2006 MSD Parts


Showing 1 - 10 of 30 products
Image
SKU
Product
Rating
Price

MSD
  • 8.5mm; Red; LS1 Conversion; OEM Cut
  • Custom Spark Plug Wire Set; 8.5mm; Red; LS1 Conversion; OEM Cut;
  • Custom Spark Plug Wire Set
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Boot Type: Multi-angle
    • Engine: Chevy Ls Series
  • Features:
    • Custom Fit For Make And Model Listed
    • Wires Are Pre-Cut To Exact Specifications
    • Bolt-on Performance
  • Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire, there are only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there are over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferromagnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produces a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.

Additional Fitment Information:
Vehicle
2006 - GMC Yukon XL 1500

MSD
  • Direct Bolt-In To Factory Connectors; 2.15 mH Induction; 36000 Max Voltage; 1320 mS Spark Duration; 80:1 Turns Ratio; Red; Set Of 8;CARB E.O. D-40-42 0.403 ohms Primary Resistance/14.5k ohms Secondary Resistance
  • Hemi Coil-On-Plug Direct Ignition Coil Set; Direct Bolt-In To Factory Connectors; 2.15 mH Induction; 36000 Max Voltage; 1320 mS Spark Duration; 80:1 Turns Ratio; Red; Set Of 8;
  • Hemi Coil-On-Plug Direct Ignition Coil Set
  • Product Attributes:
    • Spark Energy: 96 Mj Per Spark
    • Spark Duration: 1320 Ms
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 80:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inductance: 2.15 Mh
    • Engine Make/Size: 5.7l / 6.1l Hemi; 2005 - 2014
    • Maximum Voltage: 36000
    • Primary Resistance: .403 Ohms
    • Package Quantity: Set Of 8
    • Secondary Resistance: 14.5k Ohms
  • Features:
    • Improved High RPM Operation
    • Patented Winding Design and Materials
    • Direct Bolt-In to Factory Connectors
    • Secondary Current (mA): 56 mA
  • The Coils are a direct bolt-in and are specd with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.

Additional Fitment Information:
Vehicle Block CC Engine CID
2006 - Chrysler 300 V - 8 Cyl 5.7L 345

MSD
  • Street Fire™ Direct Ignition Coil Set
  • Direct Bolt-In To Factory Connectors; Set Of 8;OEM Replacement
  • Street Fire™ Direct Ignition Coil Set; Direct Bolt-In To Factory Connectors; Set Of 8;
  • Street Fire(TM) Direct Ignition Coil Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Increased Spark Energy Over The Entire RPM Range Of The Engine
    • Coils Bolt In Place Of The Factory Units
    • Accepts OEM Connections For A Simpler Installation
  • MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.

Additional Fitment Information:
Vehicle
2006 - Pontiac GTO

MSD
  • Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;CARB E.O. D-40-37
  • Coil Pack; Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;
  • Coil Pack
  • Product Attributes:
    • Spark Duration: N/a
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 80:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inductance: 4.2 Mh
    • Peak Current: N/a
    • Primary Resistance: .350 Ohms
    • Secondary Resistance: 7.8k Ohms
  • Features:
    • Direct performance replacement
    • For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
    • 80:1 turns ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Works w/Stock Ignition As Well As MSD Ignitions
    • CARB E.O. Approved
  • MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2006 - Buick Lucerne V 3800 6 Cyl 3.8L CXL 231

MSD
  • 4-Tower; Bolt-On; 7 mH Inductance; 36000 Max Voltage; 0.51 ohms Primary/12k ohms Secondary Resistance; 77:1 Turns Ratio; Red;CARB E.O. D-40-37
  • Ignition Coil; 4-Tower; Bolt-On; 7 mH Inductance; 36000 Max Voltage; 0.51 ohms Primary/12k ohms Secondary Resistance; 77:1 Turns Ratio; Red;
  • Ignition Coil
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 77:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inductance: 7 Mh
    • Maximum Voltage: 36000
    • Primary Resistance: .510 Ohms
    • Secondary Resistance: 12k Ohms
  • Features:
    • Performance replacement for Mitsubishi 2.0L 1996 to early 1999
    • Performance replacement for Dodge 2.0L from mid 1997 to 2002
    • 77:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Works w/Stock Ignition As Well As MSD Ignitions
    • Flat terminal connection only
    • CARB E.O. Approved
  • MSD offers these 4-tower coils as higher performance replacements for a variety of years ranging from 1994-2003 on vehicles from Dodge/Plymouth/Chrysler/Mitsubishi/Eagle/Jeep. This MSD Blaster Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD DIS-2 Ignition Control, PN 62112. There are two types of 4-tower coils used on the Eclipse, Neon, Talon, and other vehicles. The MSD Coil, PN 8239 has flat terminal pins, if you require a coil with round terminal pins, an Adapter can be ordered from Mopar Dealers as PN M04897087AA, or call the MSD Customer Service line at (915) 855-7123, ask for Adapter, ASY30160.

Additional Fitment Information:
Vehicle Block CC Engine Engine VIN CID
2006 - Chrysler PT Cruiser L 2429 4 Cyl 2.4L B 148

MSD
  • 4-Tower; Bolt-On; 7 mH Inductance; 36000 Max Voltage; 0.51 ohms Primary/12k ohms Secondary Resistance; 77:1 Turns Ratio; Red;CARB E.O. D-40-37
  • Ignition Coil; 4-Tower; Bolt-On; 7 mH Inductance; 36000 Max Voltage; 0.51 ohms Primary/12k ohms Secondary Resistance; 77:1 Turns Ratio; Red;
  • Ignition Coil
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 77:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inductance: 7 Mh
    • Maximum Voltage: 36000
    • Primary Resistance: .510 Ohms
    • Secondary Resistance: 12k Ohms
  • Features:
    • Performance replacement for Mitsubishi 2.0L 1996 to early 1999
    • Performance replacement for Dodge 2.0L from mid 1997 to 2002
    • 77:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Works w/Stock Ignition As Well As MSD Ignitions
    • Flat terminal connection only
    • CARB E.O. Approved
  • MSD offers these 4-tower coils as higher performance replacements for a variety of years ranging from 1994-2003 on vehicles from Dodge/Plymouth/Chrysler/Mitsubishi/Eagle/Jeep. This MSD Blaster Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD DIS-2 Ignition Control, PN 62112. There are two types of 4-tower coils used on the Eclipse, Neon, Talon, and other vehicles. The MSD Coil, PN 8239 has flat terminal pins, if you require a coil with round terminal pins, an Adapter can be ordered from Mopar Dealers as PN M04897087AA, or call the MSD Customer Service line at (915) 855-7123, ask for Adapter, ASY30160.

Additional Fitment Information:
Vehicle Block CC Engine Engine VIN CID
2006 - Chrysler PT Cruiser L 2429 4 Cyl 2.4L B 148

MSD
  • LS Ignition; For Both 24x And 58x Crank Trigger Engines; Red;Legal for Racing Use Only
  • MSD Ignition Controller; LS Ignition; For Both 24x And 58x Crank Trigger Engines; Red;
  • MSD Ignition Controller
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Engine Make/Size: Ls
  • Features:
    • Fits Most LS Engines
    • No PC Required For Basic Functionality
    • Six preprogrammed timing tables for easy set-up
    • Rotary Selector Switch Allows Timing Changes On The Fly
    • Nitrous And Boost Compatible
    • High Speed Data Acquisition
    • Fully Sealed Direct Plugin Connectors
    • Programmable Step Retard
    • Launch And Max Rev Limiters
    • Optional coolant temperature sensor input
    • Launch retard
    • Idle Timing Control
  • The MSD 6014 LS Ignition controller works with 24x/1x and 58x/4x crank/cam configurations. It auto-detects the correct configuration based on the reluctor wheel pattern, so there is no need to select one. It provides six pre-programmed (non-editable) timing tables for stock engines, three customizable 3-D tables, and one customizable timing plot. The desired table/plot is selected on the fly using the rotary dial. The customizable tables and plots can be programmed via MSDView. The LS Ignition controller includes a built-in 2.5 Bar MAP sensor that can be used with Naturally Aspirated or boosted applications. This allows for timing advance or retard based on the intake manifold pressure. 8MB of internal data logging is also included so you can set up, record, and review passes at the track. As the popularity of GM LS engines continues to grow, so does the demand for a powerful, reliable, and easily adaptable ignition system. MSD has answered this demand with an updated and improved version of the popular 6LS box. Whether using a stock crate engine or building a custom powerhouse, the MSD LS Ignition provides the control you need to achieve the performance you want. Dial in the perfect tune for your LS using the easily adjustable preset timing curves or hook up to your computer and program a custom setup with our user-friendly MSD View software. New features of the LS Ignition include; high-speed data acquisition, an optional coolant temperature sensor input, idle timing control, as well as individual cylinder timing. These features are in addition to the existing programmable step retard, launch retard, and RPM rev limiters from its predecessor.

Additional Fitment Information:
Vehicle Block CC Engine CID
2006 - Chevrolet Corvette V 5967 8 Cyl 6.0L 364

MSD
  • 8.5mm; Black; LS1 Conversion; OEM Cut
  • Custom Spark Plug Wire Set; 8.5mm; Black; LS1 Conversion; OEM Cut;
  • Custom Spark Plug Wire Set
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Boot Type: Multi-angle
    • Engine: Oem
    • Engine Make/Size: Oem
  • Features:
    • Custom Fit For Make And Model Listed
    • Wires Are Pre-Cut To Exact Specifications
    • Bolt-on Performance
  • Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2006 - GMC Envoy V 5328 8 Cyl 5.3L Denali 325

MSD
  • 103mm Throttle Body Bore; Polymer; Black w/Red Logos;CARB E.O. D-722-3 CARB E.O. D-722-3
  • Atomic Airforce Intake Manifold; Upper; 103mm Throttle Body Bore; Polymer; Black w/Red Logos;
  • Atomic Airforce Intake Manifold
  • Product Attributes:
    • Number of Carbs: None; For Fuel Injection
    • Usage: Street/strip
    • WARNING CA Proposition 65: Yes
    • Cylinder Head Type: Standard
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Engine Make/Size: Chevy Ls7
    • RPM Range: Oem
    • Emission: N/a
    • RPM: Oem
  • Features:
    • Polymer Material Resists Heat Soak
    • 103mm Throttle Bore For Greater Air Flow
    • Direct Flow Path Runner Design
    • Allows For The Use Of Stock Fuel Rails
  • When you're serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD's Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Chevrolet Corvette V 7011 Upper 8 Cyl 7.0L 427

MSD
  • Replacement Coil; w/Bracket; Red; Set Of 8;OEM Replacement
  • Blaster LS Direct Ignition Coil Set; Replacement Coil; w/Bracket; Red; Set Of 8;
  • Blaster LS Direct Ignition Coil Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Package Quantity: Set Of 8
  • Features:
    • Replacement Coil
    • Full One Year Warranty
  • Looking to replace your worn out LS coils with a more efficient upgrade? The new MSD Blaster LS Coil line is ideal for your modern GM muscle car or truck. The coils are designed as a bolt-in replacement yet have been thoroughly tested and detailed by our experienced engineering team.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
2006 - Chevrolet Suburban 1500 V 5328 8 Cyl 5.3L 325
Showing 1 - 10 of 30 products

Loading...