1983 Ford Ford Performance Parts


Showing 1 - 10 of 31 products
Image
SKU
Product
Rating
Price

Ford Performance
  • 45 Deg. Boot; Red
  • 9mm Ignition Wire Set; 45 Deg. Boot; Red;
  • 9mm Ignition Wire Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • Boot Type: 45 Degree
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Engine: Ford Small Block
  • Features:
    • Wire-Wound Custom Ignition Wire
    • Features Low Resistance For Minimum Spark Loss
    • Silicone Insulation and Boots Withstand High Temps
    • Highly Resistant To Fuels/Oils/Solvents
    • Long Tough Stainless Steel Terminals
    • Includes Coil Wire for Socket-Type Coil
  • These 9mm wires feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable). The wires are numbered for each cylinder and have the "Ford Racing" script on them.

Additional Fitment Information:
Vehicle Block CC Engine Engine Version CID
1983 - Ford E-350 Econoline V 5753 8 Cyl 5.8L Windsor 351

Ford Performance
  • Designed For Use w/Smooth-Rail Oil Pans; 1 piece Rubber Bonded On Steel Reinforcement
  • Oil Pan Gasket; Designed For Use w/Smooth-Rail Oil Pans; 1 piece Rubber Bonded On Steel Reinforcement;
  • Oil Pan Gasket
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • One Piece
    • Rubber Bonded On Steel Reinforcement
  • When you need an oil pan gasket for your high performance Ford engine, why not get the ones designed by the folks who made the engine? These Ford Racing oil pan gaskets are a one-piece design that features rubber sealing material bonded to a solid steel core, for a strong, reliable seal.

Additional Fitment Information:
Vehicle Block CC Engine CID
1983 - Ford E-100 Econoline Club Wagon V - 8 Cyl 5.0L 302

Ford Performance
  • 45 Deg. Boot; Blue
  • 9mm Ignition Wire Set; 45 Deg. Boot; Blue;
  • 9mm Ignition Wire Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • Boot Type: 45 Degree
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Engine: Ford 429/460
  • Features:
    • Wire-Wound Custom Ignition Wire
    • Features Low Resistance For Minimum Spark Loss
    • Silicone Insulation and Boots Withstand High Temps
    • Highly Resistant To Fuels/Oils/Solvents
    • Long Tough Stainless Steel Terminals
    • Includes Coil Wire for Socket-Type Coil
  • These 9mm wires feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable). The wires are numbered for each cylinder and have the "Ford Racing" script on them.

Additional Fitment Information:
Vehicle Block CC Engine CID
1983 - Ford F-250 V - 8 Cyl 7.5L 460

Ford Performance
  • 45 Deg. Boot; Red
  • 9mm Ignition Wire Set; 45 Deg. Boot; Red;
  • 9mm Ignition Wire Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • Boot Type: 45 Degree
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Engine: Ford 429/460
  • Features:
    • Wire-Wound Custom Ignition Wire
    • Features Low Resistance For Minimum Spark Loss
    • Silicone Insulation and Boots Withstand High Temps
    • Highly Resistant To Fuels/Oils/Solvents
    • Long Tough Stainless Steel Terminals
    • Includes Coil Wire for Socket-Type Coil
  • These 9mm wires feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable). The wires are numbered for each cylinder and have the "Ford Racing" script on them.

Additional Fitment Information:
Vehicle Block CC Engine CID
1983 - Ford F-250 V - 8 Cyl 7.5L 460

Ford Performance
  • Valve Covers
  • Die-Cast Aluminum w/Baffle; Black Satin Finish; Cobra Logo
  • Valve Covers; Die-Cast Aluminum w/Baffle; Black Satin Finish; Cobra Logo;
  • Valve Cover
  • Product Attributes:
    • Valve Cover Style: Oem
    • WARNING CA Proposition 65: No
    • Cylinder Head Type: Standard
    • Engine Make/Size:
      • Ford 289-302
      • Ford 289-351w
  • Features:
    • Die Cast Aluminum With Baffle
    • Black Satin Finish
    • Cobra Powered By Ford Logo
    • May Require Modification For Roller Rockers
    • Includes Oil Fill Cap/Grommets
    • Made in the USA
  • What's a high performance Ford without a set of Ford Racing valve covers? Take your pick from die-cast aluminum covers with a smooth or finned design in either a polished or satin black finish. The valve covers are available in a variety of styles with an array of logos that are sure to add an individual touch to your Ford.

Additional Fitment Information:
Vehicle Block CC Engine CID
1983 - Ford E-250 Econoline V - 8 Cyl 5.0L 302

Ford Performance
  • Designed For 0.669 in. Diameter Input Shaft
  • Roller Pilot Bearing; Designed For 0.669 in. Diameter Input Shaft;
  • Roller Pilot Bearing
  • Product Attributes:
    • Inside Diameter: 0.669 In.
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Roller Pilot Bearing
  • These Ford Racing roller pilot bearings are direct replacements. When you install a new clutch, just pick up one of these to obtain less friction and longer life out of your clutch assembly.

Additional Fitment Information:
Vehicle Block CC Transmission Engine Engine Version CID
1983 - Ford E-150 Econoline V 5753 Manual 8 Cyl 5.8L Windsor 351

Ford Performance
  • Includes Rear Sump Pan; Dipstick/Dipstick Tube; Pickup And Main Cap Stud; 351W Into Fox Chassis
  • Engine Swap Oil Pan Kit; Includes Rear Sump Pan; Dipstick/Dipstick Tube; Pickup And Main Cap Stud; 351W Into Fox Chassis;
  • Engine Swap Oil Pan Kit
  • Product Attributes:
    • Usage: Street/performance
    • WARNING CA Proposition 65: No
    • Engine Make/Size: Ford 351w
  • Features:
    • Rear Sump
    • 5 Quart Capacity
    • Painted Finish
    • Made in the USA
  • Whether you're dressing up or simply replacing an old oil pan on your vehicle, Ford Racing has the oil pan for you. These Ford oil pans are available in several finishes for a variety of applications, so there's sure to be one to suit your needs and your style.

Additional Fitment Information:
Vehicle Block CC Engine CID
1983 - Ford Mustang V - 6 Cyl 3.8L 232

Ford Performance
  • For Use w/T-5 Transmission
  • Clutch Cable; For Use w/T-5 Transmission;
  • Clutch Cable
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Clutch Cable
  • Available in self-adjusting or manually adjustable kits, these quality clutch linkage upgrade kits feature billet aluminum construction and heavy duty clutch cables. They'll provide you with years of smooth operation, while also providing softer pedal pressure and longer clutch life.

Additional Fitment Information:
Vehicle Block CC Transmission Engine Sub Model CID
1983 - Ford Mustang V - Manual 6 Cyl 3.8L GLX 232

Ford Performance
  • Fits 8.8 in. 10 Bolt; 3.73 Gear Ratio; 8.8 in. Ring Gear Diameter
  • Ring Gear And Pinion Set; 3.73 Ratio; 8.8 in.;
  • Ring Gear And Pinion Set
  • Product Attributes:
    • Axle Type: Ford 8.8 In.
    • Gear Ratio: 3.73
    • WARNING CA Proposition 65: No
  • Features:
    • CNC Cut And Lapped Gear Teeth
    • Higher Strength And Better Quality
    • OEM Quality
    • Race Proven
    • Standard In Performance
    • Made in the USA
  • Ford Racing ring and pinion sets are engineered, manufactured, and tested for maximum performance. These ring and pinion sets are finished in a black oxide coating for corrosion resistance, and are available in many different ratios to fit a variety of Ford differentials. ** Note: 3.15 Ratio Differential not compatible with 3/31, 3.55, 3.73 and 4.09 ratio gears. Use differential M-4204-MT or M-4204-M. * This part is designed and intended for competition use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this art on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

Additional Fitment Information:
Vehicle Block CC Position Engine Engine Version CID
1983 - Ford E-150 Econoline V 5753 Rear 8 Cyl 5.8L Windsor 351

Ford Performance
  • Fits 8.8 in. 10 Bolt; 3.55 Gear Ratio; 8.8 in. Ring Gear Diameter
  • Ring Gear And Pinion Set; 3.55 Ratio; 8.8 in.;
  • Ring Gear And Pinion Set
  • Product Attributes:
    • Axle Type: Ford 8.8 In.
    • Gear Ratio: 3.55
    • WARNING CA Proposition 65: No
  • Features:
    • CNC Cut And Lapped Gear Teeth
    • Higher Strength And Better Quality
    • OEM Quality
    • Race Proven
    • Standard In Performance
    • Made in the USA
  • Ford Racing ring and pinion sets are engineered, manufactured, and tested for maximum performance. These ring and pinion sets are finished in a black oxide coating for corrosion resistance, and are available in many different ratios to fit a variety of Ford differentials.

Additional Fitment Information:
Vehicle Block CC Position Engine Engine Version CID
1983 - Ford E-150 Econoline Club Wagon V 5753 Rear 8 Cyl 5.8L Windsor 351
Showing 1 - 10 of 31 products

Loading...