Image
Product
Price
- Single 2.5 in. Lightweight Stainless Steel Tubing; Includes Tubing/Muffler/Hardware/Angle-Cut Exhaust Tip; High Clearance Design
- Blackheart Cat-Back Exhaust System; Single 2.5 in. Lightweight Stainless Steel Tubing; Includes Tubing/Muffler/Hardware/Angle-Cut Exhaust Tip; High Clearance Design;
- Blackheart Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tube Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Muffler Type: High-flow And Straight-through
- Exit Position: Single Straight Driver Side Rear
- Tip Diameter: 2.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: No Muffler
-
Features:
- 2.5 in. Lightweight 18 Gauge Mandrel Bent 304 Stainless Steel
- Mid Mount Muffler Design Produces A Mild Healthy Exhaust Note
- Removes OEM Muffler Freeing Up Space/Removing Unwanted Weight
- High Tuck Design For The Most Demanding Off Road Conditions
- Max Dyno Gains Of 10 HP And 7.1 lb./ft. Torque
- Up To 48% Weight Savings Over OE Muffler
- A Savings Of 14 lbs.
- 100% Quality Hand-Welded Construction
- Utilizes OEM Mounting Points For Factory-Like Fitment
- Tube Geometry Designed For Hassle-Free Installation
- All Hardware Included
- Limited Lifetime Warranty
- Hooker continues to push the boundaries of performance with the BlackHeart line of exhaust products. We are proud to offer these axle-back and cat-back exhaust systems for 2018 Jeep Wrangler JL vehicles (2 & 4 door). These 2.5", High Clearance systems are engineered to offer both premium fitment and maximum performance from your 3.6L engine.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2018 - Jeep Wrangler | L | 1997 | 4 Cyl 2.0L | Unlimited Sport | 122 |
- Single 2.5 in. Lightweight Stainless Steel Tubing; Includes Tubing/Muffler/Hardware/Angle-Cut Exhaust Tip; High Clearance Design;50 State Legal / California Emissions Compliant
- Blackheart Cat-Back Exhaust System; Single 2.5 in. Lightweight Stainless Steel Tubing; Includes Tubing/Muffler/Hardware/Angle-Cut Exhaust Tip; High Clearance Design;
- Blackheart Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tube Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Muffler Type: High-flow And Straight-through
- Exit Position: Single Straight Driver Side Rear
- Tip Diameter: 2.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: No Muffler
-
Features:
- 2.5 in. Lightweight 18 Gauge Mandrel Bent 304 Stainless Steel
- Mid Mount Muffler Design Produces A Mild Healthy Exhaust Note
- Removes OEM Muffler Freeing Up Space/Removing Unwanted Weight
- High Tuck Design For The Most Demanding Off Road Conditions
- Max Dyno Gains Of 10 HP And 7.1 lb./ft. Torque
- Up To 48% Weight Savings Over OE Muffler
- A Savings Of 14 lbs.
- 100% Quality Hand-Welded Construction
- Utilizes OEM Mounting Points For Factory-Like Fitment
- Tube Geometry Designed For Hassle-Free Installation
- All Hardware Included
- Limited Lifetime Warranty
- Hooker continues to push the boundaries of performance with the BlackHeart line of exhaust products. We are proud to offer these axle-back and cat-back exhaust systems for 2018 Jeep Wrangler JL vehicles (2 & 4 door). These 2.5", High Clearance systems are engineered to offer both premium fitment and maximum performance from your 3.6L engine.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Sport | 220 |
- 3 in. To Dual 2.500 in. Tube Dia./409 Stainless Steel; Dual 2.500 in. Muffler OD./309 Stainless Steel; 4.5 in. Carbon Fiber Tips;50 State Legal / California Emissions Compliant Fits Models With Factory Dual Exhaust
- Blackheart Cat-Back Exhaust System; 3 in. To Dual 2.500 in. Tube Dia./409 Stainless Steel; Dual 2.500 in. Muffler OD./309 Stainless Steel; 4.5 in. Carbon Fiber Tips;
- Blackheart Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tube Diameter: 2.500 In.
- Tubing Diameter: 3.000 In. - 2.500 In.
- Exhaust Type: Cat-back
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Lightweight 18 Gauge Mandrel Bent Stainless Steel Tubing
- Angle Cut Rolled Edge Resonated Tips w/Laser Etched Logo
- 100% Hand-Welded Construction For Strength/Longevity/Good Looks
- Utilizes OEM Mounting Points For Factory-Like Fitment
- Tube Geometry Designed For Max Clearance/Hassle Free Install
- All Hardware Included
- Limited Lifetime Warranty
- This Cat-back exhaust is for 2019-2021 Ram 1500 with 5.7L V8 engines. It is constructed from stainless steel for lightweight, strength and superior corrosion resistance. It uses a high flow straight through muffler to provide a deep sporty tone and produces an extra 14 HP and 21 ft.-lb. torque. This system includes 4-1/2 inch Carbon Fiber exhaust tips to deliver custom sound and appearance.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2019 - Ram 1500 | V | - | 8 Cyl 5.7L | 76.3 | Rebel | 345 |
- 3 in. To Dual 2.500 in. Tube Dia./409 Stainless Steel; Dual 2.500 in. Muffler OD./309 Stainless Steel; 4.5 in. Carbon Fiber Tips
- Blackheart Cat-Back Exhaust System; 3 in. To Dual 2.500 in. Tube Dia./409 Stainless Steel; Dual 2.500 in. Muffler OD./309 Stainless Steel; 4.5 in. Carbon Fiber Tips;
- Blackheart Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tube Diameter: 2.500 In.
- Tubing Diameter: 3.000 In. - 2.500 In.
- Exhaust Type: Cat-back
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Lightweight 18 Gauge Mandrel Bent Stainless Steel Tubing
- Angle Cut Rolled Edge Resonated Tips w/Laser Etched Logo
- 100% Hand-Welded Construction For Strength/Longevity/Good Looks
- Utilizes OEM Mounting Points For Factory-Like Fitment
- Tube Geometry Designed For Max Clearance/Hassle Free Install
- All Hardware Included
- Limited Lifetime Warranty
- This Cat-back exhaust is for 2019-2021 Ram 1500 with 5.7L V8 engines. It is constructed from stainless steel for lightweight, strength and superior corrosion resistance. It uses a high flow straight through muffler to provide a deep sporty tone and produces an extra 14 HP and 21 ft.-lb. torque. This system includes 4-1/2 inch Carbon Fiber exhaust tips to deliver custom sound and appearance.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | - | 8 Cyl 5.7L | 67.4 | Special Service | 345 |
- Super Competition 3 Bolt Flange Reducer
- Super Competition 3 Bolt Flange Reducer; 2.5 in. OD Collector; 2.5 in. OD Tailpipe;
- Product Attributes:
- Pipe Size: 2.500 In.
- Flange Length: 2.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Mounting: Bolt-on
- Collector Diameter: 2.500 In.
-
Features:
- Bolt-On Reducer
- Weld To Exhaust Pipe
- Just pick the reducer size that matches the diameter of the header collector. Bolt it to the collector ring, and weld on the tailpipe. If you have a header without the collector ring, use Hooker slip-on reducers. Theyre sized to slip over the collector and weld to the exhaust pipe.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Super Competition 3 Bolt Flange Reducer
- Super Competition 3 Bolt Flange Reducer; 3.5 in. OD Collector; 2.5 in. OD Tailpipe;
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Mounting: Bolt-on
-
Features:
- Bolt-On Reducer
- Weld To Exhaust Pipe
- Just pick the reducer size that matches the diameter of the header collector. Bolt it to the collector ring, and weld on the tailpipe. If you have a header without the collector ring, use Hooker slip-on reducers. Theyre sized to slip over the collector and weld to the exhaust pipe.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Super Competition J-Bend Tube
- Super Competition J-Bend Tube; Tube Size 2 in. OD; Radius 3 in.; Leg A 6 in.; Leg B 15 in.; 180 deg.; 18 Gauge Mild Steel;
- Product Attributes:
- Tube Material: Mild Steel
- Primary Tube Diameter: 2.000 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Style: J Bend
- Diameter (in.): 2 Od/2 Od
-
Features:
- Wrinkle-Free Surface
- No Crimping
- Mandrel Bent Tubing
- Super Competition 180 Degree Mandrel J-Bends. Tubing Is Available In Mild Steel, Stainless Steel And Aluminized Steel.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Super Competition 3 Bolt Flange Reducer
- Super Competition 3 Bolt Flange Reducer; 3.5 in. OD Collector; 3 in. OD Tailpipe;
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Mounting: Bolt-on
-
Features:
- Bolt-On Reducer
- Weld To Exhaust Pipe
- Just pick the reducer size that matches the diameter of the header collector. Bolt it to the collector ring, and weld on the tailpipe. If you have a header without the collector ring, use Hooker slip-on reducers. Theyre sized to slip over the collector and weld to the exhaust pipe.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Engine Mount Brackets
- Engine Mount Brackets; For 1984-1995 Ford Mustang w/Coyote Engine Swap w/Stock K-Member; Steel Construction; Powder Coated Finish; Includes Hardware;
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Bracket To Frame Hardware Included
- CAD Designed Fabricated Steel Construction For Strength/Fitment
- These Hooker BlackHeart Engine Mount Brackets for 1984-1995 Mustangs allow a coyote engine to be installed on the stock K-member. Fabricated from steel and powder-coated black for superior strength and corrosion resistance. These mounts are part of a complete coyote swap system for a Fox or SN95.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Super Competition 3 Bolt Flange Reducer
- Super Competition 3 Bolt Flange Reducer; 3 in. OD Collector; 3 in. OD Tailpipe; Pair;
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Mounting: Bolt-on
-
Features:
- Bolt-On Reducer
- Weld To Exhaust Pipe
- Just pick the reducer size that matches the diameter of the header collector. Bolt it to the collector ring, and weld on the tailpipe. If you have a header without the collector ring, use Hooker slip-on reducers. Theyre sized to slip over the collector and weld to the exhaust pipe.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
Showing 1 - 10 of 17 products
Loading...