Image
Product
Price
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1995 - Mitsubishi Eclipse | Naturally Aspirated |
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Mitsubishi Expo |
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1995 - Mitsubishi Expo | Left | AWD |
- When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Mitsubishi Expo |
- Production: -05/31/1994
- When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1995 - Mitsubishi Montero | V | 2972 | 6 Cyl 3.0L | 181 | To:05-31-94 |
- Production: 06/01/1994-
- When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1995 - Mitsubishi Montero | V | 2972 | 6 Cyl 3.0L | 181 | Fr:06-01-94 |
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1995 - Mitsubishi Eclipse | Naturally Aspirated |
- This is also the Timing Belt Idler Pulley, so you will need 2-pcs. if you are replacing both the Idler Pulley and the Tensioner Pulley.
- w/o Bracket Bearing/Roller Only
- Pulley Only
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1995 - Mitsubishi Eclipse | Naturally Aspirated |
- Production: 01/01/1994-, This is also the Timing Belt Tensioner Pulley, so you will need 2-pcs. if you are replacing both the Idler Pulley and the Tensioner Pulley.
- Pulley Only
Additional Fitment Information:
| Vehicle | Aspiration | Prod. Date Range |
|---|---|---|
| 1995 - Mitsubishi Eclipse | Naturally Aspirated | Fr:01-01-94 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Mitsubishi Mirage | L | 1468 | 4 Cyl 1.5L | 90 |
Showing 1 - 10 of 22 products
Loading...