Image
Product
Price
- ACOS Front Adjustable Coil Spacer
- MJ Comanche: Installation may require minor vehicle modifications. Wrangler TJ: Compatible with Rubicon and Unlimited models. XJ Cherokee: Installation may require minor vehicle modifications.
- Ride height adjustment has never been easier than with the Adjustable Coil Over Spacer (ACOS) for Jeep JT/XJ/ZJ. Whether you are adding clearance for larger tires, compensating for heavy accessories, or level out the vehicle at either corner, these fine threaded adjustable spacers provide convenient control of ride height without removing any suspension components. Front ride height can be adjusted safely between 1-3.5" and ACOS provides built-in bump stop extensions.
- In the box: ACOS Adjustable Coil Spring Spacers
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Installation Time: 2-3
- Diameter: N/a
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Title: Acos Front Adjustable Coil Spacer
- Height: 1-1/2" - 3-3/4"
-
Features:
- Variable length coil spring spacer allows convenient ride height adjustments without removing any suspension components
- Adjustable lift height from 1-1/2" to 3-3/4
- Compensates for uneven load distribution, spring settling, and sagging
- Instantly increases vehicle ride height upon installation for immediate benefits
- Eliminates need to replace coil springs to accommodate future modifications
- Technically advanced design and billet construction dramatically enhances suspension appearance
- New Dura-Thane isolators utilized to prevent noise transfer, and bump stops for durability
- Dial in ride height on your Jeep Wrangler TJ or LJ with JKS ACOS adjustable front coil spring spacers. The range of ride height adjustment is from 1-1/2" to 3-3/4" -- without taking apart suspension components. ACOS adjustable coil spring spacers compensate for uneven load distribution and spring settling. They can save you from having to replace coil springs as you add equipment weight. The high-tech, billet design looks great, too. Dura-Thane isolators prevent noise transfer.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Jeep Grand Cherokee (ZJ) |
- Quicker Disconnect Sway Bar Links
- Not compatible with aftermarket sway bars Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel 4-6" Lift
- Quicker Disconnect Sway Bar Links | 2.5"-6.0" Lift | Wrangler TJ, Cherokee XJ, Comanche MJ & Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- Installation Time: 1-2
- Installation Difficulty: Moderately Easy
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
- Installation Tools Requirements: 15/16" X 18tpi Tap; Angle Measuring Tool; Grease Gun With Zerk Fitting Coupler; Tie Rod End Separator (recommended); Torque Wrench; Wheel Bearing Grease
-
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 1997 - Jeep Cherokee | United States |
- Quicker Disconnect Sway Bar Links
- Not compatible with aftermarket sway bars Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel 2.5-6" Lift
- Quicker Disconnect Sway Bar Links | 2.5"-6.0" Lift | Wrangler TJ, Cherokee XJ, Comanche MJ & Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- Installation Time: 1-2
- Installation Difficulty: Moderately Easy
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
- Installation Tools Requirements: 15/16" X 18tpi Tap; Angle Measuring Tool; Grease Gun With Zerk Fitting Coupler; Tie Rod End Separator (recommended); Torque Wrench; Wheel Bearing Grease
-
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 1997 - Jeep Wrangler | United States |
- Adjustable Front Track Bar
- Not compatible with right hand drive vehicles 1-3.5" Lift Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference
- Adjustable Front Track Bar | 1"-3.5" Lift | Wrangler TJ & LJ, Cherokee XJ, Comanche MJ, Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 30.20
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 33.20
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 32.00
-
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 1997 - Jeep Cherokee | Front | United States |
- Adjustable Front Track Bar
- Suggested Starting Length - 32" Min. Adjusted Length - 30.2" Max Adjusted Length - 33.2" *See Instructions for further details. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference. Not compatible with right hand drive vehicles.
- Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
- In the box: Bushings Jam Nut Track Bar
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 30.20
- For Use With Lift Heights: 1-3.5"
- Installation Time: 2-3
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Maximum Adjusted Length: 33.20
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 32.00
-
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Jeep Wrangler TJ |
- Quicker Disconnect Sway Bar Links
- Min. Adjusted Length - 8" Max Adjusted Length - 11.625" *See Instructions for further details. Not compatible with aftermarket sway bars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs. JKS Quicker Disconnect sway bar end links fits various models and lift heights. See list below
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- For Use With Lift Heights: 2.5"-6"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderately Easy
- Is Adjustable: Yes
- Length: 8 To 11-5/8
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
- Installation Tools Requirements: 15/16" X 18tpi Tap; Angle Measuring Tool; Grease Gun With Zerk Fitting Coupler; Tie Rod End Separator (recommended); Torque Wrench; Wheel Bearing Grease
-
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Jeep Wrangler TJ |
- Adjustable Rear Track Bar
- Not compatible with right hand drive vehicles 0-6" Lift For vehicles equipped with CV-type driveshaft order
- Adjustable Rear Track Bar | Wrangler TJ and LJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 31.30
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 34.30
- Title: Adjustable Rear Track Bar
- Suggested Starting Length: 32.75
- Installation Tools Requirements: 1-1/2” Open-end Wrench; Anti-seize Lubricant; Heavy Duty Ratchet Strap; Hydraulic Floor Jack And Jack Stands; Metric/standard Socket Wrench Set; T55 Torx Driver (for Oe Track Bar Bolt); Tape Measure; Torque Wrench; Wheel Bearing Grease
-
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and high performance urethane for steering responsiveness
- Zinc plated and powder coated for protection from corrosion and debris
- Install a new adjustable rear track bar on your Jeep Wrangler TJ or LJ to properly align and control lateral axle movement left to right. The heavy duty track bar can be adjusted to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, 1.25" Diameter; 0.25" wall thickness DOM CNC-bent tubing and powder coated and zinc finish. Features a spherical urethane bushing at one end for unrestricted travel, and high performance urethane bushing at the other end for steering responsiveness. Fits up to 6" lift. Bolt-on installation.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 1997 - Jeep Wrangler | Rear | United States |
- Budget Motor Mount Lift
- Compatible with 4.2L, 4.0L or 2.5L engine only
- Budget Motor Mount Lift | Wrangler YJ / TJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Budget Motor Mount Lift
-
Features:
- Simple, unique 1 in. spacer raises OE front motor mounts on chassis
- Improves rear driveline angles by tilting transfer case output shaft towards the rear axle
- Re-aligns engine fan with radiator shroud for maximum cooling efficiency
- Provides the benefits of raised motor mounts while retaining the soft OE rubber bushings for maximum vibration absorption
- Machined from a solid block of premium T061-T6 aluminum alloy and anodized to prevent oxidation
- Easily installed, bolt-on kit includes zinc-plated hardware for corrosion resistance
- Compatible with 4.0L, 4.2L and 2.5L engines
- The right way to install a body lift on your Jeep Wrangler YJ is with a JKS budget motor mount lift kit. Simple, 1 in. spacers raise OE front motor mounts on chassis. Improves rear driveline angle by tilting transfer case output shaft towards the rear axle. Re-aligns engine fan with radiator shroud for proper cooling efficiency. Retains OE rubber bushings for vibration absorption. Machined from solid premium T6061-T6 aluminum and anodized to prevent oxidation. The complete, bolt-on kit includes zinc-plated hardware. Compatible with 4.0L, 4.2L and 2.5L engines.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 1997 - Jeep Wrangler | United States |
- Rear Adjustable Sway Bar Links
- Min. Adjusted Length - 8.75" Max Adjusted Length - 15" *See Instructions for further details. Requires Front 2.5" to 6" of Lift. Not compatible with aftermarket swaybars. Although rare, some TJs with 4-6" of lift may require additional part # OGS915 for proper sway bar operating angle.
- Adjustable rear sway bar end links for Jeep Wrangler TJ and LJ with 2.5" to 6" lift. Highly responsive bushings reduce deflection for improved handling. Adjustable length allows you to set sway bar operating angle. Zinc plated for corrosion resistance. Not compatible with aftermarket sway bars. Sold in pairs.
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- For Use With Lift Heights: 2.5"-6"
- Installation Time: 1-3
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Length: 7 To 10-1/2
- Maximum Adjusted Length: 15.00
- Title: Rear Adjustable Sway Bar Links
-
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Highly responsive bushings reduce loss of motion between chassis and suspension for improved handling
- Prevents sway bar from contacting axle housing at full suspension droop
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
- Adjustable rear sway bar end links for Jeep Wrangler TJ and LJ with 2.5" to 6" lift. Highly responsive bushings reduce deflection for improved handling. Adjustable length allows you to set sway bar operating angle. Zinc plated for corrosion resistance. Not compatible with aftermarket sway bars. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Jeep Wrangler TJ |
- Quicker Disconnect Sway Bar Links
- Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel. Not compatible with aftermarket sway bars.
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- For Use With Lift Heights: 0-4"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Length: 6-5/8 To 9-3/8
- Title: Quicker Disconnect Sway Bar Links
-
Features:
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Jeep Wrangler TJ |
Showing 1 - 10 of 22 products
Loading...