Image
Product
Price
- Wrinkle Black SP Short Ram Air Intake System
- Black with Wrinkle Finish
- SP Short Ram Air Intake System, Part No. SP1350WB, 2018-2023 KIA Stinger V6-3.3L Twin Turbo.
- Injen SP Short Ram Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Wrinkle Black
- TQ Gain: 18
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1078-bb
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 21
-
Features:
- Dyno Proven gains of up to 21 hp and 18 lb-ft. of torque
- Short Ram Air Intake Design
- Stepped from 3.00in to 2.50in to 2.25in 6061-T6 aluminum intake tubing
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- No additional tuning required
- Dual 6061-T6 aluminum intake tubing
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1078-BB
- Optional hydroshield part number 1120BLK
- Available in three amazing finishes: SP1350WB (Wrinkle Black), SP1350WR (Wrinkle Red), and SP1350P (Polished Finish)
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you will enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You are in luck, as Injen also offers this intake system in three amazing finishes, SP1350WB (Wrinkle Black), SP1350WR (Wrinkle Red), and SP1350P (Polished Finish). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2023 - Kia Stinger | V | 3342 | 6 Cyl 3.3L | Turbocharged | - |
- Polished SP Short Ram Air Intake System
- SP Aluminum Series Short Ram Air Intake System, Part No. SP2301P, 2021-2023 Toyota GR Supra L4-2.0L Turbo, 2019-2023 BMW Z4 L4-2.0L Turbo
- Injen SP Short Ram Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Polished
- Heat Shield Included: Yes
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1059-bb
- Compatible Throttle Controller: Pt0008b
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
-
Features:
- Dyno Proven gains of up to 10 hp and 9 lb.-ft. of torque
- Aggressive engine tone under full throttle
- Provides power gains while maintaining A/F ratios: no additional tuning required
- Massive 3.25" 6061-T6 aluminum intake tubing
- Smooth intake piping eliminates restrictions and improves airflow
- Includes custom heat shield specifically designed for this application
- Aggressive under hood appearance while maintaining an OE fit
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter # X-1059-BB
- Available in Polished (SP2301P), Wrinkle Black (SP2301WB), and Wrinkle Red (SP2301WR)
- Optional X-Pedal Throttle Response Controller P/N# PT0008B
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you'll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in amazing finishes, SP2301P (Polished), SP2301WB (Wrinkle Black), and finally SP2301WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2023 - BMW Z4 | L | 1998 | 4 Cyl 2.0L | Turbocharged | 122 |
- Wrinke Red SP Short Ram Air Intake System
- Red with Wrinkle Finish
- SP Short Ram Air Intake System, Part No. SP1350WR, 2018-2023 KIA Stinger V6-3.3L Twin Turbo.
- Injen SP Short Ram Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Wrinkle Red
- TQ Gain: 18
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1078-bb
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 21
-
Features:
- Dyno Proven gains of up to 21 hp and 18 lb-ft. of torque
- Short Ram Air Intake Design
- Stepped from 3.00in to 2.50in to 2.25in 6061-T6 aluminum intake tubing
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- No additional tuning required
- Dual 6061-T6 aluminum intake tubing
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1078-BB
- Optional hydroshield part number 1120BLK
- Available in three amazing finishes: SP1350WB (Wrinkle Black), SP1350WR (Wrinkle Red), and SP1350P (Polished Finish)
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- The OE intake tract is very restrictive from the factory and limiting power output by choking the turbo. Our new SP1350 dual ram horn cold air intake opens that intake tract with large, stepped aluminum intake tubes that allows that turbo and engine to breathe deep, while keeping intake velocity up to produce the power that you have been craving.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2023 - Kia Stinger | V | 3342 | 6 Cyl 3.3L | Turbocharged | - |
- Wrinkle Black SP Short Ram Air Intake System
- Polished Finish
- SP Short Ram Air Intake System, Part No. SP1350WB, 2018-2023 KIA Stinger V6-3.3L Twin Turbo.
- Injen SP Short Ram Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Polished
- TQ Gain: 18
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1078-bb
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 21
-
Features:
- Dyno Proven gains of up to 21 hp and 18 lb-ft. of torque
- Short Ram Air Intake Design
- Stepped from 3.00in to 2.50in to 2.25in 6061-T6 aluminum intake tubing
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- No additional tuning required
- Dual 6061-T6 aluminum intake tubing
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1078-BB
- Optional hydroshield part number 1120BLK
- Available in three amazing finishes: SP1350WB (Wrinkle Black), SP1350WR (Wrinkle Red), and SP1350P (Polished Finish)
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- The OE intake tract is very restrictive from the factory and limiting power output by choking the turbo. Our new SP1350 dual ram horn cold air intake opens that intake tract with large, stepped aluminum intake tubes that allows that turbo and engine to breathe deep, while keeping intake velocity up to produce the power that you have been craving.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2023 - Kia Stinger | V | 3342 | 6 Cyl 3.3L | Turbocharged | - |
- Polished SP Aluminum Series Air Intake System
- SP Aluminum Series Cold Air Intake System, Part No. SP1586P, 2022-2024 Honda Civic/Civic Si L4-1.5L (t), 2023-2024 Acura Integra L4-1.5L (t)
- Injen SP Cold Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Filter Media: Dry Supernano-web
- Intake Color: Polished
- TQ Gain: Base: 11 / Si/integra: 9
- Heat Shield Included: No
- Black Hydroshield (Optional): 1033blk
- Patented Air Fusion Incorporated: Yes
- Filter Color: Blue
- Replacement Filter Part Number: X-1014-bb
- Compatible Throttle Controller: Pt0018b
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): 1033red
- Prop 65 (C, R or CR): Cr
- HP Gain: Base: 10 / Si/integra: 10
-
Features:
- Dyno Proven gains for each Civic model:
- Base Civic ? 10 hp and 11 lb-ft. of torque
- Civic Si/Integra - 10 hp and 9 lb-ft. of torque
- True Cold Air Intake Design
- Manufactured from 2.50in and 3.00in Mandrel-Bent 6061-T6 aluminum intake tubing
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- No additional and expensive tuning required
- Smooth intake piping eliminates restrictions and improves airflow
- Aggressive engine tone under full throttle
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1014-BB
- Optional Hydroshield part number 1033BLK or 1033RED
- Available in multiple finishes
- SP1586P (Polished)
- SP1586WB (Wrinkle Black)
- SP1586WR (Wrinkle Red)
- Injen Front Mount intercooler coming soon: FM1586i
- Injen Charge Pipes: SES1586ICP
- Injen X-Pedal Throttle Response Controller: PT0018
- Proudly made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you'll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in amazing finishes, SP1586P (Polished), SP1586WB (Wrinkle Black), and finally SP1586WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2023 - Acura Integra | L | 1497 | 4 Cyl 1.5L | Turbocharged | - |
- Polished PF Cold Air Intake System
- Does NOT fit hybrid models
- PF Cold Air Intake System, Part No. PF9015P, 2015-2023 Ford F-150 V6-2.7L Twin Turbo, 2015-2023 Ford F-150 V6-3.5L Twin Turbo, 2017-2023 Ford F-150 Raptor V6-3.5L Twin Turbo.
- Injen PF Cold Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Polished
- TQ Gain: 24
- Heat Shield Included: Yes
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1078-bb
- Compatible Throttle Controller: Pt0013b
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 11
-
Features:
- Fully serviceable Injen SuperNano-Web dry air filter
- This intake uses two (2) different air filters per kit.
- 1ea) X-1078-BB
- 1ea) X-1079-BB
- Optional hydroshield part numbers -
- 1ea) 1120BLK fits the X-1078-BB Air Filter
- 1ea) 1121BLK fits the X-1079-BB Air Filter
- Available with multiple finish options (select applications)
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Does NOT fit hybrid equipped models
- Dyno Proven gains of up to 11 hp and 24 lb-ft. of torque
- Provides power gains while maintaining A/F ratios with no additional tuning
- 6061-T6 aluminum intake tubing
- Includes custom heat shield specifically designed for this application
- Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen's cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2023 - Ford F-150 | V | 3496 | 6 Cyl 3.5L | Turbocharged | 213 |
- Wrinkle Black PF Cold Air Intake System
- Does NOT fit hybrid models
- PF Cold Air Intake System, Part No. PF9015WB, 2015-2023 Ford F-150 V6-2.7L Twin Turbo, 2015-2023 Ford F-150 V6-3.5L Twin Turbo, 2017-2023 Ford F-150 Raptor V6-3.5L Twin Turbo.
- Injen PF Cold Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Dry Supernano-web
- Intake Color: Wrinkle Black
- TQ Gain: 24
- Heat Shield Included: Yes
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1078-bb
- Compatible Throttle Controller: Pt0013b
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 11
-
Features:
- Does NOT fit hybrid equipped models
- Dyno Proven gains of up to 11 hp and 24 lb-ft. of torque
- Provides power gains while maintaining A/F ratios with no additional tuning
- 6061-T6 aluminum intake tubing
- Includes custom heat shield specifically designed for this application
- Fully serviceable Injen SuperNano-Web dry air filter
- This intake uses two (2) different air filters per kit.
- 1ea) X-1078-BB
- 1ea) X-1079-BB
- Optional hydroshield part numbers -
- 1ea) 1120BLK fits the X-1078-BB Air Filter
- 1ea) 1121BLK fits the X-1079-BB Air Filter
- Available with multiple finish options (select applications)
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen's cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2023 - Ford F-150 | V | 3496 | 6 Cyl 3.5L | Raptor | Turbocharged | 213 |
Showing 1 - 7 of 7 products
Loading...