2024 Jeep K&N Parts
Choose a Model for your 2024 Jeep
Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; M22x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.060 In. (103mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04892339AA, 05038041AA, 05047769AA, 12640445, 12667194, 12670058, 1651078J00, 19303975, 4115031, 57060, 57073, 68197769AA, 7060, 7073, 729854, 89017524, L12222, M1113...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2024 - Jeep Wrangler | L | 1997 | 4 Cyl 2.0L | Willys | 122 |
- H-0.781 in.; L-7.844 in.; W-4.625 in.; Box of 2
- Helps protect your vehicle s occupants; interior; and HVAC system from pollutants that can cause unpleasant odors. Engineered to be washable; reusable; and durable
- Cabin Air Filter
- Product Attributes:
- Filter Material: Non-woven Synthetic
- Automotive Item Grade: High Performance
- Package Material: Corrugated
- WARNING CA Proposition 65: Yes
- Recommended Replacement Interval: 100000 Miles
- Filter Quantity: 2
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Item Height: 0.781 In. (20mm)
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Package Type: Box
- Prop 65 (C, R or CR): Cr
-
Features:
- Easy To Clean And Reuse
- Freshens And Cleans Incoming Cabin Air
- Helps Controls Odors
- Factory Fit - Pretreated And Ready To Install
- Electrostatically Charged To Hold Dirt And Dust
- 10 Year/1000000 Mile Limited Warranty
- K&N’s line of washable replacement cabin air filters are designed to filter your incoming air using state-of-the-art filtration technology - protecting your vehicle’s occupants, interior, and HVAC system from pollutants and unpleasant odors. Engineered to be washable, reusable, and durable, this cabin filter is designed to last for the entire lifespan of your vehicle!
This Part Fits the Following OEM/Substitute Numbers:
68301863AA
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Jeep Gladiator |
- H-0.938 in.; L-8.563 in.; W-7.719 in.
- Helps protect your vehicle s occupants; interior; and HVAC system from pollutants that can cause unpleasant odors. Engineered to be washable; reusable; and durable
- Cabin Air Filter
- Product Attributes:
- Filter Material: Non-woven Synthetic
- Automotive Item Grade: High Performance
- Package Material: Corrugated
- WARNING CA Proposition 65: Yes
- Recommended Replacement Interval: 100000 Miles
- Filter Quantity: 1
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Item Height: 0.938 In. (24mm)
- Item Weight: 0.700 Lbs. (0.3 Kg)
- Package Type: Box
- Prop 65 (C, R or CR): Cr
-
Features:
- Easy To Clean And Reuse
- Freshens And Cleans Incoming Cabin Air
- Helps Controls Odors
- Factory Fit - Pretreated And Ready To Install
- Electrostatically Charged To Hold Dirt And Dust
- 10 Year/1000000 Mile Limited Warranty
- K&N’s line of washable replacement cabin air filters are designed to filter your incoming air using state-of-the-art filtration technology - protecting your vehicle’s occupants, interior, and HVAC system from pollutants and unpleasant odors. Engineered to be washable, reusable, and durable, this cabin filter is designed to last for the entire lifespan of your vehicle!
This Part Fits the Following OEM/Substitute Numbers:
68406048AA
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Jeep Wagoneer |
- High Flow Premium Media; H-4.078 in.; OD-3 in.; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Jeep Grand Wagoneer |
- Oil Filter
- H-4.78 in.; OD-3.01 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Product Box Height: 5.750 In. (146mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.130 In. (79 Mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 4.781 In. (121mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
19330000, 19330001, 5184231AA, 57045, 57502, 7045, 7502, 84045, 84502, AA5Z6714A, AA5Z6714AA, AA5Z6714AB, B7444, B7449, FL500, FL500S, L22500, LF637...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Jeep Grand Wagoneer L |
- Performance Air Intake System
- Includes Air Filter/Air Box/Tubing; Estimated Horsepower Gain 12.5 HP At 4630 RPM;Not Legal For Sale Or Use In California
- K/N s enclosed air box roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 12.5 Hp @ 4630 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-2815
- Item Weight: 10.400 Lbs. (4.7 Kg)
- RPM: 4630
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Clamp Quantity: 3
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Horse Power Increase: 13 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Corrugated
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: Yes
- Street Legal: No
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and the air box lid allows for quick and easy access to the filter without tools. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design of the filter allows you to go up to 100,000 miles between filter services under normal highway driving conditions. The system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
This Part Fits the Following OEM/Substitute Numbers:
INJEVO5003
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2024 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Unlimited Rubicon X | 220 |
- Round; Red Air Filter; Cotton Gauze; Natural Stainless Steel Clamp; Estimated Horsepower Gain 10.57 HP;Not Legal For Sale Or Use In California
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Air Intake System
- Product Attributes:
- Oil Included: Yes
- Clamp Style: Regular
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Intake Pipe Material: Aluminum
- Replacement Filter: Ru-2800
- Item Weight: 9.200 Lbs. (4.2 Kg)
- Mass Air Flow Sensor Adapter Included : No
- Clamps Included: Yes
- Air Filter Outlet Shape: Round
- Couplers Included: 1
- Package Material: Corrugated
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Clamp Material: Stainless Steel
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Air Box Included: No
-
Features:
- Guaranteed To Increase Horsepower And Torque
- Mandrel-Bent Aluminum Intake Tube Paired
- Oversized Oiled Cotton Air Filter
- Engineered To Provide High Airflow And Exceptional Filtration
- Replaces Factory Air Filter And Intake Tube
- 10-Year/Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2024 - Jeep Grand Cherokee | L | 1997 | 4 Cyl 2.0L | 4xe | 122 |
- Oil Catch Can
- The K/N Air Oil Separator protects the engine and intake tract from blowby by capturing the oil in our industry leading high capacity reservoir.
- Oil Separator
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Prop 65 (C, R or CR): Cr
-
Features:
- Catch Can
- Oil Separator
- The K&N Air Oil Separator protects the engine and intake tract from blowby by capturing the oil in our industry leading high capacity reservoir. This helps prevent power loss and possible engine damage caused by blowby. The K&N Air Oil Separator is quick and easy to install in about 30 minutes with basic tools and uses factory-style hose connections to quickly snap on and off. The oil separator replaces the factory line from the crank case allowing the oil separator to be mounted to a coinvent location in your engine bay. No tools are needed to check and empty the oil collector reservoir. Each unit is engineered specifically for your vehicle and is backed by our No-Hassle Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Jeep Gladiator |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Polished Tubing/Hardware; Estimated Horsepower Gain 8.8 HP At 5400 RPM;Not Legal For Sale Or Use In California
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 77 Series Air Intake System
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 8.8 Hp @ 5400 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-2815
- Item Weight: 10.400 Lbs. (4.7 Kg)
- RPM: 5400
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Clamp Quantity: 5
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Horse Power Increase: 9 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Corrugated
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tubing
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- Easy To Install - Usually in 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
This Part Fits the Following OEM/Substitute Numbers:
INJEVO5003
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2024 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Unlimited Willys | 220 |
- Round; Red Air Filter; Cotton Gauze; Natural Stainless Steel Clamp; Estimated Horsepower Gain 12.17 HP At 4740 RPM;Not Legal For Sale Or Use In California
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Prop 65 (C, R or CR): Cr
-
Features:
- Guaranteed To Increase Horsepower And Torque
- Mandrel-Bent Aluminum Intake Tube Paired
- Oversized Oiled Cotton Air Filter
- Engineered To Provide High Airflow And Exceptional Filtration
- Replaces Factory Air Filter And Intake Tube
- 10-Year/Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2024 - Jeep Grand Cherokee | V | 3604 | 6 Cyl 3.6L | Summit Reserve | 220 |
Showing 1 - 10 of 21 products
Loading...