cat-Back Exhaust System; Dual; 2.5 in. Tubing; 409S Stainless Steel/Natural/Brushed; 4.5 in. Dia./304 Stainless Steel/Black Ceramic Tip; L-24 in.;
- FlowFX Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Dual Out Side
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 18.000 In.
-
Features:
- Offers An Aggressive To Moderate Sound Level And Increased Performance
- Includes Hangers And Hardware For An At Home Installation
- Factory Hangers Locations Used For An Easy Installation
- Covered By Out Lifetime Limited Warranty
- This Flowmaster(R) Flow FX(R) cat-back exhaust system for the 2005-2019 Nissan Frontier trucks with the 4.0-liter V6 engine is manufactured using durable 409 stainless steel throughout and features dual 2.50-inch mandrel bent pipes for better exhaust gas flow, and a Flow FX "straight-through" muffler is used for a moderate sound level and maximum performance. Maximum increases on the dyno revealed +8 hp and +6 lb-ft at the rear wheels. This system exits out both sides, behind the rear wheels with 4.50-inch black ceramic tips for added style and a custom look. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster's Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Nissan Frontier | V | 3954 | 6 Cyl 4.0L | 73.3 | SL | Crew Cab Pickup | - |
- Dual; Dual Out Side Exit; Includes 2.5 in. Tubing/4.5 in. Black Ceramic Tip; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- FlowFX Cat-Back Exhaust System; Dual; Dual Out Side Exit; Includes 2.5 in. Tubing/4.5 in. Black Ceramic Tip; 409 Stainless Steel;
- FlowFX Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 4.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Dual Out Side
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 18.000 In.
-
Features:
- Mandrel Bent Tubing
- Easy Installation
- Limited Lifetime Warranty
- Deep Powerful Tone Inside And Outside The Vehicle
- FlowFX Straight Through Performance
- Our new Flowmaster(R) Flow FX(R) cat-back exhaust system for all 2005-2015 Toyota Tacoma trucks with the 4.0L engine is manufactured using durable 409 stainless steel tubing throughout and features a 2.50-inch inlet pipe leading to a Flow FX "straight-through" muffler for great sound and maximum performance. The dual 2.50-inch mandrel-bent tailpipes exit out the side at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50-inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance Flow FX sound. This system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes installation instructions and all necessary hardware for an easy installation that you can do at home.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | Pre Runner | Extended Cab Pickup | 241 |
- Round; Single Dump Exit; 3.0 in. Tubing/Outlaw Muffler; Black; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- Outlaw Extreme Cat Back Exhaust System; Round; Single Dump Exit; 3.0 in. Tubing/Outlaw Muffler; Black; 409 Stainless Steel;
- Outlaw Extreme Cat Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat Back
- Exit Position: Single
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Offers a Deep Powerful Sound And Increased Performance
- Uses Factory Hanger Locations For Easy Installation
- Includes All Necessary Hardware For An At Home Installation
- Dump Style Exit
- Lifetime Limited Warranty
- Flowmaster introduces our new Outlaw Extreme stainless steel cat-back exhaust system for the 2005-2015 Toyota Tacoma with the 4.0L engine. This system uses an Outlaw series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing provides for maximum exhaust flow and durability. The system has a turndown style, dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation and it's backed by Flowmaster's Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 60.3 | Base | Extended Cab Pickup | 241 |
- Dual; Dual Rear Same Side Exit; Includes 2.5in. Tailpipes/Super 40 Series(TM) Mufflers/3.5in. Embossed Stainless Tips; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Dual; Dual Rear Same Side Exit; Includes 2.5in. Tailpipes/Super 40 Series™ Mufflers/3.5in. Embossed Stainless Tips; 409 Stainless Steel;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Muffler Type: Welded Baffle
- Tip Logo: Embossed
- Sound Level: Moderate/aggressive
- WARNING CA Proposition 65: Yes
- Tip Finish: Polished
- Tip Length: 13.000 In.
- Tip Type: Double Wall
- Exit Position: Dual Rear Same Side
- Muffler Count: 1
- System Type: Cat Back
- Tip Material: Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- Catalytic Converter Included: No
- Heat Shield Attached: No
- Exhaust Series: American Thunder
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Turn Out
- Muffler Series: Super 40 Series
- Tip Cut: Angle
- Inlet Inside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Tip Shape: Round
- Tip Edge Style: Cut
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent Tubing
- Aggressive Exterior Exhaust Tone
- Includes Hangers and Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- Patented Delta Flow Technology
- Lifetime Limited Warranty
- Made in the USA
- Our American Thunder cat-back exhaust system for 2007-2013 GM Silverado/Sierra 1500 with the 5.3L engine, is perfect for the person looking for moderately aggressive sound levels both inside and outside of the truck. This bolt-on emissions-legal system features 3.00-inch mandrel-bent stainless steel tubing flowing into a Super 40 Series muffler, for a deep powerful sound. The mandrel-bent 2.50-inch stainless steel tailpipes can be configured with your choice of exit locations, either straight out the back under the bumper for a muscular look, or exiting out behind the rear tires on each side of the truck. This is the ideal tailpipe location when towing a boat or RV. The tailpipes are finished off with large 3.50-inch double wall polished stainless steel tips. The system includes all necessary parts and hardware for an easy installation and is covered by our Lifetime Limited Warranty. Notes: Fits all 2/4 wheel drives with 143.5 and 157.5-inch wheelbases. Also fits 2007-2008 GM Silverado/Sierra 1500 with 4.8L engines and 143.5 and 157.5-inch wheelbases.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
817492, 817688
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Chevrolet Silverado 1500 | V | 5328 | 8 Cyl 5.3L | 97.8 | LS | Extended Cab Pickup | 325 |
- 2.5 in. Tubing; 3 in. Polished Tip; 304 Stainless Steel; Muffler Delete;Non-Emissions Controlled Vehicles
- American Thunder Axle Back Exhaust System; 2.5 in. Tubing; 3 in. Polished Tip; 304 Stainless Steel; Muffler Delete;
- American Thunder Axle Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.500 In
- Exit Position: Single
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In
-
Features:
- Max Dyno Gains Of 5 HP And 7 Lb.Ft. Torque
- Provides Maximum Clearance For Off-Roading
- Mandrel Bent Pipe Increases Exhaust Flow And Performance
- Stainless Steel Construction Offers Great Corrosion Resistance
- Utilizes The Factory Mounting Points For An Easy Installation
- Moderate Sound Level
- Backed By Flowmasters Lifetime Limited Warranty
- The Flowmaster American Thunder Axle-back exhaust system for the 2007-2018 Jeep Wrangler JK is perfect for the enthusiast looking for maximum performance and ground clearance. The 2.50-inch tailpipe features a mandrel bent 409 stainless steel design for performance and corrosion resistance. The tailpipe is finished off with a 3.00-inch polished 304 stainless steel tip and fits both 2 and 4 door models with the 3.6L or 3.8L engine. This system replaces the factory transverse muffler reducing weight, improves ground clearance, and provides a moderate sound level. Because this system tucks the tailpipe up high, an aftermarket metal bumper is generally recommended. The exhaust system is covered by our Lifetime Limited Warranty. Designed for a perfect fit, this system includes all necessary parts and hardware for easy and quick installation you can do at home in about 15 minutes.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jeep Wrangler |
- Single Rear Exit; 2.5 in. Tubing; Super HP-2 Muffler; 3.0 in. Pol. Stainless Steel Tip;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Single Rear Exit; 2.5 in. Tubing; Super HP-2 Muffler; 3.0 in. Pol. Stainless Steel Tip;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 1
- Tubing Diameter: 2.500 In.
- Exhaust Type: Single
- Sound Level: Moderate
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Turn Down
- Tip Length: 3.750 In.
- Muffler Series: Super Hp-2
- Inlet Inside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Single Rear
- Muffler Count: 1
- System Type: Cat Back
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent Stainless Steel Tubing
- Provides Maximum Off Roading Clearance
- Patented Laminar Flow Technology
- Lifetime Limited Warranty
- The new Flowmaster American Thunder cat-back exhaust system for the 2007-2018 Jeep Wrangler JK is perfect for the person looking for maximum performance and off-road ground clearance. This system replaces the factory transverse muffler and relocates the Super HP-2 muffler behind the factory catalytic converter, providing a moderate to aggressive sound level. The system features a mandrel-bent 2.50-inch stainless steel tailpipe with a 3.00-inch polished stainless steel tip tucked up high under the rear bumper for maximum clearance. Fits both 2 and 4 door models with either the 3.8L or 3.6L engines. Because the tailpipe is tucked up so high, an aftermarket metal bumper is recommended. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jeep Wrangler |
- Round; Single Dump Exit; 3.0 in. Tubing; 3 in. Inlet/3 in. Outlet; Brushed Muffler; 409S Stainless Steel;50 State Legal / California Emissions Compliant
- Outlaw Extreme Cat Back Exhaust System; Round; Single Dump Exit; 3.0 in. Tubing; 3 in. Inlet/3 in. Outlet; Brushed Muffler; 409S Stainless Steel;
- Outlaw Extreme Cat Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat Back
- Exit Position: Single
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Offers a Deep Powerful Sound And Increased Performance
- Uses Factory Hanger Locations For Easy Installation
- Includes All Necessary Hardware For An At Home Installation
- Dump Style Exit
- Lifetime Limited Warranty
- Flowmaster introduces our new Outlaw Extreme stainless steel cat-back exhaust system for the 2007-2018 Jeep Wrangler JK with the 3.6L/3.8L engines. This system uses an Outlaw series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing is used for maximum exhaust flow and durability. The system has a turndown style dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster's Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jeep Wrangler |
- Single; Dual Rear Same Side Exit; Includes 3 in. Tubing/50 HD Series(TM) Muffler/3.5 in. Polished Stainless Tips; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- Force II Cat Back System; Single; Dual Rear Same Side Exit; Includes 3 in. Tubing/50 HD Series™ Muffler/3.5 in. Polished Stainless Tips; 409 Stainless Steel;
- Force II Cat Back System
- Product Attributes:
- Tip Quantity: 2
- Exhaust Type: Single
- Sound Level: Moderate
- WARNING CA Proposition 65: Yes
- Exhaust Series: Force Ii
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: 50 Series Hd
- Exit Position: Dual Rear Same Side
- Muffler Count: 1
- System Type: Cat Back
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent 16ga 409 Stainless Steel Tubing
- Limited Lifetime Warranty
- Moderate Exterior Exhaust Tone
- Includes Hangers and Hardware For Easy Installation
- Connects After Factory Catalytic Converter
- Dual Out Rear Exit or Rear Side Exit
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- The Force II(R) Cat-back exhaust system for 2008-2013 Ford F-250/F-350 Super Duty trucks with a V8 or V10 gas engine is perfect for the person looking for mild to moderate sound levels with all of the performance benefits that you would expect from Flowmaster(R). This bolt-on emissions-legal system features a 50 HD Series(TM) performance muffler with large 4.00-inch internals and dual mandrel-bent 2.50-inch 409 stainless steel tailpipes for maximum performance and a deep powerful sound. The system comes with your choice of tailpipe exits and can be configured for either straight out the back under the rear bumper for a muscular look, or out the sides behind the rear wheels which is ideal for towing. The tailpipes are finished off with a pair of large 3.50-inch polished 304 stainless steel tips and is covered by our Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for easy installation you can do at home.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2013 - Ford F-250 Super Duty | V | 6210 | 8 Cyl 6.2L | 81.8 | 379 |
- 3 in. Tubing; Single Dump Style Exit; 409 Stainless Steel; Includes Installation Hardware;50 State Legal / California Emissions Compliant
- FlowFX Extreme Cat-Back Exhaust System; 3 in. Tubing; Single Dump Style Exit; 409 Stainless Steel; Includes Installation Hardware;
- FlowFX Extreme Cat-Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat-back
- Exit Position: Single Out Dump
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Body Length: 14.000 In.
-
Features:
- Offers a Deep Powerful Sound And Increased Performance
- Includes All Necessary Hardware For An At Home Installation
- Dump Style Exit Allows For Better Ground Clearance When In Extreme Off-Road Conditions
- Uses Factory Hanger Locations For Easy Installation
- Lifetime Limited Warranty
- Flowmaster introduces our Flow FX Extreme stainless steel cat-back exhaust system for the 2007-2014 Toyota FJ Cruiser with the 4.0-liter engine. This system uses a Flow FX series muffler for an aggressive to moderate sound level and increased performance. 3.00-inch mandrel bent 409 stainless steel tubing allows for maximum exhaust flow and durability. The system has a turndown style, dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation. Backed by Flowmaster's Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Toyota FJ Cruiser |
Showing 1 - 10 of 128 products
Loading...