Image
Product
Price
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA BILLET REAR LOWER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Control Arm Material: Aluminum
- Finish: Anodized
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Silver
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Aluminum
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Grease Fitting Included: No
- Pre-Greased: Yes
- Construction: Billet
- Reinforced: Yes
-
Features:
- On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon Rock Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON’s billet aluminum rear lower link arms for the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, and 2024 Toyota Tacoma are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON’s engineering team has also gone a step further in the development of these products by incorporating features such replaceable nylon rock sliders to prevent any hang-ups on the trail. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Toyota Sequoia | Rear Lower | TRD Pro |
- The ICON Tubular Rear Lower Link System helps free up rear axle movement to allow for increased suspension travel and articulation. Formed using DOM steel tubing for high strength, with CNC machined threaded ends and bushing housings.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA TUBULAR REAR LOWER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Rod End Bearing
- Control Arm Material: Dom Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Bushing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Steel
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Grease Fitting Included: No
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- Adjustable for various lift heights & driveline angles
- Help free rear suspension bind compared to OE links
- High clearance Lower Link design for reduced contact with obstacles
- CNC machined & notched 1026 DOM steel construction with semi-gloss black powder coat finish
- Multi durometer bushings for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Fabricated components covered under ICON's Limited Lifetime Warranty
- The ICON Tubular Rear Lower Link System helps free up rear axle movement on the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, and 2024 Toyota Tacoma to allow for increased suspension travel and articulation. Formed using 1 ¾” x .313 wall DOM Tubing for high strength, with CNC machined threaded ends and bushing housings, and feature a multi-stage black powder coat finish. These lower links are designed specifically for high clearance for reduced contact with trail obstacles and massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Toyota Sequoia | Rear Lower | TRD Pro |
- Also Requires Part Number 55153; May not be compatible with other manufacturer’s 6" lift kits
- The ICON Tubular Rear Upper Link System helps free up rear axle movement to allow for increased suspension travel and articulation. Formed using DOM steel tubing for high strength, with CNC machined threaded ends and bushing housings.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 TUBULAR REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Powdercoated
- Control Arm Material: Dom Steel
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- Adjustable for various lift heights & driveline angles
- Help free rear suspension bind compared to OE links
- CNC machined & notched 1026 DOM steel construction with semi-gloss black powder coat finish
- Multi durometer bushings for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Fabricated components covered under ICON's Limited Lifetime Warranty
- The ICON Tubular Rear Upper Link System helps free up rear axle movement on the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and the 2024 Lexus GX550 to allow for increased suspension travel and articulation. Formed using 1 ¾” x .313 wall DOM Tubing for high strength, with CNC machined threaded ends and bushing housings, and feature a multi-stage black powder coat finish. These upper links are designed with massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Toyota Sequoia | Rear Upper | TRD Pro |
- Also Requires Part Number 55164
- This ICON kit features CNC-machined 6061 aluminum sway bar brackets that are required for front lift heights above 2.25” but are recommended for any amount of front lift to minimize sway bar link bind through the suspension’s travel range.
- 22-24 TUNDRA/23-24 SEQUOIA SWAY BAR DROP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Material: Aluminum
- California Prop 65 Warning: Yes
-
Features:
- Mounts front sway bar slightly lower on vehicle frame
- Reduces bind in OE sway bar links
- CNC machined 6061 aluminum drop brackets
- Black anodized finish for excellent corrosion resistance
- 100% Bolt-on - no cutting or welding necessary for installation
- Includes mounting hardware
- The 2022-2024 Toyota Tundra/2023-2024 Sequoia Sway Bar Drop kit features CNC machined 6061 aluminum sway bar brackets that drop the truck’s sway bar slightly lower on the frame in order to reduce bind in the OE sway bar links. These sway bar drop brackets are required for front lift heights above 2.25” over stock but are recommended for any amount of front lift to minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without over stressing any OE components.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Toyota Sequoia | Front | TRD Pro |
- with 1 (in) Maximum Lift Rear with TRD Off Road Package
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 22-24 TUNDRA 0-1.5"/23-24 SEQUOIA 0-3" REAR 2.0 VS RR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts: 202003 - 2.0 Remote Resi Rebuild Kit
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: Yes
- External Reservoir: Yes
- Remote Reservoir: Yes
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 3
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- Fully rebuildable and re-tunable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are fully rebuildable and re-tunable. For those using their vehicle in extreme off-road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2024 - Toyota Sequoia | Rear | Platinum | 4WD |
- with 3 (in) Maximum Lift Rear without TRD Off Road Package
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 22-24 TUNDRA 0-1.5"/23-24 SEQUOIA 0-3" REAR 2.0 VS RR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts: 202003 - 2.0 Remote Resi Rebuild Kit
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: Yes
- External Reservoir: Yes
- Remote Reservoir: Yes
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 3
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- Fully rebuildable and re-tunable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are fully rebuildable and re-tunable. For those using their vehicle in extreme off-road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2024 - Toyota Sequoia | Rear | Platinum | 4WD |
- Also Requires Part Number 55153; May not be compatible with other manufacturer’s 6" lift kits
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 BILLET REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Anodized
- Control Arm Material: Aluminum
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Gray
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Aluminum
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Billet
- Reinforced: Yes
-
Features:
- Vehicle specific design
- On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON’s billet aluminum rear upper link arms for the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and 2024 Lexus GX550 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Toyota Sequoia | Rear Upper | TRD Pro |
- without Auto-Leveling Headlights; May not be compatible with other manufacturer’s 6" lift kits
- The ICON Tubular Rear Upper Link System helps free up rear axle movement to allow for increased suspension travel and articulation. Formed using DOM steel tubing for high strength, with CNC machined threaded ends and bushing housings.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 TUBULAR REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Powdercoated
- Control Arm Material: Dom Steel
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- Adjustable for various lift heights & driveline angles
- Help free rear suspension bind compared to OE links
- CNC machined & notched 1026 DOM steel construction with semi-gloss black powder coat finish
- Multi durometer bushings for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Fabricated components covered under ICON's Limited Lifetime Warranty
- The ICON Tubular Rear Upper Link System helps free up rear axle movement on the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and the 2024 Lexus GX550 to allow for increased suspension travel and articulation. Formed using 1 ¾” x .313 wall DOM Tubing for high strength, with CNC machined threaded ends and bushing housings, and feature a multi-stage black powder coat finish. These upper links are designed with massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Toyota Sequoia | Rear Upper | Limited |
- May not be compatible with other manufacturer’s 6" lift kits
- The ICON Tubular Rear Upper Link System helps free up rear axle movement to allow for increased suspension travel and articulation. Formed using DOM steel tubing for high strength, with CNC machined threaded ends and bushing housings.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 TUBULAR REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Powdercoated
- Control Arm Material: Dom Steel
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- Adjustable for various lift heights & driveline angles
- Help free rear suspension bind compared to OE links
- CNC machined & notched 1026 DOM steel construction with semi-gloss black powder coat finish
- Multi durometer bushings for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Fabricated components covered under ICON's Limited Lifetime Warranty
- The ICON Tubular Rear Upper Link System helps free up rear axle movement on the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and the 2024 Lexus GX550 to allow for increased suspension travel and articulation. Formed using 1 ¾” x .313 wall DOM Tubing for high strength, with CNC machined threaded ends and bushing housings, and feature a multi-stage black powder coat finish. These upper links are designed with massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Toyota Sequoia | Rear Upper | SR5 |
- with TRD Off Road Package with ICON Front Sway Bar Drop Bracket Kit, Part Number 55154
- The ICON Vehicle Dynamics TRD Aluminum Skid Plate Spacer Kit for the 2022-2024 Toyota Tundra and 2023-2024 Toyota Sequia slightly lowers the skid plate that is part of the TRD Off Road Package and TRD Pro.
- 22-24 TUNDRA/23-24 SEQUOIA ALUMINUM SKID PLATE SPACER KIT
- Product Attributes:
- Mounting Hardware Included: Yes
- Material: Steel
- California Prop 65 Warning: Yes
- Finish: Zinc Plated
-
Features:
- Lowers TRD skid plate to ensure clearance with ICON Sway Bar Drop Brackets
- CNC machined and zinc plated steel sleeves
- Grade 8 mounting hardware included
- Simple, bolt-on installation
- The ICON Vehicle Dynamics TRD Aluminum Skid Plate Spacer Kit for the 2022-2024 Toyota Tundra and 2023-2024 Toyota Sequoia slightly lowers the skid plate that is part of the TRD Off Road Package available on certain submodels and standard on the TRD Pro. This kit is typically installed in conjunction with ICON’s Front Sway Bar Drop Bracket Kit, which may cause clearance issues between the sway bar and the TRD skid plate at certain points in the suspension travel. Installing this spacer kit and lowering the TRD skid plate slightly ensures adequate clearance between these components for full, bind free suspension travel as well as complete functionality of the skid plate. Featuring precision CNC machined steel spacers and grade 8 hardware, this easy to install kit is a must for any ICON suspension system installed on a Tundra or Sequoia equipped with a TRD skid plate.
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2024 - Toyota Sequoia | Platinum | 4WD |
Showing 1 - 10 of 102 products
Loading...