2000 Chevrolet MSD Parts
Choose a Model for your 2000 Chevrolet
Image
Product
Price
- Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39 CARB E.O. D-40-38~If Replacing A GM HEI- A Blaster SS Coil & Coil Wire Are Required
- Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
- Ready-To-Run Distributor
- Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size:
- Chevy Big Block (396-454)
- Chevy Small Block (262-400)
-
Features:
- Simple and clean three wire installation
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
- Vacuum advance canister for improved economy (can be locked out)
- The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Chevrolet Express 3500 | V | - | 8 Cyl 7.4L | 454 |
- Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39 If Replacing A GM HEI- A Blaster SS Coil and Coil Wire Are Required~CARB E.O. D-40-38
- Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
- Ready-To-Run Distributor
- Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size:
- Chevy Big Block (396-454)
- Chevy Small Block (262-400)
-
Features:
- Simple and clean three wire installation
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
- Vacuum advance canister for improved economy (can be locked out)
- The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Chevrolet Express 3500 | V | - | 8 Cyl 7.4L | 454 |
- Direct Replacement; 5.6 mH Inductance; 44000 Max Voltage; 220 ma Peak Current; 300 uS Spark Duration; 100:1 Turns Ratio; Red; Single;CARB E.O. D-40-37 0.68 ohms Primary Resistance/4.8k ohms Secondary Resistance~GM Dual Connector Coil Use PN[8876] Harness For Direct Plug-in
- GM Dual Connection Ignition Coil; Direct Replacement; 5.6 mH Inductance; 44000 Max Voltage; 220 ma Peak Current; 300 uS Spark Duration; 100:1 Turns Ratio; Red; Single;
- GM Dual Connection Ignition Coil
- Product Attributes:
- Spark Duration: 300 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 100:1
- Inductance: 5.6 Mh
- Maximum Voltage: 44000
- Peak Current: 220 Ma
- Primary Resistance: .680 Ohms
- Secondary Resistance: 4.8k Ohms
-
Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory-style housings! MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks. The MSD Blaster GM Coil is designed to produce increased voltage and energy over the stock GM Coil. To get even more ignition performance, install an MSD Ignition Control with a PN 8876 Harness for a direct plug-in installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Chevrolet Blazer | V | - | 6 Cyl 4.3L | 262 |
- Direct Replacement; 5.6 mH Inductance; 44000 Max Voltage; 220 ma Peak Current; 300 uS Spark Duration; 100:1 Turns Ratio; Red; Single;CARB E.O. D-40-37 GM Dual Connector Coil Use PN[8876] Harness For Direct Plug-in~0.68 ohms Primary Resistance/4.8k ohms Secondary Resistance
- GM Dual Connection Ignition Coil; Direct Replacement; 5.6 mH Inductance; 44000 Max Voltage; 220 ma Peak Current; 300 uS Spark Duration; 100:1 Turns Ratio; Red; Single;
- GM Dual Connection Ignition Coil
- Product Attributes:
- Spark Duration: 300 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 100:1
- Inductance: 5.6 Mh
- Maximum Voltage: 44000
- Peak Current: 220 Ma
- Primary Resistance: .680 Ohms
- Secondary Resistance: 4.8k Ohms
-
Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory-style housings! MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks. The MSD Blaster GM Coil is designed to produce increased voltage and energy over the stock GM Coil. To get even more ignition performance, install an MSD Ignition Control with a PN 8876 Harness for a direct plug-in installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Chevrolet Blazer | V | - | 6 Cyl 4.3L | 262 |
- Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;CARB E.O. D-40-37
- Coil Pack; Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;
- Coil Pack
- Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 80:1
- Inductance: 4.2 Mh
- Peak Current: N/a
- Primary Resistance: .350 Ohms
- Secondary Resistance: 7.8k Ohms
-
Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Fuel Type | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|---|
| 2000 - Chevrolet S10 | L | 2190 | LN2 | GAS | 4 Cyl 2.2L | Xtreme | 4 | 134 |
- Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;CARB E.O. D-40-37
- Coil Pack; Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;
- Coil Pack
- Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 80:1
- Inductance: 4.2 Mh
- Peak Current: N/a
- Primary Resistance: .350 Ohms
- Secondary Resistance: 7.8k Ohms
-
Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2000 - Chevrolet Impala | V | - | 6 Cyl 3.4L | Base | 207 |
- Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;CARB E.O. D-40-37
- Coil Pack; Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;
- Coil Pack
- Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 80:1
- Inductance: 4.2 Mh
- Peak Current: N/a
- Primary Resistance: .350 Ohms
- Secondary Resistance: 7.8k Ohms
-
Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Fuel Type | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|---|
| 2000 - Chevrolet S10 | L | 2190 | LN2 | GAS | 4 Cyl 2.2L | LS | 4 | 134 |
- Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;CARB E.O. D-40-37
- Coil Pack; Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;
- Coil Pack
- Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 80:1
- Inductance: 4.2 Mh
- Peak Current: N/a
- Primary Resistance: .350 Ohms
- Secondary Resistance: 7.8k Ohms
-
Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2000 - Chevrolet Impala | V | - | 6 Cyl 3.4L | Base | 207 |
- Direct Bolt-In Replacement; 2-Bolt; Black; Set Of 8;OEM Replacement
- Direct Ignition Coil Set; Direct Bolt-In Replacement; 2-Bolt; Black; Set Of 8;
- Direct Ignition Coil Set
- Product Attributes:
- Engine Make/Size: Ls
-
Features:
- Excellent Reliability
- Direct Bolt-In Replacement
- Exceptional Value
- Look no further when its time to tune-up your LS! Bolt on legendary ignition performance with MSDs direct replacement coils. Reliable parts from the ignition leader at a price that wont break the bank.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Chevrolet Suburban 2500 |
- Direct Bolt-In Replacement; 2-Bolt; Black; Set Of 8;OEM Replacement
- Direct Ignition Coil Set; Direct Bolt-In Replacement; 2-Bolt; Black; Set Of 8;
- Direct Ignition Coil Set
- Product Attributes:
- Engine Make/Size: Ls
-
Features:
- Excellent Reliability
- Direct Bolt-In Replacement
- Exceptional Value
- Look no further when its time to tune-up your LS! Bolt on legendary ignition performance with MSDs direct replacement coils. Reliable parts from the ignition leader at a price that wont break the bank.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Chevrolet Silverado 1500 | V | 5328 | 8 Cyl 5.3L | 325 |
Showing 1 - 10 of 28 products
Loading...