- Mid-Length Headers For '64-73 Mustang/Cougar & Others with 260-302
- Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: No Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: No Footnotes: (1) Without smog injection or injection heads. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.: Legal for use on '74-earlier vehicles without A.I.R.. Considered OEM replacement part, and do not require EO, when existing emission controls are not removed. Engine Family: SB FORD 260-302 (Windsor) Y-Pipe Included:No with EGR:No with A.I.R. System:No Package Contents:Set of Headers, mounting hardware and gaskets Installation Hardware Included:Yes Replacement Gasket:27340 Cylinder Head:Stock Profile Heads Quantity:Sold as a pair. Motor Mounts Included:No Crossover Pipe Included:No Catalytic Converter(s) Included:No Collector Bolts Included:Yes Catalog Code:HED Weld-Up:No Tuned:No Primary Tube Gauge:16g Primary Tube Diameter (in):1.50 in. Mounting Hardware Included:Yes Header Material:Mild Steel Header Finish:Uncoated Cylinder Head Port Shape:Square Variations:88406, 88408 Tube Style:Shorty Tube Size:1-1/2 in. Tube Material Thickness:16g Tube Length:Short Tubes Tube Diameter:1-1/2 in. Reducer Outlet Size:2-1/2 in. Power Steering:Yes Port Shape:Square Material:Mild Steel Manual Transmission - Floor:No Manual Transmission - Column:No Header Port Shape:Square Replacement Head Flange Gasket:27340 Flange Style:Standard Finish Type:Uncoated Mild steel Finish:Uncoated Exhaust System Dia:2-1/2 in. Engine Notes:260-302W Collector Style:Ball and Socket Style (Gasketless) Collector Size:2-1/2 in. Automatic Transmission - Floor:Yes Automatic Transmission - Column:No Air Conditioning:Yes Reducers Included:Yes Header Style:Mid-Length Tube Gasket Or Seal Included:Yes Collector Attachment:2-1/2 in. Flange Thickness:0.3125 in. Bolts/Studs Included:Yes Engine Version:Ford Windsor Block (W) Header Construction:Standard-Duty E.O. #:No California Proposition 65:WARNING: Cancer. For more info visit www.P65Warnings.ca.gov Title:HEDMAN HEDDERS STANDARD UNCOATED HEADERS; 1-1/2 IN. TUBE DIA.; 2-1/2 IN. COLL.; SHORTY DESIGN Tube Design:SHORT TUBES Collector Diameter:2-1/2 in. Emissions Notes:NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only. Notes :66-73 Ford Mustang 260-302W Contents:Header(s), new bolts, gasket(s) to head, reducer(s) and hardware, instructions Engine:Ford SB 260-289-302W
- Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 2-1/2 in. Coll.; SHORTY Design
- Product Attributes:
- Header Port Shape: Square
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Square
- Header Style: Mid-length Tube
- Manual Transmission - Column: No
- Finish: Uncoated
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-1/2 In.
- Automatic Transmission - Column: No
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-1/2 In.
- Port Shape: Square
- Tube Length: Short Tubes
- Manual Transmission - Floor: No
- Collector Diameter: 2-1/2 In.
- Tube Style: Shorty
- Engine Version: Ford Windsor Block (w)
- Variations: 88406, 88408
- Collector Size: 2-1/2 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 2-1/2 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Finish Type:
- Uncoated Mild Steel
- Uncoated Mild Steel! Shipped With Temporary Paint.
- Notes: 66-73 Ford Mustang 260-302w
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.50 In.
- Crossover Pipe Included: No
- Header Construction:
- Mild Steel- Standard-duty
- Standard-duty
- Replacement Head Flange Gasket: 27340
- Tube Design:
- Short Tubes
- Standard
- Material: Mild Steel
- Power Steering: Yes
- E.O. #: No
- Engine Notes: 260-302w
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Engine: Ford Sb 260-289-302w
- Air Conditioning: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27340
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Handcrafted, Mild Steel Construction.
- The Short Tube Header Design Provides Good Low-End Power, and Provides Excellent Ground Clearance And Component Compatibility.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Ford Mustang headers for nearly as long as Mustangs have been on the road. Each set uses mild or stainless steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your SB Ford's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated mild steel, MID-LENGTH TUBE headers fit the most iconic passenger cars to come out of Ford and Mercury between 1964-1977, with a 260-302W. Among this prestigious list is 1964-73 Ford Mustang and Falcon, '66-73 Ranchero & Torino, '69-77 Maverick, '66-70 Fairlane, '67-73 Mercury Cougar and'70-73 Comet models fitted with a 260-302W engine. These headers fit automatic transmission equipped vehicles only. The long, smooth 1-1/2 in., rectangle port tube design provides superior exhaust flow over factory manifolds to let your Ford Windsor block engine breathe better, and produce more low-end torque and horsepower.
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish, as well as 100% stainless steel construction.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1969 - Ford Fairlane | V | - | United States | GAS | 8 Cyl 5.0L | 500 | Naturally Aspirated | 302 |
- Mid-Length Headers For '64-73 Mustang/Cougar & Others with 260-302
- Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: No Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: No Footnotes: (1) Without smog injection or injection heads. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.: Legal for use on '74-earlier vehicles without A.I.R.. Considered OEM replacement part, and do not require EO, when existing emission controls are not removed. Y-Pipe Included:No with EGR:No with A.I.R. System:No Package Contents:Set of Headers, mounting hardware and gaskets Installation Hardware Included:Yes Replacement Gasket:27340 Cylinder Head:Stock Profile Heads Quantity:Sold as a pair. Motor Mounts Included:No Crossover Pipe Included:No Catalytic Converter(s) Included:No Collector Bolts Included:Yes Catalog Code:HED Weld-Up:No Tuned:No Primary Tube Gauge:16g Primary Tube Diameter (in):1.50 in. Mounting Hardware Included:Yes Header Material:Mild Steel Header Finish:Uncoated Cylinder Head Port Shape:Square Variations:88406, 88408 Tube Style:Shorty Tube Size:1-1/2 in. Tube Material Thickness:16g Tube Length:Short Tubes Tube Diameter:1-1/2 in. Reducer Outlet Size:2-1/2 in. Power Steering:Yes Port Shape:Square Material:Mild Steel Manual Transmission - Floor:No Manual Transmission - Column:No Header Port Shape:Square Replacement Head Flange Gasket:27340 Flange Style:Standard Finish Type:Uncoated Mild steel Finish:Uncoated Exhaust System Dia:2-1/2 in. Engine Notes:260-302W Collector Style:Ball and Socket Style (Gasketless) Collector Size:2-1/2 in. Automatic Transmission - Floor:Yes Automatic Transmission - Column:No Air Conditioning:Yes Reducers Included:Yes Header Style:Mid-Length Tube Gasket Or Seal Included:Yes Collector Attachment:2-1/2 in. Flange Thickness:0.3125 in. Bolts/Studs Included:Yes Engine Version:Ford Windsor Block (W) Header Construction:Standard-Duty E.O. #:No California Proposition 65:WARNING: Cancer. For more info visit www.P65Warnings.ca.gov Title:HEDMAN HEDDERS STANDARD UNCOATED HEADERS; 1-1/2 IN. TUBE DIA.; 2-1/2 IN. COLL.; SHORTY DESIGN Tube Design:SHORT TUBES Collector Diameter:2-1/2 in. Emissions Notes:NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only. Notes :66-73 Ford Mustang 260-302W Contents:Header(s), new bolts, gasket(s) to head, reducer(s) and hardware, instructions Engine:Ford SB 260-289-302W
- Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 2-1/2 in. Coll.; SHORTY Design
- Product Attributes:
- Header Port Shape: Square
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Square
- Header Style: Mid-length Tube
- Manual Transmission - Column: No
- Finish: Uncoated
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-1/2 In.
- Automatic Transmission - Column: No
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-1/2 In.
- Port Shape: Square
- Tube Length: Short Tubes
- Manual Transmission - Floor: No
- Collector Diameter: 2-1/2 In.
- Tube Style: Shorty
- Engine Version: Ford Windsor Block (w)
- Variations: 88406, 88408
- Collector Size: 2-1/2 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 2-1/2 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Finish Type:
- Uncoated Mild Steel
- Uncoated Mild Steel! Shipped With Temporary Paint.
- Notes: 66-73 Ford Mustang 260-302w
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.50 In.
- Crossover Pipe Included: No
- Header Construction:
- Mild Steel- Standard-duty
- Standard-duty
- Replacement Head Flange Gasket: 27340
- Tube Design:
- Short Tubes
- Standard
- Material: Mild Steel
- Power Steering: Yes
- E.O. #: No
- Engine Notes: 260-302w
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Engine: Ford Sb 260-289-302w
- Air Conditioning: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27340
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Handcrafted, Mild Steel Construction.
- The Short Tube Header Design Provides Good Low-End Power, and Provides Excellent Ground Clearance And Component Compatibility.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Ford Mustang headers for nearly as long as Mustangs have been on the road. Each set uses mild or stainless steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your SB Ford's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated mild steel, MID-LENGTH TUBE headers fit the most iconic passenger cars to come out of Ford and Mercury between 1964-1977, with a 260-302W. Among this prestigious list is 1964-73 Ford Mustang and Falcon, '66-73 Ranchero & Torino, '69-77 Maverick, '66-70 Fairlane, '67-73 Mercury Cougar and'70-73 Comet models fitted with a 260-302W engine. These headers fit automatic transmission equipped vehicles only. The long, smooth 1-1/2 in., rectangle port tube design provides superior exhaust flow over factory manifolds to let your Ford Windsor block engine breathe better, and produce more low-end torque and horsepower.
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish, as well as 100% stainless steel construction.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1969 - Mercury Comet | V | - | United States | GAS | 8 Cyl 5.0L | Base | Naturally Aspirated | 302 |
- Mid-Length Headers For '64-73 Mustang/Cougar & Others with 260-302
- Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: No Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: No Footnotes: (1) Without smog injection or injection heads. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.; Does not require EO if existing emission controls are not removed. Engine Family: SB FORD 260-302 (Windsor)
- Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 2-1/2 in. Coll.; SHORTY Design
- Product Attributes:
- Header Port Shape: Square
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Square
- Header Style: Mid-length Tube
- Manual Transmission - Column: No
- Finish: Uncoated
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-1/2 In.
- Automatic Transmission - Column: No
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-1/2 In.
- Port Shape: Square
- Tube Length: Short Tubes
- Manual Transmission - Floor: No
- Collector Diameter: 2-1/2 In.
- Tube Style: Shorty
- Engine Version: Ford Windsor Block (w)
- Variations: 88406, 88408
- Collector Size: 2-1/2 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 2-1/2 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Finish Type:
- Uncoated Mild Steel
- Uncoated Mild Steel! Shipped With Temporary Paint.
- Notes: 66-73 Ford Mustang 260-302w
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.50 In.
- Crossover Pipe Included: No
- Header Construction: Mild Steel- Standard-duty
- Replacement Head Flange Gasket: 27340
- Tube Design: Standard
- Material: Mild Steel
- Power Steering: Yes
- E.O. #: No
- Engine Notes: 260-302w
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Engine: Ford Sb 260-289-302w
- Air Conditioning: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27340
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Handcrafted, Mild Steel Construction.
- The Short Tube Header Design Provides Good Low-End Power, and Provides Excellent Ground Clearance And Component Compatibility.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Ford Mustang headers for nearly as long as Mustangs have been on the road. Each set uses mild or stainless steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your SB Ford's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated mild steel, MID-LENGTH TUBE headers fit the most iconic passenger cars to come out of Ford and Mercury between 1964-1977, with a 260-302W. Among this prestigious list is 1964-73 Ford Mustang and Falcon, '66-73 Ranchero & Torino, '69-77 Maverick, '66-70 Fairlane, '67-73 Mercury Cougar and'70-73 Comet models fitted with a 260-302W engine. These headers fit automatic transmission equipped vehicles only. The long, smooth 1-1/2 in., rectangle port tube design provides superior exhaust flow over factory manifolds to let your Ford Windsor block engine breathe better, and produce more low-end torque and horsepower.
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish, as well as 100% stainless steel construction.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1969 - Ford Falcon | V | - | United States | GAS | 8 Cyl 5.0L | Base | Naturally Aspirated | 302 |
- Mid-Length Headers For '64-73 Mustang/Cougar & Others with 260-302
- Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: No Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: No Footnotes: (1) Without smog injection or injection heads. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.; Does not require EO if existing emission controls are not removed.
- Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 2-1/2 in. Coll.; SHORTY Design
- Product Attributes:
- Header Port Shape: Square
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Square
- Header Style: Mid-length Tube
- Manual Transmission - Column: No
- Finish: Uncoated
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-1/2 In.
- Automatic Transmission - Column: No
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-1/2 In.
- Port Shape: Square
- Tube Length: Short Tubes
- Manual Transmission - Floor: No
- Collector Diameter: 2-1/2 In.
- Tube Style: Shorty
- Engine Version: Ford Windsor Block (w)
- Variations: 88406, 88408
- Collector Size: 2-1/2 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 2-1/2 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Finish Type:
- Uncoated Mild Steel
- Uncoated Mild Steel! Shipped With Temporary Paint.
- Notes: 66-73 Ford Mustang 260-302w
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.50 In.
- Crossover Pipe Included: No
- Header Construction: Mild Steel- Standard-duty
- Replacement Head Flange Gasket: 27340
- Tube Design: Standard
- Material: Mild Steel
- Power Steering: Yes
- E.O. #: No
- Engine Notes: 260-302w
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Engine: Ford Sb 260-289-302w
- Air Conditioning: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27340
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Handcrafted, Mild Steel Construction.
- The Short Tube Header Design Provides Good Low-End Power, and Provides Excellent Ground Clearance And Component Compatibility.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Ford Mustang headers for nearly as long as Mustangs have been on the road. Each set uses mild or stainless steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your SB Ford's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated mild steel, MID-LENGTH TUBE headers fit the most iconic passenger cars to come out of Ford and Mercury between 1964-1977, with a 260-302W. Among this prestigious list is 1964-73 Ford Mustang and Falcon, '66-73 Ranchero & Torino, '69-77 Maverick, '66-70 Fairlane, '67-73 Mercury Cougar and'70-73 Comet models fitted with a 260-302W engine. These headers fit automatic transmission equipped vehicles only. The long, smooth 1-1/2 in., rectangle port tube design provides superior exhaust flow over factory manifolds to let your Ford Windsor block engine breathe better, and produce more low-end torque and horsepower.
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish, as well as 100% stainless steel construction.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1969 - Mercury Comet | V | - | United States | GAS | 8 Cyl 5.0L | Base | Naturally Aspirated | 302 |
- Mid-Length Headers For '64-73 Mustang/Cougar & Others with 260-302
- Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: No Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: No Footnotes: (1) Without smog injection or injection heads. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed. Engine Family: SB FORD 260-302 (Windsor)
- Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 2-1/2 in. Coll.; SHORTY Design
- Product Attributes:
- Header Port Shape: Square
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Square
- Header Style: Mid-length Tube
- Manual Transmission - Column: No
- Finish: Uncoated
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-1/2 In.
- Automatic Transmission - Column: No
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-1/2 In.
- Port Shape: Square
- Tube Length: Short Tubes
- Manual Transmission - Floor: No
- Collector Diameter: 2-1/2 In.
- Tube Style: Shorty
- Engine Version: Ford Windsor Block (w)
- Variations: 88406, 88408
- Collector Size: 2-1/2 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 2-1/2 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
- Notes: 66-73 Ford Mustang 260-302w
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.50 In.
- Crossover Pipe Included: No
- Header Construction: Mild Steel- Standard-duty
- Replacement Head Flange Gasket: 27340
- Tube Design: Standard
- Material: Mild Steel
- Power Steering: Yes
- E.O. #: No
- Engine Notes: 260-302w
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Engine: Ford Sb 260-289-302w
- Air Conditioning: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27340
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Handcrafted, Mild Steel Construction.
- The Short Tube Header Design Provides Good Low-End Power, and Provides Excellent Ground Clearance And Component Compatibility.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Ford Mustang headers for nearly as long as Mustangs have been on the road. Each set uses mild or stainless steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your SB Ford's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated mild steel, MID-LENGTH TUBE headers fit the most iconic passenger cars to come out of Ford and Mercury between 1964-1977, with a 260-302W. Among this prestigious list is 1964-73 Ford Mustang and Falcon, '66-73 Ranchero & Torino, '69-77 Maverick, '66-70 Fairlane, '67-73 Mercury Cougar and'70-73 Comet models fitted with a 260-302W engine. These headers fit automatic transmission equipped vehicles only. The long, smooth 1-1/2 in., rectangle port tube design provides superior exhaust flow over factory manifolds to let your Ford Windsor block engine breathe better, and produce more low-end torque and horsepower.
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish, as well as 100% stainless steel construction.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1969 - Ford Falcon | V | - | United States | GAS | 8 Cyl 5.0L | Base | Naturally Aspirated | 302 |
- Mid-Length Headers For '64-73 Mustang/Cougar & Others with 260-302
- Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: No Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: No Footnotes: (1) Without smog injection or injection heads. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R. Does not require EO if existing emission controls are not removed.
- Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 2-1/2 in. Coll.; SHORTY Design
- Product Attributes:
- Header Port Shape: Square
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Square
- Header Style: Mid-length Tube
- Manual Transmission - Column: No
- Finish: Uncoated
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-1/2 In.
- Automatic Transmission - Column: No
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-1/2 In.
- Port Shape: Square
- Tube Length: Short Tubes
- Manual Transmission - Floor: No
- Collector Diameter: 2-1/2 In.
- Tube Style: Shorty
- Engine Version: Ford Windsor Block (w)
- Variations: 88406, 88408
- Collector Size: 2-1/2 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 2-1/2 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Finish Type: Uncoated Mild Steel! Shipped With Temporary Paint.
- Notes: 66-73 Ford Mustang 260-302w
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.50 In.
- Crossover Pipe Included: No
- Header Construction: Mild Steel- Standard-duty
- Replacement Head Flange Gasket: 27340
- Tube Design: Standard
- Material: Mild Steel
- Power Steering: Yes
- E.O. #: No
- Engine Notes: 260-302w
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Engine: Ford Sb 260-289-302w
- Air Conditioning: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27340
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Handcrafted, Mild Steel Construction.
- The Short Tube Header Design Provides Good Low-End Power, and Provides Excellent Ground Clearance And Component Compatibility.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Ford Mustang headers for nearly as long as Mustangs have been on the road. Each set uses mild or stainless steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your SB Ford's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated mild steel, MID-LENGTH TUBE headers fit the most iconic passenger cars to come out of Ford and Mercury between 1964-1977, with a 260-302W. Among this prestigious list is 1964-73 Ford Mustang and Falcon, '66-73 Ranchero & Torino, '69-77 Maverick, '66-70 Fairlane, '67-73 Mercury Cougar and'70-73 Comet models fitted with a 260-302W engine. These headers fit automatic transmission equipped vehicles only. The long, smooth 1-1/2 in., rectangle port tube design provides superior exhaust flow over factory manifolds to let your Ford Windsor block engine breathe better, and produce more low-end torque and horsepower.
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish, as well as 100% stainless steel construction.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1969 - Mercury Comet | V | - | United States | GAS | 8 Cyl 5.0L | Base | Naturally Aspirated | 302 |
- Long-Tube Headers For 67-81 Camaro, 68-79 Nova with 283-400
- Air Conditioning: Will not fit 1967-69 Camaros with A/C. - 1970 or later only- A/C equipped vehicles require bracket 20110.(Large piston compressor). Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Yes Footnotes: (1) Without smog injection or injection heads. Footnotes: (104) On some models it may be necessary to remove Z bars. (SS Series) Footnotes: (121) Must modify rotary A/C bracket. Footnotes: (49) Will not fit (Saginaw) close ratio P/S with 825 power steering box, 1967-69. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.: Legal for use on '74-earlier vehicles without A.I.R.. Considered OEM replacement part, and do not require EO, when existing emission controls are not removed. Engine Family: SB Chevy 283-400 (Gen 1) Y-Pipe Included:No with EGR:No with A.I.R. System:No Package Contents:Set of Headers, mounting hardware and gaskets Installation Hardware Included:Yes Replacement Gasket:27500 Cylinder Head:Stock Profile Heads Quantity:Sold as a pair. Motor Mounts Included:No Crossover Pipe Included:No Catalytic Converter(s) Included:No Collector Bolts Included:Yes Catalog Code:HED Weld-Up:No Tuned:No Primary Tube Gauge:18g Primary Tube Diameter (in):1.625 in. Mounting Hardware Included:Yes Header Material:Mild Steel Header Finish:Uncoated Cylinder Head Port Shape:Round Variations:68276, 68278 Tube Size:1-5/8 in. Tube Material Thickness:18g Tube Length:Long Tubes Tube Diameter:1-5/8 in. Tube Design:LONG TUBES Reducer Outlet Size:2-1/2 in. Power Steering:Yes Port Shape:Round Material:Mild Steel Manual Transmission - Floor:Yes Manual Transmission - Column:No Header Port Shape:Round Replacement Head Flange Gasket:27500 Flange Style:Standard Finish Type:Uncoated Mild steel Finish:Uncoated Exhaust System Dia:2-1/2 in. Collector Style:Ball and Socket Style (Gasketless) Collector Size:3 in. Automatic Transmission - Floor:Yes Automatic Transmission - Column:Yes Air Conditioning:Yes Reducers Included:Yes Header Style:Long Tube Gasket Or Seal Included:Yes Collector Attachment:3 in. Flange Thickness:0.25 in. Bolts/Studs Included:Yes Air Conditioning Notes:NO AC equipped Gen 1 Camaro or Gen 2 Nova; 70-Up with A/C require bracket 20110. Header Construction:Standard-Duty E.O. #:No California Proposition 65:WARNING: Cancer. For more info visit www.P65Warnings.ca.gov Contents:Header(s), new bolts, gasket(s) to head, reducer(s) and hardware, instructions Title:HEDMAN HEDDERS STANDARD UNCOATED HEADERS; 1-5/8 IN. TUBE DIA.; 3 IN. COLL.; FULL LENGTH DESIGN Notes :67-68 Camaro, 68-79 Nova 283-400 Emissions Notes:NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only. Collector Diameter:3 in. Tube Style:Long Tubes
- Standard Uncoated Headers; 1-5/8 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
- Product Attributes:
- Header Port Shape: Round
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Round
- Header Style: Long Tube
- Manual Transmission - Column: No
- Finish: Uncoated
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness:
- 16g
- 18g
- Tube Diameter: 1-5/8 In.
- Automatic Transmission - Column: Yes
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-5/8 In.
- Port Shape: Round
- Tube Length: Long Tubes
- Manual Transmission - Floor: Yes
- Collector Diameter: 3 In.
- Tube Style: Long Tubes
- Air Conditioning Notes: No Ac Equipped Gen 1 Camaro Or Gen 2 Nova; 70-up With A/c Require Bracket 20110.
- Variations: 68276, 68278
- Collector Size: 3 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 3 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Finish Type:
- Uncoated Mild Steel
- Uncoated Mild Steel! Shipped With Temporary Paint.
- Notes: 67-68 Camaro, 68-79 Nova 283-400
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.625 In.
- Crossover Pipe Included: No
- Header Construction:
- Mild Steel- Standard-duty
- Standard-duty
- Replacement Head Flange Gasket: 27500
- Tube Design:
- Long Tubes
- Standard
- Material: Mild Steel
- Power Steering: Yes
- E.O. #: No
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness:
- 0.25 In.
- 0.3125 In.
- Air Conditioning: Yes
- Reducers Included: Yes
- Primary Tube Gauge:
- 16g
- 18g
- Header Material: Mild Steel
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27500
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
- Handcrafted, Mild Steel Construction.
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing long and MID-LENGTH tube headers for Chevy passenger cars for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These LONG-TUBE headers fit 1967-1981 Chevy Camaros, and 1968-1979 Chevy II and Nova models fitted with a SB Chevy (Gen 1) engine. The smooth 1-5/8 in tube design provides ample exhaust flow to let your 283-400 SB Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed. Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Cylinder Head Type | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1969 - Chevrolet Camaro | V | - | OHV | United States | GAS | 8 Cyl 5.7L | Base | Naturally Aspirated | 350 |
- Long-Tube Headers For 67-81 Camaro, 68-79 Nova with 283-400
- Air Conditioning: No Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Yes Footnotes: (1) Without smog injection or injection heads. Footnotes: (49) Will not fit (Saginaw) close ratio P/S with 825 power steering box, 1967-69. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.: Legal for use on '74-earlier vehicles without A.I.R.. Considered OEM replacement part, and do not require EO, when existing emission controls are not removed. Engine Family: SB Chevy 283-400 (Gen 1) Y-Pipe Included:No with EGR:No with A.I.R. System:No Package Contents:Set of Headers, mounting hardware and gaskets Installation Hardware Included:Yes Replacement Gasket:27500 Cylinder Head:Stock Profile Heads Quantity:Sold as a pair. Motor Mounts Included:No Crossover Pipe Included:No Catalytic Converter(s) Included:No Collector Bolts Included:Yes Catalog Code:HED Weld-Up:No Tuned:No Primary Tube Gauge:18g Primary Tube Diameter (in):1.625 in. Mounting Hardware Included:Yes Header Material:Mild Steel Header Finish:Uncoated Cylinder Head Port Shape:Round Variations:68276, 68278 Tube Size:1-5/8 in. Tube Material Thickness:18g Tube Length:Long Tubes Tube Diameter:1-5/8 in. Tube Design:LONG TUBES Reducer Outlet Size:2-1/2 in. Power Steering:Yes Port Shape:Round Material:Mild Steel Manual Transmission - Floor:Yes Manual Transmission - Column:No Header Port Shape:Round Replacement Head Flange Gasket:27500 Flange Style:Standard Finish Type:Uncoated Mild steel Finish:Uncoated Exhaust System Dia:2-1/2 in. Collector Style:Ball and Socket Style (Gasketless) Collector Size:3 in. Automatic Transmission - Floor:Yes Automatic Transmission - Column:Yes Air Conditioning:Yes Reducers Included:Yes Header Style:Long Tube Gasket Or Seal Included:Yes Collector Attachment:3 in. Flange Thickness:0.25 in. Bolts/Studs Included:Yes Air Conditioning Notes:NO AC equipped Gen 1 Camaro or Gen 2 Nova; 70-Up with A/C require bracket 20110. Header Construction:Standard-Duty E.O. #:No California Proposition 65:WARNING: Cancer. For more info visit www.P65Warnings.ca.gov Contents:Header(s), new bolts, gasket(s) to head, reducer(s) and hardware, instructions Title:HEDMAN HEDDERS STANDARD UNCOATED HEADERS; 1-5/8 IN. TUBE DIA.; 3 IN. COLL.; FULL LENGTH DESIGN Notes :67-68 Camaro, 68-79 Nova 283-400 Emissions Notes:NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only. Collector Diameter:3 in. Tube Style:Long Tubes
- Standard Uncoated Headers; 1-5/8 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
- Product Attributes:
- Header Port Shape: Round
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Round
- Header Style: Long Tube
- Manual Transmission - Column: No
- Finish: Uncoated
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness:
- 16g
- 18g
- Tube Diameter: 1-5/8 In.
- Automatic Transmission - Column: Yes
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-5/8 In.
- Port Shape: Round
- Tube Length: Long Tubes
- Manual Transmission - Floor: Yes
- Collector Diameter: 3 In.
- Tube Style: Long Tubes
- Air Conditioning Notes: No Ac Equipped Gen 1 Camaro Or Gen 2 Nova; 70-up With A/c Require Bracket 20110.
- Variations: 68276, 68278
- Collector Size: 3 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 3 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Finish Type:
- Uncoated Mild Steel
- Uncoated Mild Steel! Shipped With Temporary Paint.
- Notes: 67-68 Camaro, 68-79 Nova 283-400
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.625 In.
- Crossover Pipe Included: No
- Header Construction:
- Mild Steel- Standard-duty
- Standard-duty
- Replacement Head Flange Gasket: 27500
- Tube Design:
- Long Tubes
- Standard
- Material: Mild Steel
- Power Steering: Yes
- E.O. #: No
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness:
- 0.25 In.
- 0.3125 In.
- Air Conditioning: Yes
- Reducers Included: Yes
- Primary Tube Gauge:
- 16g
- 18g
- Header Material: Mild Steel
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27500
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
- Handcrafted, Mild Steel Construction.
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing long and MID-LENGTH tube headers for Chevy passenger cars for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These LONG-TUBE headers fit 1967-1981 Chevy Camaros, and 1968-1979 Chevy II and Nova models fitted with a SB Chevy (Gen 1) engine. The smooth 1-5/8 in tube design provides ample exhaust flow to let your 283-400 SB Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed. Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Cylinder Head Type | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1969 - Chevrolet Nova | V | - | OHV | United States | GAS | 8 Cyl 5.7L | Base | Naturally Aspirated | 350 |
- Long-Tube Headers For 67-81 Camaro, 68-79 Nova with 283-400
- Air Conditioning: Not for '67-69 with A/C! 1970 and later with Large Piston A/C need bracket 20110 Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Yes Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Footnotes: (1) Without smog injection or injection heads. Footnotes: (104) On some models it may be necessary to remove Z bars. (SS Series) Footnotes: (121) Must modify rotary A/C bracket. Footnotes: (49) Will not fit (Saginaw) close ratio P/S with 825 power steering box, 1967-69. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.; Does not require EO if existing emission controls are not removed. Engine Family: SB Chevy 283-400 (Gen 1)
- Standard Uncoated Headers; 1-5/8 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
- Product Attributes:
- Header Port Shape: Round
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Round
- Header Style: Long Tube
- Manual Transmission - Column: No
- Finish: Uncoated
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-5/8 In.
- Automatic Transmission - Column: Yes
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-5/8 In.
- Port Shape: Round
- Tube Length: Long Tubes
- Manual Transmission - Floor: Yes
- Collector Diameter: 3 In.
- Tube Style: Long Tubes
- Air Conditioning Notes: No Ac Equipped Gen 1 Camaro Or Gen 2 Nova; 70-up With A/c Require Bracket 20110.
- Variations: 68276, 68278
- Collector Size: 3 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 3 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Finish Type:
- Uncoated Mild Steel
- Uncoated Mild Steel! Shipped With Temporary Paint.
- Notes: 67-68 Camaro, 68-79 Nova 283-400
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.625 In.
- Crossover Pipe Included: No
- Header Construction: Mild Steel- Standard-duty
- Replacement Head Flange Gasket: 27500
- Tube Design: Standard
- Material: Mild Steel
- Power Steering: Yes
- E.O. #: No
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Air Conditioning: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27500
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
- Handcrafted, Mild Steel Construction.
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing long and MID-LENGTH tube headers for Chevy passenger cars for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These LONG-TUBE headers fit 1967-1981 Chevy Camaros, and 1968-1979 Chevy II and Nova models fitted with a SB Chevy (Gen 1) engine. The smooth 1-5/8 in tube design provides ample exhaust flow to let your 283-400 SB Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed. Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Cylinder Head Type | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1969 - Chevrolet Camaro | V | - | OHV | United States | GAS | 8 Cyl 5.7L | Base | Naturally Aspirated | 350 |
- Long-Tube Headers For 67-81 Camaro, 68-79 Nova with 283-400
- Air Conditioning: Not for '67-69 with A/C! 1970 and later with Large Piston A/C need bracket 20110 Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Yes Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Footnotes: (1) Without smog injection or injection heads. Footnotes: (104) On some models it may be necessary to remove Z bars. (SS Series) Footnotes: (121) Must modify rotary A/C bracket. Footnotes: (49) Will not fit (Saginaw) close ratio P/S with 825 power steering box, 1967-69. Engine Family: SB Chevy 283-400 (Gen 1) Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.; Does not require EO if existing emission controls are not removed.
- Standard Uncoated Headers; 1-5/8 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
- Product Attributes:
- Header Port Shape: Round
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Round
- Header Style: Long Tube
- Manual Transmission - Column: No
- Finish: Uncoated
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-5/8 In.
- Automatic Transmission - Column: Yes
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-5/8 In.
- Port Shape: Round
- Tube Length: Long Tubes
- Manual Transmission - Floor: Yes
- Collector Diameter: 3 In.
- Tube Style: Long Tubes
- Air Conditioning Notes: No Ac Equipped Gen 1 Camaro Or Gen 2 Nova; 70-up With A/c Require Bracket 20110.
- Variations: 68276, 68278
- Collector Size: 3 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 3 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Finish Type:
- Uncoated Mild Steel
- Uncoated Mild Steel! Shipped With Temporary Paint.
- Notes: 67-68 Camaro, 68-79 Nova 283-400
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.625 In.
- Crossover Pipe Included: No
- Header Construction: Mild Steel- Standard-duty
- Replacement Head Flange Gasket: 27500
- Tube Design: Standard
- Material: Mild Steel
- Power Steering: Yes
- E.O. #: No
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Air Conditioning: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27500
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
- Handcrafted, Mild Steel Construction.
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing long and MID-LENGTH tube headers for Chevy passenger cars for decades. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These LONG-TUBE headers fit 1967-1981 Chevy Camaros, and 1968-1979 Chevy II and Nova models fitted with a SB Chevy (Gen 1) engine. The smooth 1-5/8 in tube design provides ample exhaust flow to let your 283-400 SB Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed. Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1969 - Chevrolet Camaro | V | 5358 | United States | GAS | 8 Cyl 5.3L | Base | Naturally Aspirated | 327 |
Loading...