Image
Product
Price
- Adjustable Rear Sway Bar End Links
- Not compatible with aftermarket sway bars Requires Front 3" to 6" of Lift Rear 0" to 6" of Lift Front installation requires drilling
- Adjustable Rear Sway Bar End Links | Wrangler JK and JL
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- Installation Time: 1-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 15.00
- Title: Adjustable Rear Sway Bar End Links
-
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Maintain proper balance between front and rear sway bars for safer, more predictable on-road driving
- Tension-free rod ends offer 45 degrees of mounting alignment for reduced wear on related components
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
- Also fits Wrangler JK right hand drive models
- Retain the handling of your Jeep Wrangler JK with rear adjustable sway bar links to retain proper sway geometry after lifting your Jeep. The adjustable rear sway bar end links allow for proper use of the rear sway bar and improve handling on and off road. A common misconception among Jeep owners is that the rear sway bar is unnecessary off-road and should be removed. This is not true however, as the rear sway bar is small and flexible enough to allow plenty of suspension articulation.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Jeep Wrangler | Rear | Unlimited Rubicon |
- Adjustable Rear Sway Bar End Links
- Not compatible with aftermarket sway bars Requires Front 3" to 6" of Lift Rear 0" to 6" of Lift
- Adjustable Rear Sway Bar End Links | Wrangler JK and JL
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- Installation Time: 1-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 15.00
- Title: Adjustable Rear Sway Bar End Links
-
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Maintain proper balance between front and rear sway bars for safer, more predictable on-road driving
- Tension-free rod ends offer 45 degrees of mounting alignment for reduced wear on related components
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
- Also fits Wrangler JK right hand drive models
- Retain the handling of your Jeep Wrangler JK with rear adjustable sway bar links to retain proper sway geometry after lifting your Jeep. The adjustable rear sway bar end links allow for proper use of the rear sway bar and improve handling on and off road. A common misconception among Jeep owners is that the rear sway bar is unnecessary off-road and should be removed. This is not true however, as the rear sway bar is small and flexible enough to allow plenty of suspension articulation.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Jeep Wrangler | Rear | Sport S |
- JKS Shock Mount Skid/Roost Guard
- Will not fit models with the Hitatchi struts or Coilovers, which include Base, Outer Banks, Big Bend, and Black Diamond trim packages which do NOT have the Sasquatch package upgrade
- Rear Lower Shock Skid/Roost Guard (Bilstein Struts)
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Installation Time: 1
- Installation Difficulty: 2 Out Of 5
- Title: Ford Bronco Rear Lower Shock Skid / Roost Guard
-
Features:
- Constructed from 3/16" steel for extreme strength and durability
- Protects lower strut mount from rock and obstacles while off-road
- Extended roost guard further protects front of strut or coilover from obstacles and debris
- Durable powder coated finish
- Sold as a pair
- Despite the impressive off-road capability of the new Ford Bronco, the position of the rear lower shock make them very susceptible to damage. Add some much need protection with the JKS Rear Lower Shock Skids. These 3/16" steel skids reinforce the factory shock mount and provide ample protection from rocks and other obstacles to the lower shock and mount. The design also featured an integrated roost guard, adding further protection to the shock body from stones or debris you may kick up on the trail. Shipped with a black powder coated finish for excellent durability and corrosion resistance.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2021 - Ford Bronco | Rear | United States | Big Bend |
- JKS Shock Mount Skid/Roost Guard
- Will not fit models with the Bilstein struts which include Badlands, Wildtrak, First Edition, Everglades, and Sasquatch package vehicles
- Rear Lower Shock Skid/Roost Guard (Black Struts/Coilovers)
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Installation Time: 1
- Installation Difficulty: 2 Out Of 5
- Title: Ford Bronco Rear Lower Shock Skid / Roost Guard
-
Features:
- Constructed from 3/16" steel for extreme strength and durability
- Protects lower strut mount from rock and obstacles while off-road
- Extended roost guard further protects front of strut or coilover from obstacles and debris
- Durable powder coated finish
- Sold as a pair
- Despite the impressive off-road capability of the new Ford Bronco, the position of the rear lower shock make them very susceptible to damage. Add some much need protection with the JKS Rear Lower Shock Skids. These 3/16" steel skids reinforce the factory shock mount and provide ample protection from rocks and other obstacles to the lower shock and mount. The design also featured an integrated roost guard, adding further protection to the shock body from stones or debris you may kick up on the trail. Shipped with a black powder coated finish for excellent durability and corrosion resistance.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2021 - Ford Bronco | Rear | United States | Big Bend |
- JSPEC Gas Shock
- 2.5-3.5" Lift
- JSPEC Gas Shock | Rear | 2.5"-3.5" Lift | Wrangler JL
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Jspec Gas Shock
-
Features:
- IFP design eliminates oil aeration
- Valved specifically for JSPEC systems
- Direct bolt-in replacement
- Sold Individually
- Improve the ride quality and handling of your Jeep Wrangler JL with JSPEC 2.5"-3.5" lift rear gas shocks. JKS JSPEC shocks are custom-designed to work in conjunction with a lift kit and oversized tires. The affordable steel-body, twin-tube shocks are specifically tuned to our JKS springs for amazing performance and ride quality. JKS rigorously tests its shocks to develop specifical valving for your model of Jeep -- especially when used as part of a matched JKS suspension system. Improve your driving experience with JKS JSPEC. Direct bolt-on replacement. Rear position. Sold Individually.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2021 - Jeep Wrangler | Rear | United States |
- Tie Rod End Sleeve Kit
- Works with OEM tie rods only, will not work with aftermarket tie rods
- Steering Sleeve Kit
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Installation Time: 1/2-1
- Installation Difficulty: Moderately Easy
- Title: Tie Rod End Sleeve Kit
- Installation Tools Requirements: Basic Hand Tools
-
Features:
- Prevents tie rods from bending when subject to off-road situations
- Increase steering link diameter through the weakest section of the tie rod
- Works for all lift heights when used with the OE inner tie rod end
- Allows full range of OE toe adjustment
- Machined from cold rolled 1215 steel, 1" O.D.
- As capable as these new Broncos are out on the trail, the factory steering tie rod ends have proven to be a weak point when running larger tires, failing at the threaded rod. JKS has the solution with a new sleeve kit designed specifically for the Bronco's factory tie rod ends. This heavy duty sleeve kit reinforces your steering by replacing the OE jam nut with a robust sleeve that supports the tie rod from bending or breaking. Designed to be used on a variety of lift heights, this sleeve kit still allows full tow adjustment to dial in front end alignment. Installation is quick and easy to give you confidence and piece of mind to push your Bronco to the limit out on the trail.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2021 - Ford Bronco | United States |
- Can be installed at any ride height Max tire size dependent on suspension system height Will fit 2022 Bronco HOSS 3.0 model as optional upgrade
- Max Tire Clearance Kit
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Installation Time: 4
- Installation Difficulty: Moderately Easy
- Title: Max Tire Clearance Kit
- Installation Tools Requirements: Basic Hand Tools
-
Features:
- Heavy duty 3/16" steel construction for body mount brackets
- High clearance body mount provides a clean look with mid-width and stubby bumpers
- Allows for larger tire fitment at all ride heights - Max tire size is dependent on lift height
- Full clearance through wheel travel at 2-4" of lift with 37x12.50 tires (17x9 to 20x9 with 4.5-5.5" backspacing recommended)
- JKS builds on the capability of the new Ford Bronco with a new Max Tire Clearance Kit designed to optimize the front wheel-well to install larger tires on your stock height or lifted Bronco models. High strength body mount brackets improve clearance while allowing compatibility with stock and aftermarket "stubby" bumpers.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2021 - Ford Bronco | United States |
Showing 1 - 7 of 7 products
Loading...