Image
Product
Price
- Standard Grade Universal Catalytic Converter - 2.50in.
- From 9/1/1987 Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 94007
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - BMW 325is | L | 2494 | 6 Cyl 2.5L | 152 |
- Standard Grade Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 94007
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1990 - BMW 750iL | V | 4988 | Right | 12 Cyl 5.0L | - |
- Standard Grade Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 94007
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - BMW 325iX | L | 2494 | 6 Cyl 2.5L | 152 |
- Standard Grade Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 94007
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1990 - BMW 750iL | V | 4988 | Left | 12 Cyl 5.0L | - |
- Standard Grade Universal Catalytic Converter - 2.50in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 94007
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - BMW 325i | L | 2494 | 6 Cyl 2.5L | 152 |
- Standard Grade Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 2
- Air Tube Adaptable: No
- Body Length: 13.375
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 2
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 94008
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94008 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - BMW 735iL | L | 3430 | 6 Cyl 3.5L | - |
- Standard Grade Direct-Fit Catalytic Converter
- From 9/1/1987 Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: Yes
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Title: Magnaflow Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23554
- California Air Resources Board (CARB) Certified: No
-
Features:
- Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23554 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1987-1993 BMW 325i and 1987-1991 BMW 325is. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - BMW 325is | L | 2494 | 6 Cyl 2.5L | 152 |
- Standard Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: Yes
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Title: Magnaflow Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23554
- California Air Resources Board (CARB) Certified: No
-
Features:
- Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23554 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1987-1993 BMW 325i and 1987-1991 BMW 325is. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - BMW 325i | L | 2494 | 6 Cyl 2.5L | 152 |
- Standard Grade Universal Catalytic Converter - 2.00in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 2
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 93507
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93507 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - BMW 525i | L | 2494 | 6 Cyl 2.5L | 152 |
- Touring Series Stainless Cat-Back System
- Dual Straight Driver Side Rear Exit
- Magnaflow Touring Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Folded Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Touring
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Straight Driver Side Rear
- Main Piping Diameter: 2.25
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow Touring Series Cat-back Performance Exhaust System 16535
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- 409 Stainless Steel Construction
- Increased Horsepower and Torque
- Mandrel bent tubing
- The MagnaFlow Touring Series Cat-Back Performance Exhaust System 16535 is the perfect partner for your 2.5L 1987-1991 BMW to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 1 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 16535 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This BMW exhaust system is compatible with 1987-1991 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your BMW like a glove. 16535 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - BMW 325i | L | 2494 | 6 Cyl 2.5L | 152 |
Showing 1 - 10 of 10 products
Loading...