2013 Ford Hellwig Parts
Choose a Model for your 2013 Ford
Image
Product
Price
- Contact Helper Spring
- Contact Helper Spring Ford 88-15 F250/350 Super Duty, 20-23 Chevrolet Silverado/GMC Sierra 3500 HD 2wd/4wd Pickup SRW, 21-23 Ram 4500/5500 Cab and Chassis. All MUST have factory contact overload leaf springs.
- Add assistance to your factory overload springs with Hellwig's Contact Helper Springs. Get help sooner with the contact helper, as the vehicle is loaded the Hellwig contact helper spring connects with the factory contact pads sooner providing better support and less sag for heavy loads. When in contact, the extra Hellwig leaves stiffen the overload springs decreasing the sag of the vehicle in a loaded condition. Hellwig contact overload assist springs mount directly to the factory contact springs for easy install and better load support to increase the truck's level-load carrying capacity. In normal use, they leave performance unchanged.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Ford F-350 |
- Big Wig Rear Sway Bar
- A,B
- 1-1/4" Big Wig Rear Sway Bar Ford 11-16 F250/350 Super Duty Single Wheel 4WD
- Sway Bars
- For your money, the best aftermarket investment you can make! Hellwig Big Wig sway bars are an extremely effective handling upgrade you can make to your heavy duty truck. Specifically designed for heavy duty tow and haul applications, Hellwig Big Wig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig Big Wig sway bar installed. Most trucks do not come equipped with factory rear sway bars and see a drastic increase in body roll when towing or hauling a heavy load. Hellwig Big Wig sway bars are the largest diameter sway bars available from Hellwig and are precision engineered components to optimize handling for towing and hauling.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2013 - Ford F-350 Super Duty | 4WD |
- Contact Helper Spring
- Designed for trucks with a Factory Contact Helper Spring: Two leaf helper spring: fits on top of factory contact overload
- Contact Helper Spring Ford 88-15 F250/350 Super Duty, 20-23 Chevrolet Silverado/GMC Sierra 3500 HD 2wd/4wd Pickup SRW, 21-23 Ram 4500/5500 Cab and Chassis. All MUST have factory contact overload leaf springs.
- Add assistance to your factory overload springs with Hellwig's Contact Helper Springs. Get help sooner with the contact helper, as the vehicle is loaded the Hellwig contact helper spring connects with the factory contact pads sooner providing better support and less sag for heavy loads. When in contact, the extra Hellwig leaves stiffen the overload springs decreasing the sag of the vehicle in a loaded condition. Hellwig contact overload assist springs mount directly to the factory contact springs for easy install and better load support to increase the truck's level-load carrying capacity. In normal use, they leave performance unchanged.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Ford F-350 Super Duty |
- EZ-990 Helper Spring Kit
- EZ Level Up to 2000 lbs. Step Bracket Style Leaf; 2 and 4 wheel drive
- EZ-990 Helper Spring Kit for 09-14 Ford F150 2wd/4wd
- Hellwig's medium-duty EZ-990 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 2,000 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Ford F-150 |
- EZ-990 Helper Spring Kit
- EZ Level; Up to 2000 lbs load assist single leaf
- EZ-990 Helper Spring Kit for Dodge, Ford, GM, Toyota
- Hellwig's medium-duty EZ-990 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 2,000 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Ford E-150 |
- Not Applicable for Vehicles Equipped with Load Leveling Sensors
- 3500 lbs. Capacity; 4 Leaf Stack; Do Not Use w/Factory Overload Contact Springs; or use 9703; Requires PN[25301] mounting hardware
- Not Applicable for Vehicles Equipped with Load Leveling Sensors
- The Hellwig LP-35 Helper Spring set the standard for all other aftermarket helper springs. Featuring a Fulltime Spring Rate design it is the workhorse of the Hellwig Spring line. This is ideal for fleet applications or vehicles that consistently carry a heavy load day in and day out.
Additional Fitment Information:
| Vehicle | Body | Drive Type |
|---|---|---|
| 2013 - Ford F-250 Super Duty | Extended Cab Pickup | RWD |
- Not Applicable for Vehicles Equipped with Load Leveling Sensors
- Up to 3500 lbs. load assist; 4 Leaf Stack; Do Not Use w/Factory Overload Contact Springs; or use 9703; Requires PN[25301] mounting hardware; 2 and 4 wheel drive
- Not Applicable for Vehicles Equipped with Load Leveling Sensors
- The Hellwig LP-35 Helper Spring set the standard for all other aftermarket helper springs. Featuring a Fulltime Spring Rate design it is the workhorse of the Hellwig Spring line. This is ideal for fleet applications or vehicles that consistently carry a heavy load day in and day out.
Additional Fitment Information:
| Vehicle | Body | Drive Type |
|---|---|---|
| 2013 - Ford F-350 Super Duty | Crew Cab Pickup | RWD |
- Rear Sway Bar Kit
- 1 1/2" Rear Sway Bar; Cutaway chassis; dual wheel; with rear disc brakes with out factory RSB
- 1-1/2" Rear Sway Bar Ford 75-22 E350 Cutaway Chassis 2WD
- For your money, the best aftermarket investment you can make! Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig sway bar installed. Though most vehicles come equipped with factory installed sway bars, they are often insufficient for today?s load and tow demands. Hellwig sway bars feature larger than stock diameters and precision engineered components to optimize handling and reduce body roll.
Additional Fitment Information:
| Vehicle | Body | Drive Type |
|---|---|---|
| 2013 - Ford E-350 Super Duty | Cutaway Van | RWD |
- Rear Sway Bar Kit
- 7/8" Rear Sway Bar Ford 07-22 Expedition/Navigator 2WD/4WD
- Sway Bars
- For your money, the best aftermarket investment you can make! Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig sway bar installed. Though most vehicles come equipped with factory installedsway bars, they are often insufficient for today's load and tow demands. Hellwig sway bars feature larger than stock diameters and precision engineered components to optimize handling and reduce body roll.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2013 - Ford Expedition | 4WD |
- Front Sway Bar Kit
- Fits stock height up to 6" lift.
- 1-1/2" Front Sway Bar Kit Ford 09-20 F150 2WD/4WD
- Sway Bars
- For your money, the best aftermarket investment you can make! Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig sway bar installed. Though most vehicles come equipped with factory installed sway bars, they are often insufficient for today?s load and tow demands. Hellwig sway bars feature larger than stock diameters and precision engineered components to optimize handling and reduce body roll.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2013 - Ford F-150 | 4WD |
Showing 1 - 10 of 41 products
Loading...