Image
Product
Price
- SHOCKS
- FRONT SHOCK - 3" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 12.3" EXTENDED, 8.1" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1200SL-1 IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1997 - Chevrolet Suburban 1500 | RWD |
- SHOCKS
- FRONT SHOCK - 2" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 13.3" EXTENDED, 8.6" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1300SL-1 IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1997 - Chevrolet Blazer | RWD |
- SHOCKS
- FRONT SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, LARGE DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN FEATURES A VULCANIZED RUBBER LOWER BUSHING 15.0" EXTENDED, 9.5" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1450SL IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1997 - Chevrolet C2500 Suburban | RWD |
- SHACKLES
- 1.5"-2" REAR SHACKLES COMES WITH SELF TAPPING GREASE FITTINGS BUSHINGS DO NOT COME GREASED AND REQUIRE A SYNTHETIC OR LITHIUM GREASE THESE WILL ACT AS 1.5"-2" LIFT SHACKLES ON THE 98-09 RANGERS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 1.5" - 2" REAR LOWERING SHACKLES
- MAXTRAC SUSPENSION'S PART# 410520 IS A PAIR OF 1.5"-2" REAR SHACKLES FABRICATED FROM STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - GMC Yukon |
- SPINDLES
- 3.5 in. Lift; Made From Ductile Iron; E-Coated; Includes All Necessary Hardware
- 3.5" LIFT SPINDLES
- Axle Spindle
-
Features:
- Ductile Iron Construction
- 100 Percent Bolt On Installation
- Allows Fitting Bigger Wheels And Tires Easily
- Track Width Increases Plus .5 in. Per Side
- MAXTRAC SUSPENSION'S PART# 703535 IS A PAIR OF 3.5" LIFT SPINDLES MADE FROM DUCTILE STEEL & E-COATED BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1997 - Ford F-150 | RWD |
- COILS
- Powder Coated Grey; Hot Wound; Single Rate;w/2 in. Lift;
- 2" FRONT LIFT COILS
- Coil Spring
-
Features:
- Made In The USA
- Easily Raises Your Vehicle 2 in. From Factory Stance
- Powder Coated For The Longevity Of The Coil
- Provides Comfortable Ride
- MAXTRAC SUSPENSION'S PART# 753520-8 IS A PAIR OF 2" FRONT LIFT COILS MADE FROM HOT WOUND STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 1997 - Ford F-150 | V | - | Front | 8 Cyl 5.4L | XL | RWD | 330 |
- SPINDLES
- 2" LOWERING SPINDLES FITS 92-98 GM 1500 2WD SINGLE CAB, 88-91 EXT CAB & 454 SS ALL CABS REQUIRES MINIMUM 15" WHEEL W/ 3.5" BACKSPACING OR LESS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 100520H IS A PAIR OF 2" LOWERING SPINDLES CAST FROM STEEL & E-COATED BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1997 - GMC Yukon | RWD |
- COILS
- Powder Coated Grey; Hot Wound; Single Rate;w/2 in. Lift;
- 2" FRONT LIFT COILS
- Coil Spring
-
Features:
- Made In The USA
- Easily Raises Your Vehicle 2 in. From Factory Stance
- Powder Coated For The Longevity Of The Coil
- Provides Comfortable Ride
- MAXTRAC SUSPENSION'S PART# 753520-8 IS A PAIR OF 2" FRONT LIFT COILS MADE FROM HOT WOUND STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 1997 - Ford F-150 | V | - | Front | 8 Cyl 5.4L | Base | RWD | 330 |
- COIL SPACERS
- 2" COIL SPACERS SPACERS GET INSTALLED ON THE BOTTOM OF THE COIL SPRING & RETAIN FACTORY COIL ISOLATOR MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 2" FRONT COIL SPACERS
- MAXTRAC SUSPENSION'S PART# 820120 IS A PAIR OF 2" COIL SPACERS MADE FROM FORGED ALUMINUM AND ANIDIZED GREY
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1997 - Dodge Ram 1500 | RWD |
- SPINDLES
- 3.5 in. Lift; Made From Ductile Iron; E-Coated; Includes All Necessary Hardware
- 3.5" LIFT SPINDLES
- Axle Spindle
-
Features:
- Ductile Iron Construction
- 100 Percent Bolt On Installation
- Allows Fitting Bigger Wheels And Tires Easily
- Track Width Increases Plus .5 in. Per Side
- MAXTRAC SUSPENSION'S PART# 703535 IS A PAIR OF 3.5" LIFT SPINDLES MADE FROM DUCTILE STEEL & E-COATED BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1997 - Ford F-150 | RWD |
Showing 1 - 10 of 16 products
Loading...