Image
Product
Price
- Fits GM LT1/LT4 Gen V Engines; 2014-Present Corvette/2015-Present Trucks/2016-17 Camaro SS; OEM Cut; Red
- 8.5mm Super Conductor Wire Set; Fits GM LT1/LT4 Gen V Engines; 2014-Present Corvette/2015-Present Trucks/2016-17 Camaro SS; OEM Cut; Red;
- 8.5mm Super Conductor Wire Set
- Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: Oem
- Engine:
- Chevy Lt1 Gen Iii 5.7
- Chevy Lt4 Gen V
-
Features:
- Black 8.5Mm Super Conductor Wire
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Fits:2015+ Cadillac Escalade 6.2L2016+ Chevrolet Camaro 6.2L2014-2019 Chevrolet Corvette 6.2L2015-2019 Chevrolet Corvette Z06 6.2L2014+ Chevrolet Silverado 1500 4.3L/5.3L/6.2L2015+ Chevrolet Suburban 5.3L2015+ Chevrolet Tahoe 5.3L2014+ GMC Sierra 1500 4.3L/5.3L/6.2L2015+ GMC Yukon 5.3L/6.2LEngineered from the inside out, the 8.5mm Wire offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 8.5 inch length of Super Conductor Wire, there are only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferromagnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produces a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Chevrolet Corvette |
- 103mm Throttle Body Bore; Polymer; Black w/Red Logos;CARB E.O. D-722-3 CARB E.O. D-722-3
- Atomic Airforce Intake Manifold; Upper; 103mm Throttle Body Bore; Polymer; Black w/Red Logos;
- Atomic Airforce Intake Manifold
- Product Attributes:
- Number of Carbs: None; For Fuel Injection
- Usage: Street/strip
- WARNING CA Proposition 65: Yes
- Cylinder Head Type: Standard
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size: Chevy Ls7
- RPM Range: Oem
- Emission: N/a
- RPM: Oem
-
Features:
- Polymer Material Resists Heat Soak
- 103mm Throttle Bore For Greater Air Flow
- Direct Flow Path Runner Design
- Allows For The Use Of Stock Fuel Rails
- When you're serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD's Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Chevrolet Camaro | V | 7011 | Upper | 8 Cyl 7.0L | 427 |
- 103mm Throttle Body Bore; Polymer; Black w/Red Logos;CARB E.O. D-722-3 CARB E.O. D-722-3
- Atomic Airforce Intake Manifold; Upper; 103mm Throttle Body Bore; Polymer; Black w/Red Logos;
- Atomic Airforce Intake Manifold
- Product Attributes:
- Number of Carbs: None; For Fuel Injection
- Usage: Street/strip
- WARNING CA Proposition 65: Yes
- Cylinder Head Type: Standard
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size: Chevy Lt1
- RPM Range: Oem
- Emission: N/a
- RPM: Oem
-
Features:
- Dyno Proven Bolt On Power
- Runner Layout And Plenum Design Promotes Max Airflow
- 2 Piece Design Easy Access To Runners
- Glass Reinforced Composite Resists Heat Soak
- Accepts OEM and Aftermarket Throttle Bodies
- Equipped w/Port Injector Bosses
- When you're serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD's Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Chevrolet Corvette | V | 6162 | Upper | 8 Cyl 6.2L | 376 |
- Street Fire™ Direct Ignition Coil Set
- Direct Bolt-In To Factory Connectors; Set Of 8;OEM Replacement
- Street Fire™ Direct Ignition Coil Set; Direct Bolt-In To Factory Connectors; Set Of 8;
- Street Fire(TM) Direct Ignition Coil Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Increased Spark Energy Over The Entire RPM Range Of The Engine
- Coils Bolt In Place Of The Factory Units
- Accepts OEM Connections For A Simpler Installation
- MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2014 - Chevrolet Camaro | V | 6162 | LSA | 8 Cyl 6.2L | P | 376 |
- Direct Bolt In Replacement; Red; Single;OEM Replacement
- Blaster Direct Ignition Coil; Direct Bolt In Replacement; Red; Single;
- Blaster Direct Ignition Coil
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Maximum Output And Performance To Provide Easier Starting
- Smoother Idle And Increased Power From Idle To Redline
- Direct Bolt-In Replacement For Exact Fit And Easy Installation
- No Additional Modifications Required
- Compatible With All Vehicle Electronics And Factory Computer
- Available In Red And Black
- 1-Year Warranty From The Date Of Purchase
- Exceeds Original Equipment Coil Output And Performance
- Replaces Original GM OE PN[12652405/12654078]
- MSD Blaster coils exceed original equipment specifications, are a direct bolt-in replacement for easy installation, come in red or black, and offer a 1-year warranty from the original date of purchase. Upgrading your coils will make your engine start easier, idle smoother, provide improved throttle response, and increased power from idle through redline. Since MSD Blaster coils are designed to replace factory coils, they will not interfere with any other electronics or the factory computer. This set of Blaster coils fits multiple GM vehicles equipped with a 2.0L Turbo 4-cylinder engine. Please see the application data below for specific year, make, and model fitment.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Buick Verano | L | 1998 | 4 Cyl 2.0L | 122 |
- Direct Replacement; Black; 8-Pack;OEM Replacement
- Blaster Direct Ignition Coil Set; Direct Replacement; Black; 8-Pack;
- Blaster Direct Ignition Coil Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Excellent Reliability And Performance
- Direct Bolt-In Replacement
- Limited 1-Year Warranty From The Date Of Purchase
- Meets Or Exceeds Original Equipment Specifications
- Available In Red And Black
- MSD continues to expand its performance ignition line with coils for late model Ford applications. If you are looking for an upgrade from stock, MSD Blaster ignition coils will provide the power, reliability and quality youve come to expect from with the MSD name. These late model Ford coils are designed as direct replacements for 6.2L engine with Driver and Passenger side coils, so they mount in the factory location and simply plug-in to factory connector. MSD developed a replacement coil that incorporates improved windings and material to enhance the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Ford F-350 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
- Direct Replacement; Red; 8-Pack;OEM Replacement
- Blaster Direct Ignition Coil Set; Direct Replacement; Red; 8-Pack;
- Blaster Direct Ignition Coil Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Excellent Reliability And Performance
- Direct Bolt-In Replacement
- Limited 1-Year Warranty From The Date Of Purchase
- Meets Or Exceeds Original Equipment Specifications
- Available In Red And Black
- MSD continues to expand its performance ignition line with coils for late model Ford applications. If you are looking for an upgrade from stock, MSD Blaster ignition coils will provide the power, reliability and quality youve come to expect from with the MSD name. These late model Ford coils are designed as direct replacements for 6.2L engine with Driver and Passenger side coils, so they mount in the factory location and simply plug-in to factory connector. MSD developed a replacement coil that incorporates improved windings and material to enhance the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Ford F-150 | V | 6210 | 8 Cyl 6.2L | 379 |
- Fits GM LT1/LT4 Gen V Engines; Black Jacket
- 8.5mm Super Conductor Wire Set; Fits GM LT1/LT4 Gen V Engines; Black Jacket;
- 8.5mm Super Conductor Wire Set
- Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: Straight
- Engine:
- Chevy Lt1 Gen Iii 5.7
- Chevy Lt4 Gen V
-
Features:
- Red 8.5Mm Super Conductor Wire
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Fits:2015-2016 Cadillac Escalade 6.2L2016 Chevrolet Camaro 6.2L2014-2016 Chevrolet Corvette 6.2L2015-2016 Chevrolet Corvette Z06 6.2L2014-2016 Chevrolet Silverado 1500 4.3L/5.3L/6.2L2015-2016 Chevrolet Suburban 5.3L2015-2016 Chevrolet Tahoe 5.3L2014-2016 GMC Sierra 1500 4.3L/5.3L/6.2L2015-2016 GMC Yukon 5.3L/6.2LEngineered from the inside out, the 8.5mm wire offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 8.5 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Chevrolet Corvette |
- Direct Bolt-In To Factory Connectors; Set Of 8;OEM Replacement
- Street Fire™ Direct Ignition Coil Set; Direct Bolt-In To Factory Connectors; Set Of 8;
- Street Fire™ Direct Ignition Coil Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Increased Spark Energy Over The Entire RPM Range Of The Engine
- Coils Bolt In Place Of The Factory Units
- Accepts OEM Connections For A Simpler Installation
- MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - GMC Sierra 1500 | V | 6162 | 8 Cyl 6.2L | 376 |
- 103mm Throttle Body Bore; Polymer; Black w/Red Logos;CARB E.O. D-722-3 CARB E.O. D-722-3
- Atomic Airforce Intake Manifold; Upper; 103mm Throttle Body Bore; Polymer; Black w/Red Logos;
- Atomic Airforce Intake Manifold
- Product Attributes:
- Number of Carbs: None; For Fuel Injection
- Usage: Street/strip
- WARNING CA Proposition 65: Yes
- Cylinder Head Type: Standard
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size: Chevy Ls7
- RPM Range: Oem
- Emission: N/a
- RPM: Oem
-
Features:
- Polymer Material Resists Heat Soak
- 103mm Throttle Bore For Greater Air Flow
- Direct Flow Path Runner Design
- Allows For The Use Of Stock Fuel Rails
- When you're serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD's Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Chevrolet Camaro | V | 7011 | Upper | 8 Cyl 7.0L | 427 |
Showing 1 - 10 of 36 products
Loading...