1958 Pontiac Gates Parts


Showing 1 - 10 of 20 products
Image
SKU
Product
Rating
Price

Gates
  • W/O P.S.
  • High Capacity V-Belt (Standard)
  • Product Attributes:
    • Top Width: .41
    • Belt Material: Epdm
    • Notched: Yes
    • Outside Circumference:
      • 1392
      • 54.82
    • Construction: Notched
    • Cross Section Designation: Hc41
    • Effective Length:
      • 1372
      • 54
    • Strand Quantity: 1
    • Type: High Capacity V-belt (standard)
    • Cord Material: Polyester
  • Features:
    • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
    • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
    • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
    • Resists oil, heat, ozone, weather and aging for improved belt life
    • Meets or exceeds SAE J636C specifications
  • Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
00015613545, 0106200, 0136571, 03-02-124-6, 03-02-428-8, 0403545, 0880077530135GA, 10540, 10543, 1058, 1062, 10A1370, 11344, 11502119, 1162716, 1163567, 1163767, 1168772...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1958 - Pontiac Pathfinder V 4638 Fan and Generator GAS 8 Cyl 4.6L 283

Gates
  • W/P.S.
  • High Capacity V-Belt (Standard)
  • Product Attributes:
    • Top Width: .41
    • Belt Material: Epdm
    • Notched: Yes
    • Outside Circumference:
      • 1418
      • 55.82
    • Construction: Notched
    • Cross Section Designation: Hc41
    • Effective Length:
      • 1397
      • 55
    • Strand Quantity: 1
    • Type: High Capacity V-belt (standard)
    • Cord Material: Polyester
  • Features:
    • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
    • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
    • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
    • Resists oil, heat, ozone, weather and aging for improved belt life
    • Meets or exceeds SAE J636C specifications
  • Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
00023791, 0117400, 0221599590, 02235177, 0224779, 0274837, 03-02-097-5, 03-02-551-9, 0403548, 0406944, 10-01957, 10-02013, 10017221, 10548, 10550, 10555, 10A1395, 10AX1400...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1958 - Pontiac Pathfinder V 4638 Fan and Generator GAS 8 Cyl 4.6L 283

Gates
  • W/O A.C.
  • High Capacity V-Belt (Standard)
  • Product Attributes:
    • Top Width: .41
    • Belt Material: Epdm
    • Notched: Yes
    • Outside Circumference:
      • 1468
      • 57.81
    • Construction: Notched
    • Cross Section Designation: Hc41
    • Effective Length:
      • 1448
      • 57
    • Strand Quantity: 1
    • Type: High Capacity V-belt (standard)
    • Cord Material: Polyester
  • Features:
    • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
    • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
    • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
    • Resists oil, heat, ozone, weather and aging for improved belt life
    • Meets or exceeds SAE J636C specifications
  • Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0035591800, 0035591892, 0075221958, 0215411, 03-02-639-6, 0302730, 0320432, 0341848, 0403574, 071058, 10-01940, 10568, 10570, 10A1450, 11340, 11502127, 11502257, 11518...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1958 - Pontiac Super Chief V 6064 Fan and Generator GAS 8 Cyl 6.1L 370

Gates
  • W/A.C.; W/O Air Suspension
  • High Capacity V-Belt (Standard)
  • Product Attributes:
    • Top Width: .47
    • Belt Material: Epdm
    • Notched: Yes
    • Outside Circumference:
      • 1006
      • 39.61
    • Construction: Notched
    • Cross Section Designation: Hc50
    • Effective Length:
      • 38.99
      • 990
    • Strand Quantity: 1
    • Type: High Capacity V-belt (standard)
    • Cord Material: Polyester
  • Features:
    • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
    • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
    • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
    • Resists oil, heat, ozone, weather and aging for improved belt life
    • Meets or exceeds SAE J636C specifications
  • Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
000067015321, 0059976892, 0070077, 0110037, 0116100, 016864, 0197810984, 0200085, 02032188, 027070553, 027100190, 027100190Y, 028410, 031104972, 035260849C, 0401393, 055260849C, 060518381...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1958 - Pontiac Super Chief V 6064 Fan GAS 8 Cyl 6.1L 370

Gates
  • W/A.C.; W/O P.S.
  • High Capacity V-Belt (Standard)
  • Product Attributes:
    • Top Width: .47
    • Belt Material: Epdm
    • Notched: Yes
    • Outside Circumference:
      • 1006
      • 39.61
    • Construction: Notched
    • Cross Section Designation: Hc50
    • Effective Length:
      • 38.99
      • 990
    • Strand Quantity: 1
    • Type: High Capacity V-belt (standard)
    • Cord Material: Polyester
  • Features:
    • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
    • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
    • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
    • Resists oil, heat, ozone, weather and aging for improved belt life
    • Meets or exceeds SAE J636C specifications
  • Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1958 - Pontiac Star Chief V 6064 Fan GAS 8 Cyl 6.1L 370

Gates
  • Cut to fit
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 124
      • 4.9
    • End 1 Inside Diameter:
      • .61
      • 15
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • .61
      • 15
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0491210631, 1, 10042686, 1010, 10120087, 122310, 12604942, 1333180, 1370436, 14-1725-8, 142-0801, 142-5941, 14207S, 1489658, 15115123, 15612108, 15665113, 15727639...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
1958 - Pontiac Strato-Chief V 5704 GAS 8 Cyl 5.7L 348

Gates
  • Cut to fit
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 18
      • 457
    • End 1 Inside Diameter:
      • 1.75
      • 44
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.75
      • 44
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0516434000, 083, 1117227, 1274494, 1326235, 132691, 1330591, 14-1606-2, 1453013, 1461200, 1462573, 1462574, 1465546, 1468737, 1469370, 1471289, 1471552, 1471603...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine Fuel Delivery SubType CID
1958 - Pontiac Super Chief V 6064 Upper GAS 8 Cyl 6.1L 2BBL 370

Gates
  • W/2-Bbl. Carb.; Cut to fit
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 18
      • 457
    • End 1 Inside Diameter:
      • 1.75
      • 44
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.75
      • 44
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1958 - Pontiac Star Chief V - Upper GAS 8 Cyl 6.1L 370

Gates
  • W/4-Bbl. Carb.; Cut to fit
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 18
      • 457
    • End 1 Inside Diameter:
      • 1.75
      • 44
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.75
      • 44
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1958 - Pontiac Star Chief V - Upper GAS 8 Cyl 6.1L 370

Gates
  • W/P.S.
  • High Capacity V-Belt (Standard)
  • Product Attributes:
    • Top Width: .41
    • Belt Material: Epdm
    • Notched: Yes
    • Outside Circumference:
      • 1164
      • 45.82
    • Construction: Notched
    • Cross Section Designation: Hc41
    • Effective Length:
      • 1143
      • 45
    • Strand Quantity: 1
    • Type: High Capacity V-belt (standard)
    • Cord Material: Polyester
  • Features:
    • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
    • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
    • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
    • Resists oil, heat, ozone, weather and aging for improved belt life
    • Meets or exceeds SAE J636C specifications
  • Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
005455, 0106400, 02028380, 0221599890, 0226405, 027017645, 03-02-501-2, 0337303, 0337304, 0400030, 053536, 0545350, 0609230, 09433743, 0TX10276, 10-01817, 1001390, 10019362...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1958 - Pontiac Pathfinder L 4278 Fan and Generator GAS 6 Cyl 4.3L 261
Showing 1 - 10 of 20 products

Loading...