Image
Product
Price
- HM Grade Universal Catalytic Converter - 2.25in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99205hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Volkswagen Jetta | L | 1781 | Manual | 4 Cyl 1.8L | - |
- HM Grade Universal Catalytic Converter - 2.25in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99205hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen EuroVan | V | 2771 | 6 Cyl 2.8L | - |
- HM Grade Universal Catalytic Converter - 2.00in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.00in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99204hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99204HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Volkswagen Golf | L | 1984 | AVH | 4 Cyl 2.0L | 121 |
- HM Grade Universal Catalytic Converter - 2.25in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Post Converter
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99305hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99305HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Passat | L | 1781 | 4 Cyl 1.8L | - |
- Touring Series Stainless Cat-Back System
- Dual Straight Driver Side Rear Exit For Vehicles with Fascia Cutouts
- Magnaflow Touring Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Muffler Body Length Position Front: 14
- Exhaust Tip Quantity: 2
- Muffler (Rear) Body Height: 5
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: No
- Exhaust Tip Length: 7.5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler Body Height Position Rear: 5
- Type: Cat-back
- Muffler (Front) Body Width: 4
- Series: Touring
- Exhaust Tip Cut: Straight Cut
- Muffler Body Width Position Front: 4
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Muffler Body Length Position Rear: 14
- Exit Style: Dual Straight Driver Side Rear
- Main Piping Diameter: 2.25
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler (Front) Body Length: 14
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 14
- Title: Magnaflow Touring Series Cat-back Performance Exhaust System 15745
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Muffler Body Height Position Front: 4
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- 409 Stainless Steel Construction
- Increased Horsepower and Torque
- Mandrel bent tubing
- The MagnaFlow Touring Series Cat-Back Performance Exhaust System 15745 is the perfect partner for your 1.8L, 2.8L 1999-2005 Volkswagen to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips. 15745 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This Volkswagen exhaust system is compatible with 1999-2005 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen like a glove. 15745 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Golf | V | 2771 | 6 Cyl 2.8L | - |
- Touring Series Stainless Cat-Back System
- Dual Straight Driver Side Rear Exit without Fascia Cutouts
- Magnaflow Touring Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Muffler Body Length Position Front: 14
- Exhaust Tip Quantity: 2
- Muffler (Rear) Body Height: 5
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: No
- Exhaust Tip Length: 7
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler Body Height Position Rear: 5
- Type: Cat-back
- Muffler (Front) Body Width: 4
- Series: Touring
- Exhaust Tip Cut: Angle Cut
- Muffler Body Width Position Front: 4
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Muffler Body Length Position Rear: 14
- Exit Style: Dual Straight Driver Side Rear
- Main Piping Diameter: 2.25
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler (Front) Body Length: 14
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 14
- Title: Magnaflow Touring Series Cat-back Performance Exhaust System 15648
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Muffler Body Height Position Front: 4
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- 409 Stainless Steel Construction
- Increased Horsepower and Torque
- Mandrel bent tubing
- The MagnaFlow Touring Series Cat-Back Performance Exhaust System 15648 is the perfect partner for your 1.8L, 2.0L 1998-2006 Volkswagen to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. 15648 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This Volkswagen exhaust system is compatible with 1998-2006 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen like a glove. 15648 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Beetle | L | 1984 | 4 Cyl 2.0L | 121 |
- Standard Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 9.75
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 54955
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 54955. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Passat | L | 1781 | 4 Cyl 1.8L | - |
- HM Grade Universal Catalytic Converter - 2.00in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.00in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Post Converter
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99304hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99304HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Volkswagen Passat | V | 2771 | Automatic | Rear Left | 6 Cyl 2.8L | - |
- HM Grade Universal Catalytic Converter - 2.00in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.00in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Post Converter
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99304hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99304HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Volkswagen Passat | V | 2771 | Automatic | Rear Right | 6 Cyl 2.8L | - |
- HM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Post Converter
- Outlet Gasket Included: No
- Series: Hm Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Air Tube Adaptable: No
- Title: Magnaflow Hm Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23710
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23710. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2005 Volkswagen Jetta, 2001-2005 Volkswagen Beetle, and more, this direct-fit catalytic converter also interchanges with OE parts 1J0 254 508 G and 1J0 254 509 AX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
1J0 253 208 LL, 1J0 254 500 H, 1J0 254 500 J, 1J0 254 500 JX, 1J0 254 502 T, 1J0 254 503, 1J0 254 503 X, 1J0 254 506 H, 1J0 254 506 J, 1J0 254 506 JX, 1J0 254 508 G, 1J0 254 508 GX, 1J0 254 508 H, 1J0 254 509 A, 1J0 254 509 AX, 1J0254500H, 1J0254502T, 1J0254503X...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Volkswagen Golf | L | 1984 | AVH | 4 Cyl 2.0L | 121 |
Showing 1 - 10 of 21 products
Loading...