Image
Product
Price
- 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 3 In.
-
Features:
- Made In The USA
- Fabricated Steel Blocks
- Powder Coated For A Long Life
- Angled For Pinion Correction
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Toyota Tacoma |
- 1 in.; Cast Iron; E-Coated; Non Tapered
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 1 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Toyota Tacoma |
- 6 in. Lift; Includes Front Spindles With Brake Lines/Front Strut Spacers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear MaxTrac Shocks 6 Lug Wheel
- Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Front Spindles With Brake Lines/Front Strut Spacers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear MaxTrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 35 in. Tire
- Track Width Increases Plus .75 in. Per Side
- Prior To Installation Measuring Is Required
- Trimming May Be Required For Optimal Fender Well Clearance
- The Maxtrac Suspension 6.5-inch lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2011 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | Base | RWD | 241 |
- 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Fox Rear Shocks 6 Lug Wheel
- Lift Kit-Suspension Component; 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Fox Rear Shocks;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 2 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Suspension Lift Kit w/Shocks; 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Fox Rear Shocks
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2011 - Toyota Tacoma | Base | RWD |
- Includes 2 Center Support Spacers/Rear Brake Line Bracket/2 Emergency Brake Brackets And All Necessary Hardware
- Drive Shaft Carrier Bearing Drop; Includes 2 Center Support Spacers/Rear Brake Line Bracket/2 Emergency Brake Brackets And All Necessary Hardware;
- Drive Shaft Carrier Bearing Drop
-
Features:
- Made In The USA
- Includes All Necessary Hardware
- Rear Brake Line Extension Brackets
- Carrier Bearing Spacers
- Drive Shaft Carrier Bearing Drop; Includes 2 Center Support Spacers/Rear Brake Line Bracket/2 Emergency Brake Brackets And All Necessary Hardware
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - Toyota Tundra | RWD |
- Subframes; Rear Shocks; Box Two Of Three
- Lift Kit-Suspension Component; Subframes; Rear Shocks; Box Two Of Three;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Suspension Component Box
- Suspension Component Box
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - Toyota Tundra | 4WD |
- 3.5 in. Lift; Includes Spindles w/Brake Lines/Rear Blocks/U-Bolts/Rear Maxtrac Shocks
- Suspension Lift Kit w/Shocks; 3.5 in. Lift; Includes Spindles w/Brake Lines/Rear Blocks/U-Bolts/Rear Maxtrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 3.5 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 33 in. Tire
- 18 in. Wheel Or Larger With 6.5 in. Backspacing Or Less
- Track Width Increases 1 in. Per Side
- Prior To Installation Measuring Is Required
- Trimming May Be Required For Optimal Fender Well Clearance
- The Maxtrac Suspension 3.5-inch lift for the Toyota Tundra is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2011 - Toyota Tundra | V | 5663 | 8 Cyl 5.7L | RWD | 345 |
- 6 in. Lift; Includes Front Spindles With Brake Lines/Front Strut Spacers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear MaxTrac Shocks
- Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Front Spindles With Brake Lines/Front Strut Spacers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear MaxTrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 35 in. Tire
- Track Width Increases Plus .75 in. Per Side
- Prior To Installation Measuring Is Required
- Trimming May Be Required For Optimal Fender Well Clearance
- The Maxtrac Suspension 6.5-inch lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2011 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | Pre Runner | 241 |
- 6 in. Lift; Includes Front Spindles With Brake Lines/Front Fox 2.0 Coilovers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear Fox Performance Shocks 6 Lug Wheel
- Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Front Spindles With Brake Lines/Front Fox 2.0 Coilovers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear Fox Performance Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 6.5-lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory strut with a Fox fully adjustable Coil-over to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Fox performance shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2011 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | Base | RWD | 241 |
- 2 in.; Cast Iron; E-Coated; Tapered
- Lift Blocks; 2 in.; Cast Iron; E-Coated; Tapered;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 2 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Angled For Pinion Correction
- Lift Blocks; 2 in.; Cast Iron; E-Coated; Tapered
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Toyota Tundra |
Showing 1 - 10 of 112 products
Loading...