Image
Product
Price
- Polished SP Short Ram Cold Air Intake System
- SP Short Ram Cold Air Intake System, Part No. SP2081P, 2019-2021 Toyota Corolla L4-2.0L.
- Injen SP Short Ram Cold Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Polished
- TQ Gain: 8
- Heat Shield Included: No
- Black Hydroshield (Optional): 1033blk
- Filter Color: Blue
- Replacement Filter Part Number: X-1014-bb
- Compatible Throttle Controller: Pt0014b
- Red Hydroshield (Optional): 1033red
- Prop 65 (C, R or CR): Cr
- HP Gain: 10
-
Features:
- Dyno Proven gains of up to 10 hp and 8 lb-ft. of torque
- Short Ram Cold Air Intake Design
- Provides power gains while maintaining A/F ratios
- No additional tuning required
- 6061-T6 aluminum intake tubing
- Includes custom heat shield specifically designed for this application
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1014-BB
- Optional hydroshield part number 1033BLK or 1033RED
- Available in multiple finishes
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona, California USA
- Injen Technology Limited Lifetime Warranty
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Additionally, the SP2081 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Toyota Corolla | L | 1987 | 4 Cyl 2.0L | 121 |
- EVOLUTION Cold Air Intake System
- EVOLUTION Cold Air Intake System, Part No. EVO5006, 2018-2021 Jeep Wrangler JL L4-2.0L.
- Injen EVOLUTION Cold Air Intake System
- Product Attributes:
- Tube Material: Rotomolded Xlpe
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Supernano-web Dry
- Intake Color: Black
- TQ Gain: 12
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1108-bb
- Compatible Throttle Controller: Pt0010b
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 9
-
Features:
- One of a kind modular system that adapts our snorkel (sold separately - EVO15168)
- Dyno Proven gains of up to 9 hp and 12 lb-ft. of torque
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Durable Roto-Molded Polyethylene housing and intake tube
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Also available with an oiled Air Filter ? Intake system P/N EVO5006C
- Replacement air filter part number X-1108-BB
- Stainless steel band clamps with inner protective liner
- Aggressive under hood appearance while maintaining an OE fit
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- SuperNano-Web Dry Air Filter; The Injen SuperNano-Web Dry air filter is included with the EVO5006 cold air intake. This filter is uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our technicians to use the largest filter available for this application, which enhances the air volume - resulting in increased power gains while making this installation process quick and easy. , , Quality Hardware; From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation; Keep it simple! Every Injen Evolution Cold Air intake that uses our Twist-Lock System has been strategically designed to utilize fewer parts and tools to provide the end user with one of the swiftest and most manageable installations available on the market today. Dyno Proven; Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO5006 clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 9 additional horsepower and 12 Lbs-Ft.of torque, Injen is proud to say that the EVO5006 Evolution Cold Air Intake system is the very best intake system for your Jeep Wrangler JL that money can buy.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2021 - Jeep Wrangler | L | 1997 | 4 Cyl 2.0L | Turbocharged | 122 |
- Wrinkle Black SP Short Ram Air Intake System
- Black with Wrinkle Finish
- SP Short Ram Air Intake System, Part No. SP1350WB, 2018-2023 KIA Stinger V6-3.3L Twin Turbo.
- Injen SP Short Ram Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Wrinkle Black
- TQ Gain: 18
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1078-bb
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 21
-
Features:
- Dyno Proven gains of up to 21 hp and 18 lb-ft. of torque
- Short Ram Air Intake Design
- Stepped from 3.00in to 2.50in to 2.25in 6061-T6 aluminum intake tubing
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- No additional tuning required
- Dual 6061-T6 aluminum intake tubing
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1078-BB
- Optional hydroshield part number 1120BLK
- Available in three amazing finishes: SP1350WB (Wrinkle Black), SP1350WR (Wrinkle Red), and SP1350P (Polished Finish)
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you will enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You are in luck, as Injen also offers this intake system in three amazing finishes, SP1350WB (Wrinkle Black), SP1350WR (Wrinkle Red), and SP1350P (Polished Finish). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2021 - Kia Stinger | V | 3342 | 6 Cyl 3.3L | Turbocharged | - |
- Wrinke Red SP Short Ram Air Intake System
- Red with Wrinkle Finish
- SP Short Ram Air Intake System, Part No. SP1350WR, 2018-2023 KIA Stinger V6-3.3L Twin Turbo.
- Injen SP Short Ram Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Wrinkle Red
- TQ Gain: 18
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1078-bb
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 21
-
Features:
- Dyno Proven gains of up to 21 hp and 18 lb-ft. of torque
- Short Ram Air Intake Design
- Stepped from 3.00in to 2.50in to 2.25in 6061-T6 aluminum intake tubing
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- No additional tuning required
- Dual 6061-T6 aluminum intake tubing
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1078-BB
- Optional hydroshield part number 1120BLK
- Available in three amazing finishes: SP1350WB (Wrinkle Black), SP1350WR (Wrinkle Red), and SP1350P (Polished Finish)
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- The OE intake tract is very restrictive from the factory and limiting power output by choking the turbo. Our new SP1350 dual ram horn cold air intake opens that intake tract with large, stepped aluminum intake tubes that allows that turbo and engine to breathe deep, while keeping intake velocity up to produce the power that you have been craving.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2021 - Kia Stinger | V | 3342 | 6 Cyl 3.3L | Turbocharged | - |
- Black SP Short Ram Cold Air Intake System
- SP Short Ram Cold Air Intake System, Part No. SP2081BLK, 2019-2021 Toyota Corolla L4-2.0L.
- Injen SP Short Ram Cold Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Black
- TQ Gain: 8
- Heat Shield Included: No
- Black Hydroshield (Optional): 1033blk
- Filter Color: Blue
- Replacement Filter Part Number: X-1014-bb
- Compatible Throttle Controller: Pt0014b
- Red Hydroshield (Optional): 1033red
- Prop 65 (C, R or CR): Cr
- HP Gain: 10
-
Features:
- Dyno Proven gains of up to 10 hp and 8 lb-ft. of torque
- Short Ram Cold Air Intake Design
- Provides power gains while maintaining A/F ratios
- No additional tuning required
- 6061-T6 aluminum intake tubing
- Includes custom heat shield specifically designed for this application
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1014-BB
- Optional hydroshield part number 1033BLK or 1033RED
- Available in multiple finishes
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona, California USA
- Injen Technology Limited Lifetime Warranty
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Additionally, the SP2081 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Toyota Corolla | L | 1987 | 4 Cyl 2.0L | 121 |
- Polished SP Short Ram Air Intake System
- SP Aluminum Series Short Ram Air Intake System, Part No. SP2301P, 2021-2023 Toyota GR Supra L4-2.0L Turbo, 2019-2023 BMW Z4 L4-2.0L Turbo
- Injen SP Short Ram Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Polished
- TQ Gain: 9
- Heat Shield Included: Yes
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1059-bb
- Compatible Throttle Controller: Pt0008b
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 10
-
Features:
- Dyno Proven gains of up to 10 hp and 9 lb.-ft. of torque
- Aggressive engine tone under full throttle
- Provides power gains while maintaining A/F ratios: no additional tuning required
- Massive 3.25" 6061-T6 aluminum intake tubing
- Smooth intake piping eliminates restrictions and improves airflow
- Includes custom heat shield specifically designed for this application
- Aggressive under hood appearance while maintaining an OE fit
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter # X-1059-BB
- Available in Polished (SP2301P), Wrinkle Black (SP2301WB), and Wrinkle Red (SP2301WR)
- Optional X-Pedal Throttle Response Controller P/N# PT0008B
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you'll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in amazing finishes, SP2301P (Polished), SP2301WB (Wrinkle Black), and finally SP2301WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2021 - BMW Z4 | L | 1998 | 4 Cyl 2.0L | Turbocharged | 122 |
- Polished PF Cold Air Intake System
- Does NOT fit hybrid models
- PF Cold Air Intake System, Part No. PF9015P, 2015-2023 Ford F-150 V6-2.7L Twin Turbo, 2015-2023 Ford F-150 V6-3.5L Twin Turbo, 2017-2023 Ford F-150 Raptor V6-3.5L Twin Turbo.
- Injen PF Cold Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Polished
- TQ Gain: 24
- Heat Shield Included: Yes
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1078-bb
- Compatible Throttle Controller: Pt0013b
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 11
-
Features:
- Fully serviceable Injen SuperNano-Web dry air filter
- This intake uses two (2) different air filters per kit.
- 1ea) X-1078-BB
- 1ea) X-1079-BB
- Optional hydroshield part numbers -
- 1ea) 1120BLK fits the X-1078-BB Air Filter
- 1ea) 1121BLK fits the X-1079-BB Air Filter
- Available with multiple finish options (select applications)
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Does NOT fit hybrid equipped models
- Dyno Proven gains of up to 11 hp and 24 lb-ft. of torque
- Provides power gains while maintaining A/F ratios with no additional tuning
- 6061-T6 aluminum intake tubing
- Includes custom heat shield specifically designed for this application
- Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen's cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2021 - Ford F-150 | V | - | 6 Cyl 2.7L | Turbocharged | 164 |
- Wrinkle Black PF Cold Air Intake System
- Does NOT fit hybrid models
- PF Cold Air Intake System, Part No. PF9015WB, 2015-2023 Ford F-150 V6-2.7L Twin Turbo, 2015-2023 Ford F-150 V6-3.5L Twin Turbo, 2017-2023 Ford F-150 Raptor V6-3.5L Twin Turbo.
- Injen PF Cold Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Wrinkle Black
- TQ Gain: 24
- Heat Shield Included: Yes
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1078-bb
- Compatible Throttle Controller: Pt0013b
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 11
-
Features:
- Does NOT fit hybrid equipped models
- Dyno Proven gains of up to 11 hp and 24 lb-ft. of torque
- Provides power gains while maintaining A/F ratios with no additional tuning
- 6061-T6 aluminum intake tubing
- Includes custom heat shield specifically designed for this application
- Fully serviceable Injen SuperNano-Web dry air filter
- This intake uses two (2) different air filters per kit.
- 1ea) X-1078-BB
- 1ea) X-1079-BB
- Optional hydroshield part numbers -
- 1ea) 1120BLK fits the X-1078-BB Air Filter
- 1ea) 1121BLK fits the X-1079-BB Air Filter
- Available with multiple finish options (select applications)
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen's cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2021 - Ford F-150 | V | - | 6 Cyl 2.7L | Turbocharged | 164 |
Showing 1 - 8 of 8 products
Loading...