Image
Product
Price
- 1 in.; Cast Iron; E-Coated; Non Tapered
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 1 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2006 - Dodge Ram 1500 | Laramie |
- Powder Coated Grey; Hot Wound; Single Rate;w/2 in. Lift;
- Coil Spring; Powder Coated Grey; Hot Wound; Single Rate;
- Coil Spring
-
Features:
- Made In The USA
- Easily Raises Your Vehicle 2 in. From Factory Stance
- Powder Coated For The Longevity Of The Coil
- Provides Comfortable Ride
- Coil Spring; Powder Coated Grey; Hot Wound; Single Rate
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2006 - Dodge Ram 1500 | V | - | Front | 8 Cyl 5.7L | SLT | RWD | 345 |
- Powder Coated Grey; Hot Wound; Single Rate;w/2 in. Drop;
- Coil Spring; Powder Coated Grey; Hot Wound; Single Rate;
- Coil Spring
-
Features:
- Made In The USA
- Easily Lowers Your Vehicle 2 in. From Factory Stance
- Powder Coated For The Longevity Of The Coil
- Provides Comfortable Ride
- Coil Spring; Powder Coated Grey; Hot Wound; Single Rate
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2006 - Dodge Ram 1500 | V | - | Front | 8 Cyl 5.7L | Laramie | RWD | 345 |
- 4.5 in. Lift; Includes Front Spindles With Brake Lines/Blocks/U-Bolts/Rear Fox Performance Shocks
- Suspension Lift Kit w/Shocks; 4.5 in. Lift; Includes Front Spindles With Brake Lines/Blocks/U-Bolts/Rear Fox Performance Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 4.5 In.
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 4.5-inch lift for the Dodge Ram 1500 is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Fox 2.0 monotube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2006 - Dodge Ram 1500 | V | - | 6 Cyl 3.7L | ST | RWD | 226 |
- 2 in. Drop; 5 in. Rear Drop; Includes Coils/Rear Coils/Flip Kit/And Rear Shocks;w/2 in. Drop And Rear w/5 in. Drop
- Lowering Kit; 2 in. Front Drop; 5 in. Rear Drop; Includes Front Coils/Rear Coils/Flip Kit/Front And Rear Shocks;
- Lowering Kit
-
Features:
- Built In Pinion Correction
- Complete With U Bolt Hardware
- Universal Application
- Our 2/4 drop is a great way to lower and level out your vehicle without breaking the budget. This budget friendly kit comes with a 2-inch lowering coil springs and shocks for the front. We then drop the rear comes with a 5 inch flip kit and rear twin tube shocks for a better ride. What makes this kit great is you can always add or remove components to get the look you're after.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2006 - Dodge Ram 1500 | V | - | Front and Rear | 8 Cyl 4.7L | Laramie | RWD | 287 |
- 2.5 in. Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks; For Vehicles w/3.562 in. Axle Diameter For Use w/3.625 in. Axles
- Lift Kit-Suspension Component; 2.5 in. Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks; For Vehicles w/3.562 in. Axle Diameter;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 2.5 In.
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Suspension Lift Kit w/Shocks; 2.5 in. Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks; For Vehicles w/3.562 in. Axle Diameter
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2006 - Dodge Ram 2500 | ST |
- Loop/Loop; 20.30 in. Extended; 12.40 in. Collapsed; Includes Hardware; Two 9/16 in. Sleeve; For Use w/Lift Coil; Must Be Installed w/Shock Shaft Towards The Top;w/4 - 5 in. Drop;
- Twin Tube Gas Shock; Loop/Loop; 20.30 in. Extended; 12.40 in. Collapsed; Includes Hardware; Two 9/16 in. Sleeve; For Use w/Lift Coil; Must Be Installed w/Shock Shaft Towards The Top;
- Twin Tube Gas Shock
- Product Attributes:
- Collapsed Length: 12.400 In.
- Shock Stroke: 7.900 In.
- Extended Length: 20.300 In.
-
Features:
- Replacement Shocks
- Twin Tube
- Universal Gas Charged
- Includes All Necessary Hardware
- Twin Tube Gas Shock; Loop/Loop; 20.30 in. Extended; 12.40 in. Collapsed; Includes Hardware; Two 9/16 in. Sleeve; For Use w/Lift Coil; Must Be Installed w/Shock Shaft Towards The Top
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2006 - Dodge Ram 1500 | Rear | SLT | RWD |
- 6 in. Lift; Includes Front Lift Spindles With Brake Lines/Front Lift Coils for Diesel/Front MaxTrac Shocks/Rear Blocks/U-bolts/Rear MaxTrac Shocks For 4.125 Axle Diameter
- Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Front Lift Spindles With Brake Lines/Front Lift Coils for Diesel/Front MaxTrac Shocks/Rear Blocks/U-bolts/Rear MaxTrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Suspension Lift Kit w/Shocks
- The Maxtrac Suspension 6-inch lift for the Dodge Ram 2500 is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory coil spring with a lifted coil spring and Maxtrac twin-tube shocks to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2006 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | Laramie | RWD | 359 |
- 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 3 In.
-
Features:
- Made In The USA
- Fabricated Steel Blocks
- Powder Coated For A Long Life
- Angled For Pinion Correction
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2006 - Dodge Ram 1500 | Laramie |
- 2 in. Rear Lift; Includes 2 Lift Blocks; 4 U-Bolts/Nuts/Washers; Fox Rear Shocks
- Lift Kit-Suspension Component; 2 in. Rear Lift; Includes 2 Lift Blocks; 4 U-Bolts/Nuts/Washers; Fox Rear Shocks;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 2 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Suspension Lift Kit w/Shocks; 2 in. Rear Lift; Includes 2 Lift Blocks; 4 U-Bolts/Nuts/Washers; Fox Rear Shocks
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2006 - Dodge Ram 1500 | ST | RWD |
Showing 1 - 10 of 98 products
Loading...