1968 Hedman Parts

Choose a Make for your 1968 vehicle


Showing 1 - 10 of 53 products
Image
SKU
Product
Rating
Price

Hedman
  • Long-Tube Headers For 62-74 MOPAR B & E-Body with 361-440
  • Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: Yes Manual Transmission - Floor: Yes Footnotes: (1) Without smog injection or injection heads. Footnotes: (129) Modification to shift linkage may be required. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.; Does not require EO if existing emission controls are not removed. Engine Family: MOPAR 361-440 B/RB ENGINES Notes: For use with MOPAR B and E Body not listed elsewhere
  • Standard Uncoated Headers; 1-3/4 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Header Port Shape: Square
    • Quantity: Sold As A Pair.
    • with A.I.R. System: No
    • Cylinder Head: Stock Profile Heads
    • Tuned: No
    • Cylinder Head Port Shape: Square
    • Header Style: Long Tube
    • Manual Transmission - Column: Yes
    • Finish: Uncoated
    • Flange Style: Standard
    • Exceptions: Some 440 Applications May Encounter Driver Side Steering Or Starter Interference
    • Collector Bolts Included: Yes
    • Bolts/Studs Included: Yes
    • Automatic Transmission - Floor: Yes
    • with EGR: No
    • Tube Material Thickness: 16g
    • Tube Diameter: 1-3/4 In.
    • Automatic Transmission - Column: Yes
    • Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
    • Reducer Outlet Size: 2-1/2 In.
    • Tube Size: 1-3/4 In.
    • Port Shape: Square
    • Tube Length: Long Tubes
    • Manual Transmission - Floor: Yes
    • Collector Diameter: 3 In.
    • Tube Style: Long Tubes
    • Variations: 78036, 78033, 78038, 73038
    • Collector Size: 3 In.
    • Header Finish: Uncoated
    • Mounting Hardware Included: Yes
    • Weld-Up: No
    • Collector Attachment: 3 In.
    • Header Fasteners Included: Yes
    • Y-Pipe Included: No
    • Contents: Headers, Gaskets (when Applicable), 3-bolt Exhaust Adapters, Hardware
    • Finish Type:
      • Uncoated Mild Steel
      • Uncoated Mild Steel! Shipped With Temporary Paint.
    • Notes: 62-74 B & E-body 361-440
    • Motor Mounts Included: No
    • Primary Tube Diameter (in): 1.75 In.
    • Crossover Pipe Included: No
    • For Use On: Mopar B And E Body Cars Not Referred To By Model With And Other Header Numbers.
    • Header Construction: Mild Steel- Standard-duty
    • Replacement Head Flange Gasket: 27900
    • Tube Design: Standard
    • Material: Mild Steel
    • Power Steering: Yes
    • E.O. #: No
    • Exhaust System Dia: 2-1/2 In.
    • Flange Thickness: 0.3125 In.
    • Engine: Chrysler B/rb; 361-440
    • Air Conditioning: Yes
    • Installation Hardware Included: Yes
    • Reducers Included: Yes
    • Gasket Or Seal Included: Yes
    • Primary Tube Gauge: 16g
    • Header Material: Mild Steel
    • Catalytic Converter(s) Included: No
    • Replacement Gasket: 27900
    • Collector Style: Ball And Socket Style (gasketless)
    • Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
  • Features:
    • Handcrafted, Mild Steel Construction.
    • Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
    • Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!
  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and classic musclecars is their specialty. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Big Block Chrylser's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

    These uncoated, LONG-TUBE headers fit a variety of 1967-1974 MOPAR passenger cars powered by a Chrysler 361-440 B/RB engine. Included in this list of popular models are 1970-74 Dodge Challenger and Plymouth Barracuda, '66-74 Dodge Charger, '68-74 Plymouth Roadrunner and '67-70 Belvedere (check the application listings for exact fitment). These headers fit both manual and automatic transmission models, however, modification to the shift linkage may be required. The smooth 1-3/4 in. tube design provides excellent exhaust flow to let your Chrysler 361-440 (wedge-style) engine breathe deep to produce maximum horsepower and torque.

    These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.

    Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.

    Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Block CC Cylinder Head Type Region Fuel Type Engine Sub Model Aspiration CID
1968 - Plymouth GTX V 7211 OHV United States GAS 8 Cyl 7.2L Base Naturally Aspirated 440

Hedman
  • Long-tube Headers For 64-77 Chevelle with 396-502
  • Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Yes Footnotes: (1) Without smog injection or injection heads. Footnotes: (20) For factory heads. Verify aftermarket head compatibility before purchasing. Footnotes: (49) Will not fit (Saginaw) close ratio P/S with 825 power steering box, 1967-69. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed. Engine Family: BB Chevy 396-502 (MARK IV / GEN V)
  • Standard Uncoated Headers; 1-3/4 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design; Non-Emissions Model
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Header Port Shape: Round
    • Quantity: Sold As A Pair.
    • with A.I.R. System: No
    • Cylinder Head: Stock Profile Heads
    • Tuned: No
    • Cylinder Head Port Shape: Round
    • Header Style: Long Tube
    • Manual Transmission - Column: Yes
    • Finish: Uncoated
    • Flange Style: Standard
    • Collector Bolts Included: Yes
    • Bolts/Studs Included: Yes
    • Automatic Transmission - Floor: Yes
    • with EGR: No
    • Tube Material Thickness: 16g
    • Tube Diameter: 1-3/4 In.
    • Automatic Transmission - Column: Yes
    • Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
    • Reducer Outlet Size: 2-1/2 In.
    • Tube Size: 1-3/4 In.
    • Port Shape: Round
    • Tube Length: Long Tubes
    • Manual Transmission - Floor: Yes
    • Collector Diameter: 3 In.
    • Tube Style: Long Tubes
    • Variations: 68196, 68198
    • Collector Size: 3 In.
    • Header Finish: Uncoated
    • Mounting Hardware Included: Yes
    • Weld-Up: No
    • Collector Attachment: 3 In.
    • Header Fasteners Included: Yes
    • Y-Pipe Included: No
    • Contents: Header(s), New Bolts, Gasket(s) To Head, Reducer(s) And Hardware, Instructions
    • Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
    • Motor Mounts Included: No
    • Primary Tube Diameter (in): 1.75 In.
    • Crossover Pipe Included: No
    • Header Construction: Mild Steel- Standard-duty
    • Replacement Head Flange Gasket: 27530
    • Tube Design: Standard
    • Material: Mild Steel
    • Power Steering: No
    • E.O. #: No
    • Exhaust System Dia: 2-1/2 In.
    • Flange Thickness: 0.3125 In.
    • Air Conditioning: No
    • Installation Hardware Included: Yes
    • Power Steering Notes: No Power Steering On Camaro, Chevy Ii/nova! Check Specific Ymm Info For Details.
    • Reducers Included: Yes
    • Gasket Or Seal Included: Yes
    • Primary Tube Gauge: 16g
    • Header Material: Mild Steel
    • Catalytic Converter(s) Included: No
    • Replacement Gasket: 27530
    • Collector Style: Ball And Socket Style (gasketless)
    • Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
  • Features:
    • Handcrafted, Mild Steel Construction.
    • Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
    • Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!
  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing long and MID-LENGTH tube headers for Chevy passenger cars for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Big Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

    These LONG-TUBE headers fit a variety of BB Chevy (396-454) powered 1967-77 Chevy passenger cars. Model like, 1967-69 Camaros, 64-77 Chevelles and El Caminos, 68-74 Novas, and 1965-70 Belair, Impala and Biscayne models. The smooth 1-3/4 in tube design provides ample exhaust flow to let your 396-454 Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. Also available with ceramic-metallic finish.

    Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed. Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Region Fuel Type Sub Model Aspiration
1968 - Chevrolet El Camino United States GAS Base Naturally Aspirated

Hedman
  • Long-tube Headers For 64-77 Chevelle with 396-502
  • Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: Yes Manual Transmission - Floor: Yes Footnotes: (1) Without smog injection or injection heads. Footnotes: (20) For factory heads. Verify aftermarket head compatibility before purchasing. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed. Engine Family: BB Chevy 396-502 (MARK IV / GEN V)
  • Standard Uncoated Headers; 1-3/4 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design; Non-Emissions Model
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Header Port Shape: Round
    • Quantity: Sold As A Pair.
    • with A.I.R. System: No
    • Cylinder Head: Stock Profile Heads
    • Tuned: No
    • Cylinder Head Port Shape: Round
    • Header Style: Long Tube
    • Manual Transmission - Column: Yes
    • Finish: Uncoated
    • Flange Style: Standard
    • Collector Bolts Included: Yes
    • Bolts/Studs Included: Yes
    • Automatic Transmission - Floor: Yes
    • with EGR: No
    • Tube Material Thickness: 16g
    • Tube Diameter: 1-3/4 In.
    • Automatic Transmission - Column: Yes
    • Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
    • Reducer Outlet Size: 2-1/2 In.
    • Tube Size: 1-3/4 In.
    • Port Shape: Round
    • Tube Length: Long Tubes
    • Manual Transmission - Floor: Yes
    • Collector Diameter: 3 In.
    • Tube Style: Long Tubes
    • Variations: 68196, 68198
    • Collector Size: 3 In.
    • Header Finish: Uncoated
    • Mounting Hardware Included: Yes
    • Weld-Up: No
    • Collector Attachment: 3 In.
    • Header Fasteners Included: Yes
    • Y-Pipe Included: No
    • Contents: Header(s), New Bolts, Gasket(s) To Head, Reducer(s) And Hardware, Instructions
    • Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
    • Motor Mounts Included: No
    • Primary Tube Diameter (in): 1.75 In.
    • Crossover Pipe Included: No
    • Header Construction: Mild Steel- Standard-duty
    • Replacement Head Flange Gasket: 27530
    • Tube Design: Standard
    • Material: Mild Steel
    • Power Steering: No
    • E.O. #: No
    • Exhaust System Dia: 2-1/2 In.
    • Flange Thickness: 0.3125 In.
    • Air Conditioning: No
    • Installation Hardware Included: Yes
    • Power Steering Notes: No Power Steering On Camaro, Chevy Ii/nova! Check Specific Ymm Info For Details.
    • Reducers Included: Yes
    • Gasket Or Seal Included: Yes
    • Primary Tube Gauge: 16g
    • Header Material: Mild Steel
    • Catalytic Converter(s) Included: No
    • Replacement Gasket: 27530
    • Collector Style: Ball And Socket Style (gasketless)
    • Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
  • Features:
    • Handcrafted, Mild Steel Construction.
    • Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
    • Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!
  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing long and MID-LENGTH tube headers for Chevy passenger cars for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Big Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

    These LONG-TUBE headers fit a variety of BB Chevy (396-454) powered 1967-77 Chevy passenger cars. Model like, 1967-69 Camaros, 64-77 Chevelles and El Caminos, 68-74 Novas, and 1965-70 Belair, Impala and Biscayne models. The smooth 1-3/4 in tube design provides ample exhaust flow to let your 396-454 Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. Also available with ceramic-metallic finish.

    Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed. Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Region
1968 - Chevrolet Biscayne United States

Hedman
  • Mid-Length Headers for 67-87 C10 Trucks w/283-400
  • Air Conditioning: Not for '67-69 with A/C! 1970 and later with Large Piston A/C need bracket 20110 Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Footnotes: (1) Without smog injection or injection heads. Footnotes: (121) Must modify rotary A/C bracket. Footnotes: (160) Early Model Chassis. ENGINE CENTERED in vehicle. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed.
  • 67-87 C10/C20 Trucks and SUVs with SB Chevy; Standard Uncoated Hedders; 1-5/8" Tube Dia.; 3" Coll.; MID-LENGTH Design
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Header Port Shape: Oval Port
    • Quantity: Sold As A Pair.
    • with A.I.R. System: No
    • Cylinder Head: Fits Factory Gm Aluminum Angle Plug And Straight Plug Heads.
    • Tuned: No
    • Cylinder Head Port Shape: Oval
    • Header Style: Mid-length Tube
    • Manual Transmission - Column: No
    • Finish: Uncoated
    • Flange Style: Standard
    • Collector Bolts Included: Yes
    • Bolts/Studs Included: Yes
    • Chassis Compatibility: Not For Vehicles With Offset (right) Engine Position!
    • Automatic Transmission - Floor: Yes
    • with EGR: No
    • Tube Material Thickness: 16g
    • Tube Diameter: 1-5/8 In.
    • Automatic Transmission - Column: Yes
    • Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
    • Reducer Outlet Size: 2-1/2 In.
    • Tube Size: 1-5/8 In.
    • Port Shape: Oval
    • Tube Length: Mid-length Tubes
    • Manual Transmission - Floor: Yes
    • Collector Diameter: 3 In.
    • Tube Style: Mid-length
    • Air Conditioning Notes: 70-up: Large Compressor Needs Hedman 20110; Small Compressor, Modify Oe Bracket
    • Materials: Mild Steel 16g Tubes; 5/16 In. Head Flanges; 1/4 In. Collector Flanges
    • Variations: 69016
    • Collector Size: 3 In.
    • Header Finish: Uncoated
    • Mounting Hardware Included: Yes
    • Special Engine Notes: Designed For Use With The Sb Chevy Engine Located In The Factory Position.
    • Weld-Up: No
    • Collector Attachment: 3 In.
    • Header Fasteners Included: Yes
    • Y-Pipe Included: No
    • Contents: Headers, Gaskets (when Applicable), 3-bolt Exhaust Adapters, Hardware
    • Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
    • Motor Mounts Included: No
    • Primary Tube Diameter (in): 1.625 In.
    • Crossover Pipe Included: No
    • Header Construction: Mild Steel- Standard-duty
    • Replacement Head Flange Gasket: 27520
    • Tube Design: Standard
    • Material: Mild Steel
    • Power Steering: Yes
    • E.O. #: No
    • Exhaust System Dia: 2-1/2 In.
    • Flange Thickness: 0.375 In.
    • Air Conditioning: Yes
    • Installation Hardware Included: Yes
    • Reducers Included: Yes
    • Gasket Or Seal Included: Yes
    • Primary Tube Gauge: 16g
    • Header Material: Mild Steel
    • Catalytic Converter(s) Included: No
    • Replacement Gasket: 27520
    • Collector Style: Ball And Socket Style (gasketless)
    • Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
    • Transmission Compatibility: Manual Trans. Must Use Tailshaft Style Crossmember Or Modify Factory Crossmember
  • Features:
    • Handcrafted, Mild Steel Construction.
    • The Mid-Length Tube Header Design Provides Significantly More Low and Mid-range Power than Cast Manifolds, and Provide Better Ground Clearance And Component Compatibility Than Long Tube Headers.
    • Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limited Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!
  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Chevy truck headers for nearly as long. Whether your cherished truck is powered by a Chevy small block, big block, or LS engine, Hedman Hedders manufactures as model for you in its Whittier, California manufactruring facility. This set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

    These uncoated, MID-LENGTH tube headers fit 1967-1987 2WD, 1/2 ton and 3/4 ton Chevy and GMC trucks, Suburbans, and Blazers with a SB Chevy engine (check the application listings for exact fitment). The smooth 1-5/8 in tube design provides ample exhaust flow to let your C10/C20, C15/C25 truck's 283-400 SB Chevy engine breathe easy, and produce maximum horsepower and torque. The MID-LENGTH design of these headers keeps the header connection up, tighter to the body, so you can keep your entire exhaust above the frame rails. These headers work with factory chassis, as well as, aftermarket front clips, like Porterbuilt.

    These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.

    Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.

    Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Block CC Region Engine CID
1968 - Chevrolet C20 Pickup V 5358 United States 8 Cyl 5.3L 327

Hedman
  • Mid-Length Headers For 67-81 Camaro, Nova, G-Body with 283-400
  • Air Conditioning: No Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: No Footnotes: Will not fit (Saginaw) close ratio P/S with 825 power steering box. Footnotes: (1) Without smog injection or injection heads. Footnotes: (103) Will fit with angle plug heads (Chevy aluminum only, L98). Footnotes: (121) Must modify rotary A/C bracket. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed. Engine Family: SB Chevy 283-400 (Gen 1)
  • Standard-Duty Headers For Various Camaro, Chevelle, El Camino, Nova, Regal, Cutlass, Grand Prix & Others; SB Chevy 283-400; 1-5/8 in. Mid-Length Tubes, 3 in. Collector; Non-E.O. ; Uncoated Mild-Steel
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Header Port Shape: Round
    • Quantity: Sold As A Pair.
    • with A.I.R. System: No
    • Cylinder Head: Stock Profile Heads
    • Tuned: No
    • Cylinder Head Port Shape: Round
    • Header Style: Mid-length Tube
    • Manual Transmission - Column: No
    • Finish: Uncoated
    • Flange Style: Standard
    • Collector Bolts Included: Yes
    • Bolts/Studs Included: Yes
    • Automatic Transmission - Floor: Yes
    • with EGR: No
    • Tube Material Thickness: 16g
    • Tube Diameter: 1-5/8 In.
    • Automatic Transmission - Column: Yes
    • Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
    • Reducer Outlet Size: 2-1/2 In.
    • Tube Size: 1-5/8 In.
    • Port Shape: Round
    • Tube Length: Mid-length Tubes
    • Manual Transmission - Floor: No
    • Collector Diameter: 3 In.
    • Tube Style: Mid-length
    • Variations: 68606, 68603, 68608 & 63608. 62600, 62606 & 62603 304 Stainless Steel.
    • Collector Size: 3 In.
    • Header Finish: Uncoated
    • IMPORTANT!: Automatic Transmission Only!
    • Mounting Hardware Included: Yes
    • Weld-Up: No
    • Collector Attachment: 3 In.
    • Header Fasteners Included: Yes
    • Y-Pipe Included: No
    • Contents: Headers, Gaskets (when Applicable), 3-bolt Exhaust Adapters, Hardware
    • Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
    • Notes: 67-81 F; 64-83 A, 82-88 G; 68-79 X; 71-94 B; 84-04 Astro 283-400
    • Motor Mounts Included: No
    • Primary Tube Diameter (in): 1.625 In.
    • Crossover Pipe Included: No
    • Header Construction: Mild Steel- Standard-duty
    • Replacement Head Flange Gasket: 27500
    • Tube Design: Standard
    • Material: Mild Steel
    • Power Steering: Yes
    • E.O. #: No
    • Exhaust System Dia: 2-1/2 In.
    • Flange Thickness: 0.3125 In.
    • Engine: Chevy Sb 283-400 (gen 1) 1958-86
    • LS SWAP: No
    • Installation Hardware Included: Yes
    • Reducers Included: Yes
    • Gasket Or Seal Included: Yes
    • Primary Tube Gauge: 16g
    • Header Material: Mild Steel
    • Catalytic Converter(s) Included: No
    • Replacement Gasket: 27500
    • Collector Style: Ball And Socket Style (gasketless)
    • Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
  • Features:
    • Handcrafted, Mild Steel Construction.
    • The Mid-Length Tube Header Design Provides Significantly More Low and Mid-range Power than Cast Manifolds, and Provide Better Ground Clearance And Component Compatibility Than Long Tube Headers.
    • Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!
  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing long and MID-LENGTH tube headers for Chevy passenger cars for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

    These uncoated, MID-LENGTH tube headers are one of the most versatile headers Hedman Hedders manufacturers. While we've seen them on rare builds, like a SB Chevy equipped Studebaker, these MID-LENGTH headers are actually cataloged to fit Small Block Chevy V8 powered, 1967-81 Chevy Camaros; 1964-1987 GM A-Body and G-Body vehicles (Buick Regal, Chevy Chevelle, El Camino, Monte Carlo, Olds Cutlass, Pontiac Grand Prix); '68-79 Chevy II and Nova. Heck, they even fit 1984-2004 Chevy AstroVans. The smooth 1-5/8 in tube design provides ample exhaust flow to let your 283-400 SB Chevy engine breathe easy, and improve horsepower and torque over stock manifolds.

    These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.

    Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.

    Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Region Fuel Type
1968 - Oldsmobile Vista Cruiser United States GAS

Hedman
  • Long-Tube Headers For 67-91 GM 283-400 Trucks & SUVs
  • Air Conditioning: Not for '67-69 with A/C! 1970 and later with Large Piston A/C need bracket 20110 Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Some vehicles may encounter clutch shaft interference when cross shaft location is under or behind the driver side rear exhaust port. Use 69092 without A.I.R. Use 69093 with A.I.R. Order Elite 69892. Footnotes: (1) Without smog injection or injection heads. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed.
  • Standard-Duty Uncoated, Long-Tube Headers For 1967-87 CHEVY/GMC 2WD & 4WD, 1/2 to 1 Ton Pick-Up, SUV or Motorhome with 283-400 SB Chevy Engine (Centered Engine Chassis Only); 1-5/8 in. Long Tubes; 3 in. Ball/Socket Collector
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Header Port Shape: Round
    • Quantity: Sold As A Pair.
    • with A.I.R. System: No
    • Cylinder Head: Fits Factory Gm Aluminum Angle Plug And Straight Plug Heads.
    • Tuned: No
    • Cylinder Head Port Shape: Round
    • Header Style: Long Tube
    • Manual Transmission - Column: No
    • Finish: Uncoated
    • Flange Style: Standard
    • Collector Bolts Included: Yes
    • Bolts/Studs Included: Yes
    • Chassis Compatibility: Not For Vehicles With Offset (right) Engine Position!
    • Automatic Transmission - Floor: Yes
    • with EGR: No
    • Tube Material Thickness: 16g
    • Tube Diameter: 1-5/8 In.
    • Automatic Transmission - Column: Yes
    • Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
    • Reducer Outlet Size: 2-1/2 In.
    • Tube Size: 1-5/8 In.
    • Port Shape: Round
    • Tube Length: Long Tubes
    • Manual Transmission - Floor: No
    • Collector Diameter: 3 In.
    • Tube Style: Long Tubes
    • Variations: 69096, 69890
    • Collector Size: 3 In.
    • Header Finish: Uncoated
    • Mounting Hardware Included: Yes
    • Weld-Up: No
    • Collector Attachment: 3 In.
    • Header Fasteners Included: Yes
    • Y-Pipe Included: No
    • Contents: Headers, Gaskets (when Applicable), 3-bolt Exhaust Adapters, Hardware
    • Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
    • Notes: 67-91 Gm. Full Size Blazer, Jimmy 283-400 2-4wd
    • Motor Mounts Included: No
    • Primary Tube Diameter (in): 1.625 In.
    • Crossover Pipe Included: No
    • Header Construction: Mild Steel- Standard-duty
    • Replacement Head Flange Gasket: 27500
    • Tube Design: Standard
    • Material: Mild Steel
    • Power Steering: Yes
    • E.O. #: No
    • Exhaust System Dia: 2-1/2 In.
    • Flange Thickness: 0.3125 In.
    • Air Conditioning: Yes
    • Installation Hardware Included: Yes
    • Reducers Included: Yes
    • Gasket Or Seal Included: Yes
    • Primary Tube Gauge: 16g
    • Header Material: Mild Steel
    • Catalytic Converter(s) Included: No
    • Replacement Gasket: 27500
    • Collector Style: Ball And Socket Style (gasketless)
    • Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
    • Transmission Compatibility: May Encounter Clutch Interference If Cross Shaft Behind Driver Side Rear Port
  • Features:
    • Handcrafted, Mild Steel Construction.
    • Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
    • Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!
  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing LONG and MID-LENGTH tube headers for Chevy trucks for nearly as long. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

    These uncoated, LONG-TUBE headers are one of Hedman's best selling Chevy truck headers. They fit a wide range of early to mid-year 1967-1987 2WD & 4WD Chevy/GMC 1/2 Ton and 3/4 ton trucks, Blazers and Suburbans (check the application listings for exact fitment), powered by a Small Block Chevy engine (without A.I.R. System). The smooth 1-5/8 in. tube design provides ample exhaust flow to let your truck's 283-400 SB Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower under hood temperatures, these headers are also available with a silver or black ceramic-metallic finish.

    Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.

    Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Block CC Region Engine CID
1968 - GMC C25/C2500 Suburban V 5358 United States 8 Cyl 5.3L 327

Hedman
  • Long-Tube Headers For 67-91 GM 283-400 Trucks & SUVs
  • Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Some vehicles may encounter clutch shaft interference when cross shaft location is under or behind the driver side rear exhaust port. Use 69092 without A.I.R. Use 69093 with A.I.R. Order Elite 69892. Footnotes: (1) Without smog injection or injection heads. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed.
  • Standard-Duty Uncoated, Long-Tube Headers For 1967-87 CHEVY/GMC 2WD & 4WD, 1/2 to 1 Ton Pick-Up, SUV or Motorhome with 283-400 SB Chevy Engine (Centered Engine Chassis Only); 1-5/8 in. Long Tubes; 3 in. Ball/Socket Collector
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Header Port Shape: Round
    • Quantity: Sold As A Pair.
    • with A.I.R. System: No
    • Cylinder Head: Fits Factory Gm Aluminum Angle Plug And Straight Plug Heads.
    • Tuned: No
    • Cylinder Head Port Shape: Round
    • Header Style: Long Tube
    • Manual Transmission - Column: No
    • Finish: Uncoated
    • Flange Style: Standard
    • Collector Bolts Included: Yes
    • Bolts/Studs Included: Yes
    • Chassis Compatibility: Not For Vehicles With Offset (right) Engine Position!
    • Automatic Transmission - Floor: Yes
    • with EGR: No
    • Tube Material Thickness: 16g
    • Tube Diameter: 1-5/8 In.
    • Automatic Transmission - Column: Yes
    • Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
    • Reducer Outlet Size: 2-1/2 In.
    • Tube Size: 1-5/8 In.
    • Port Shape: Round
    • Tube Length: Long Tubes
    • Manual Transmission - Floor: No
    • Collector Diameter: 3 In.
    • Tube Style: Long Tubes
    • Variations: 69096, 69890
    • Collector Size: 3 In.
    • Header Finish: Uncoated
    • Mounting Hardware Included: Yes
    • Weld-Up: No
    • Collector Attachment: 3 In.
    • Header Fasteners Included: Yes
    • Y-Pipe Included: No
    • Contents: Headers, Gaskets (when Applicable), 3-bolt Exhaust Adapters, Hardware
    • Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
    • Notes: 67-91 Gm. Full Size Blazer, Jimmy 283-400 2-4wd
    • Motor Mounts Included: No
    • Primary Tube Diameter (in): 1.625 In.
    • Crossover Pipe Included: No
    • Header Construction: Mild Steel- Standard-duty
    • Replacement Head Flange Gasket: 27500
    • Tube Design: Standard
    • Material: Mild Steel
    • Power Steering: Yes
    • E.O. #: No
    • Exhaust System Dia: 2-1/2 In.
    • Flange Thickness: 0.3125 In.
    • Air Conditioning: Yes
    • Installation Hardware Included: Yes
    • Reducers Included: Yes
    • Gasket Or Seal Included: Yes
    • Primary Tube Gauge: 16g
    • Header Material: Mild Steel
    • Catalytic Converter(s) Included: No
    • Replacement Gasket: 27500
    • Collector Style: Ball And Socket Style (gasketless)
    • Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
    • Transmission Compatibility: May Encounter Clutch Interference If Cross Shaft Behind Driver Side Rear Port
  • Features:
    • Handcrafted, Mild Steel Construction.
    • Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
    • Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!
  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing LONG and MID-LENGTH tube headers for Chevy trucks for nearly as long. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

    These uncoated, LONG-TUBE headers are one of Hedman's best selling Chevy truck headers. They fit a wide range of early to mid-year 1967-1987 2WD & 4WD Chevy/GMC 1/2 Ton and 3/4 ton trucks, Blazers and Suburbans (check the application listings for exact fitment), powered by a Small Block Chevy engine (without A.I.R. System). The smooth 1-5/8 in. tube design provides ample exhaust flow to let your truck's 283-400 SB Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower under hood temperatures, these headers are also available with a silver or black ceramic-metallic finish.

    Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.

    Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Block CC Region Engine CID
1968 - Chevrolet K20 Pickup V 5358 United States 8 Cyl 5.3L 327

Hedman
  • Long-Tube Headers For 62-74 MOPAR B & E-Body with 361-440
  • Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: Yes Manual Transmission - Floor: Yes Footnotes: (1) Without smog injection or injection heads. Footnotes: (129) Modification to shift linkage may be required. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed. Engine Family: MOPAR 361-440 B/RB ENGINES Notes: For use with MOPAR B and E Body not listed elsewhere
  • Standard Uncoated Headers; 1-3/4 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Header Port Shape: Square
    • Quantity: Sold As A Pair.
    • with A.I.R. System: No
    • Cylinder Head: Stock Profile Heads
    • Tuned: No
    • Cylinder Head Port Shape: Square
    • Header Style: Long Tube
    • Manual Transmission - Column: Yes
    • Finish: Uncoated
    • Flange Style: Standard
    • Exceptions: Some 440 Applications May Encounter Driver Side Steering Or Starter Interference
    • Collector Bolts Included: Yes
    • Bolts/Studs Included: Yes
    • Automatic Transmission - Floor: Yes
    • with EGR: No
    • Tube Material Thickness: 16g
    • Tube Diameter: 1-3/4 In.
    • Automatic Transmission - Column: Yes
    • Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
    • Reducer Outlet Size: 2-1/2 In.
    • Tube Size: 1-3/4 In.
    • Port Shape: Square
    • Tube Length: Long Tubes
    • Manual Transmission - Floor: Yes
    • Collector Diameter: 3 In.
    • Tube Style: Long Tubes
    • Variations: 78036, 78033, 78038, 73038
    • Collector Size: 3 In.
    • Header Finish: Uncoated
    • Mounting Hardware Included: Yes
    • Weld-Up: No
    • Collector Attachment: 3 In.
    • Header Fasteners Included: Yes
    • Y-Pipe Included: No
    • Contents: Headers, Gaskets (when Applicable), 3-bolt Exhaust Adapters, Hardware
    • Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
    • Notes: 62-74 B & E-body 361-440
    • Motor Mounts Included: No
    • Primary Tube Diameter (in): 1.75 In.
    • Crossover Pipe Included: No
    • For Use On: Mopar B And E Body Cars Not Referred To By Model With And Other Header Numbers.
    • Header Construction: Mild Steel- Standard-duty
    • Replacement Head Flange Gasket: 27900
    • Tube Design: Standard
    • Material: Mild Steel
    • Power Steering: Yes
    • E.O. #: No
    • Exhaust System Dia: 2-1/2 In.
    • Flange Thickness: 0.3125 In.
    • Engine: Chrysler B/rb; 361-440
    • Air Conditioning: Yes
    • Installation Hardware Included: Yes
    • Reducers Included: Yes
    • Gasket Or Seal Included: Yes
    • Primary Tube Gauge: 16g
    • Header Material: Mild Steel
    • Catalytic Converter(s) Included: No
    • Replacement Gasket: 27900
    • Collector Style: Ball And Socket Style (gasketless)
    • Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
  • Features:
    • Handcrafted, Mild Steel Construction.
    • Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
    • Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!
  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and classic musclecars is their specialty. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Big Block Chrylser's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

    These uncoated, LONG-TUBE headers fit a variety of 1967-1974 MOPAR passenger cars powered by a Chrysler 361-440 B/RB engine. Included in this list of popular models are 1970-74 Dodge Challenger and Plymouth Barracuda, '66-74 Dodge Charger, '68-74 Plymouth Roadrunner and '67-70 Belvedere (check the application listings for exact fitment). These headers fit both manual and automatic transmission models, however, modification to the shift linkage may be required. The smooth 1-3/4 in. tube design provides excellent exhaust flow to let your Chrysler 361-440 (wedge-style) engine breathe deep to produce maximum horsepower and torque.

    These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.

    Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.

    Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Block CC Cylinder Head Type Region Fuel Type Engine Sub Model Aspiration CID
1968 - Dodge Coronet V 7211 OHV United States GAS 8 Cyl 7.2L Deluxe Naturally Aspirated 440

Hedman
  • Long-tube Headers For 64-77 Chevelle with 396-502
  • Air Conditioning: Yes Power Steering: No Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Yes Footnotes: (1) Without smog injection or injection heads. Footnotes: (20) For factory heads. Verify aftermarket head compatibility before purchasing. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed. Engine Family: BB Chevy 396-502 (MARK IV / GEN V)
  • Standard Uncoated Headers; 1-3/4 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design; Non-Emissions Model
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Header Port Shape: Round
    • Quantity: Sold As A Pair.
    • with A.I.R. System: No
    • Cylinder Head: Stock Profile Heads
    • Tuned: No
    • Cylinder Head Port Shape: Round
    • Header Style: Long Tube
    • Manual Transmission - Column: Yes
    • Finish: Uncoated
    • Flange Style: Standard
    • Collector Bolts Included: Yes
    • Bolts/Studs Included: Yes
    • Automatic Transmission - Floor: Yes
    • with EGR: No
    • Tube Material Thickness: 16g
    • Tube Diameter: 1-3/4 In.
    • Automatic Transmission - Column: Yes
    • Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
    • Reducer Outlet Size: 2-1/2 In.
    • Tube Size: 1-3/4 In.
    • Port Shape: Round
    • Tube Length: Long Tubes
    • Manual Transmission - Floor: Yes
    • Collector Diameter: 3 In.
    • Tube Style: Long Tubes
    • Variations: 68196, 68198
    • Collector Size: 3 In.
    • Header Finish: Uncoated
    • Mounting Hardware Included: Yes
    • Weld-Up: No
    • Collector Attachment: 3 In.
    • Header Fasteners Included: Yes
    • Y-Pipe Included: No
    • Contents: Header(s), New Bolts, Gasket(s) To Head, Reducer(s) And Hardware, Instructions
    • Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
    • Motor Mounts Included: No
    • Primary Tube Diameter (in): 1.75 In.
    • Crossover Pipe Included: No
    • Header Construction: Mild Steel- Standard-duty
    • Replacement Head Flange Gasket: 27530
    • Tube Design: Standard
    • Material: Mild Steel
    • Power Steering: No
    • E.O. #: No
    • Exhaust System Dia: 2-1/2 In.
    • Flange Thickness: 0.3125 In.
    • Air Conditioning: No
    • Installation Hardware Included: Yes
    • Power Steering Notes: No Power Steering On Camaro, Chevy Ii/nova! Check Specific Ymm Info For Details.
    • Reducers Included: Yes
    • Gasket Or Seal Included: Yes
    • Primary Tube Gauge: 16g
    • Header Material: Mild Steel
    • Catalytic Converter(s) Included: No
    • Replacement Gasket: 27530
    • Collector Style: Ball And Socket Style (gasketless)
    • Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
  • Features:
    • Handcrafted, Mild Steel Construction.
    • Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
    • Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!
  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing long and MID-LENGTH tube headers for Chevy passenger cars for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Big Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

    These LONG-TUBE headers fit a variety of BB Chevy (396-454) powered 1967-77 Chevy passenger cars. Model like, 1967-69 Camaros, 64-77 Chevelles and El Caminos, 68-74 Novas, and 1965-70 Belair, Impala and Biscayne models. The smooth 1-3/4 in tube design provides ample exhaust flow to let your 396-454 Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. Also available with ceramic-metallic finish.

    Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed. Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Region Fuel Type Sub Model Aspiration
1968 - Chevrolet Chevy II United States GAS Nova Naturally Aspirated

Hedman
  • Long-Tube Headers For 67-81 Camaro, 68-79 Nova with 283-400
  • Air Conditioning: Not for '67-69 with A/C! 1970 and later with Large Piston A/C need bracket 20110 Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Yes Footnotes: (1) Without smog injection or injection heads. Footnotes: (104) On some models it may be necessary to remove Z bars. (SS Series) Footnotes: (121) Must modify rotary A/C bracket. Footnotes: (49) Will not fit (Saginaw) close ratio P/S with 825 power steering box, 1967-69. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed. Engine Family: SB Chevy 283-400 (Gen 1)
  • Standard Uncoated Headers; 1-5/8 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Header Port Shape: Round
    • Quantity: Sold As A Pair.
    • with A.I.R. System: No
    • Cylinder Head: Stock Profile Heads
    • Tuned: No
    • Cylinder Head Port Shape: Round
    • Header Style: Long Tube
    • Manual Transmission - Column: No
    • Finish: Uncoated
    • Flange Style: Standard
    • Collector Bolts Included: Yes
    • Bolts/Studs Included: Yes
    • Automatic Transmission - Floor: Yes
    • with EGR: No
    • Tube Material Thickness: 16g
    • Tube Diameter: 1-5/8 In.
    • Automatic Transmission - Column: Yes
    • Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
    • Reducer Outlet Size: 2-1/2 In.
    • Tube Size: 1-5/8 In.
    • Port Shape: Round
    • Tube Length: Long Tubes
    • Manual Transmission - Floor: Yes
    • Collector Diameter: 3 In.
    • Tube Style: Long Tubes
    • Air Conditioning Notes: No Ac Equipped Gen 1 Camaro Or Gen 2 Nova; 70-up With A/c Require Bracket 20110.
    • Variations: 68276, 68278
    • Collector Size: 3 In.
    • Header Finish: Uncoated
    • Mounting Hardware Included: Yes
    • Weld-Up: No
    • Collector Attachment: 3 In.
    • Header Fasteners Included: Yes
    • Y-Pipe Included: No
    • Contents: Header(s), New Bolts, Gasket(s) To Head, Reducer(s) And Hardware, Instructions
    • Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
    • Notes: 67-68 Camaro, 68-79 Nova 283-400
    • Motor Mounts Included: No
    • Primary Tube Diameter (in): 1.625 In.
    • Crossover Pipe Included: No
    • Header Construction: Mild Steel- Standard-duty
    • Replacement Head Flange Gasket: 27500
    • Tube Design: Standard
    • Material: Mild Steel
    • Power Steering: Yes
    • E.O. #: No
    • Exhaust System Dia: 2-1/2 In.
    • Flange Thickness: 0.3125 In.
    • Air Conditioning: Yes
    • Installation Hardware Included: Yes
    • Reducers Included: Yes
    • Gasket Or Seal Included: Yes
    • Primary Tube Gauge: 16g
    • Header Material: Mild Steel
    • Catalytic Converter(s) Included: No
    • Replacement Gasket: 27500
    • Collector Style: Ball And Socket Style (gasketless)
    • Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
  • Features:
    • Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
    • Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!
    • Handcrafted, Mild Steel Construction.
  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing long and MID-LENGTH tube headers for Chevy passenger cars for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

    These LONG-TUBE headers fit 1967-1981 Chevy Camaros, and 1968-1979 Chevy II and Nova models fitted with a SB Chevy (Gen 1) engine. The smooth 1-5/8 in tube design provides ample exhaust flow to let your 283-400 SB Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.

    Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed. Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Block CC Region Fuel Type Engine Sub Model Aspiration CID
1968 - Chevrolet Camaro V 5358 United States GAS 8 Cyl 5.3L Base Naturally Aspirated 327
Showing 1 - 10 of 53 products

Loading...