Image
Product
Price
- Street Pro: Kit:1955-83 GM 10.5" x 1-1/8x10
- Street Pro: Kit:1955-83 GM 10.5" x 1-1/8x10
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Pressure Plate Style: Diaphragm
- Application: 1955-83 Gm
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Horsepower Rating: 400
- Make: Gm
- Number of Discs: Single
- Disc Diameter: 10.5in.
- Spline: 1-1/8 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
- The Street Pro is the perfect choice for an entry level performance clutch for the street. We recommend it for cars up to 400hp (depending on part number) with mild engine mods and street tires. Included is a high clamp load pressure plate, an organic disc for smooth and even engagement with increased holding power over stock. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a clutch that's a great step up from your stock set up, the McLeod Street Pro is the clutch for you.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Transmission Manuf. Code | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet One-Fifty Series | V | 4638 | Manual | 8 Cyl 4.6L | T-10 | Base | 283 |
- Bushing Oilite GM Stepped .400 Longer Than Stock .592 ID
- Bushing Oilite GM Stepped .400 Longer Than Stock .592 ID
- Product Attributes:
- NOTE: This Pilot Bushing Fits In The Outer Recess Of The Crank.
- ID (in): .590in.
- Secondary Step OD (in): 1.00in.
- OD (in): 1.709in.
- Thickness: .645in.
- Worn pilot bearings cause rough shifting, which can wear out your transmission. When you change your clutch, count on McLeod for high-quality pilot bearings and bushings to properly align your clutch with the crankshaft.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet Truck | V | 4638 | Manual | United States | 8 Cyl 4.6L | 3400 | 283 |
- Flywheel: Nodular Iron: Chevrolet: 1955-85 SBC: 168T: 30 lbs.
- Flywheel: Nodular Iron: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 30 lbs.
- Product Attributes:
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Tooth Quantity: 168
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Crankshaft Bolt Hole Quantity: 6
- Engine 2: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Weight: 30 Lbs.
- Make: Chevrolet
-
Features:
- Cast Iron Flywheels are a inexpensive way to replace your old used flywheel with new!
- McLeod nodular iron flywheels offer high-quality, yet low-cost alternatives to the hassles of resurfacing a flywheel. Nodular iron flywheels are stronger than the OEM models, and these McLeod units are direct bolt-in units. Don't overlook your flywheel when replacing your clutch. But don't resurface, replace with McLeod nodular iron flywheels
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1957 - Chevrolet Truck | V | 4638 | Manual | 8 Cyl 4.6L | 3400 | 283 |
- Pilot Bearing GM Except Pontiac 1.095" OD X .592" ID X .740" Long
- Pilot Bearing GM Except Pontiac 1.095" OD X .592" ID X .740" Long
- Product Attributes:
- Height (in):: .740in.
- Inside Diameter (in):: .590in.
- Pilot Bushing Type:: Roller
- Quantity:: Sold Individually
- Outer Diameter (in):: 1.094in.
- Worn pilot bearings cause rough shifting, which can wear out your transmission. When you change your clutch, count on McLeod for high-quality pilot bearings and bushings to properly align your clutch with the crankshaft.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet Truck | V | 4343 | Manual | United States | 8 Cyl 4.3L | 3200 | 265 |
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 30 lbs.
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 30 lbs.
- Product Attributes:
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Tooth Quantity: 168
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Crankshaft Bolt Hole Quantity: 6
- Engine 2: 1970-1990 Bbc 2pc Seal (large Register)
- Weight: 30 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Make: Chevrolet
- Additional Counter Weight Kit Required: 560222
-
Features:
- McLeod Racing Billet Steel flywheels is the best choice for customers that want a dependable good quality steel flywheel. Made from Billet steel the McLeod Racing flywheels are SFI rated to almost 9000 RPM.
- McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1957 - Chevrolet Two-Ten Series | V | 4638 | United States | 8 Cyl 4.6L | Base | 283 |
- Super Street Pro:Kit:1955-83 GM 10.5" x 1-1/8x10
- Super Street Pro:Kit:1955-83 GM 10.5" x 1-1/8x10
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Pressure Plate Style: Diaphragm
- Application: 1955-83 Gm
- Alignment Tool Included: Yes
- Disc Material: Organic/ceramic
- Pilot Bushing Included: Yes
- Horsepower Rating: 500
- Make: Gm
- Number of Discs: Single
- Disc Diameter: 10.5in.
- Spline: 1-1/8 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
- The Super Street Pro clutch kit is ideal for both the street and the track. We recommend it for cars up to 550 Hp (depending on part number) with moderate engine mods and street tires. The kit is SFI approved. Included is a high clamp load pressure plate, a dual faced organic and metallic disc for smooth engagement and awesome holding power. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a street friendly yet track proven clutch, the McLeod Super Street Pro is your best choice.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Transmission Manuf. Code | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet One-Fifty Series | V | 4638 | Manual | 8 Cyl 4.6L | T-10 | Base | 283 |
- Bolt Pak 3/8" Pressure Plate Small Hex Head (6 Per Box)
- Bolt Pak 3/8-16 Pressure Plate Bolt:Small Hex Head:(6 Bolts Per Box)
- Product Attributes:
- Thread Size: 3/8-16
- Nuts Included: No
- Fastener Style: Bolt
- Quantity: Pack Of 6
- Fastener Head Style: Hex
- Washers Included: No
- Wrench Diameter: 1/2in.
- Fastener Material: Steel
- Fastener Finish: Black Oxide
- Underhead Length: .910in.
- McLeod pressure plate bolts fasten your pressure plate to your flywheel for durable bolt-on performance. The bolts come in various thread sizes and styles to ensure a correct fit for your specific vehicle application. They are manufactured from premium-grade steel and sport a black oxide finish to resist corrosion. When it comes to bolt-on performance, make McLeod your parts connection and get the most out of your ride.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet Bel Air | V | 4638 | Manual | United States | 8 Cyl 4.6L | Base | 283 |
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 22 lbs.
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 22 lbs.
- Product Attributes:
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Tooth Quantity: 168
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Crankshaft Bolt Hole Quantity: 6
- Engine 2: 1970-1990 Bbc 2pc Seal (large Register)
- Weight: 22 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Make: Chevrolet
- Additional Counter Weight Kit Required: 560222
-
Features:
- McLeod Racing Billet Steel flywheels is the best choice for customers that want a dependable good quality steel flywheel. Made from Billet steel the McLeod Racing flywheels are SFI rated to almost 9000 RPM.
- McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1957 - Chevrolet Truck | V | 4343 | United States | 8 Cyl 4.3L | 3600 | 265 |
- Bolt Pak 7/16 x 20. GM, Ford, Mopar Crank Bolts, Set of 6
- Bolt Pak 7/16 x 20. GM, Ford, Mopar Crank Bolts, Set of 6
- Product Attributes:
- Thread Size: 7/16-20
- Material Finish: Black Oxide
- Washer Included: No
- Head Style: 6 Point
- Fastener Grade: Grade 8
- Quantity: Sold In Package Of 6 Bolts.
- Bolt Location: Flywheel To Crankshaft
- Fastener Material: Steel
-
Features:
- All McLeod Racing hardware is quality Grade 8 Hardware that is to made proprietary to McLeod Racings specs. We also are proud to use ARP the world wide leader in performance hardware in some parts numbers.
- Flywheel bolts play a very important role in the performance and safety of race cars and street machines alike. That's why McLeod offers flywheel bolt kits that are far superior to OEM hardware, so you can bolt in your flywheel with confidence. McLeqod steel bolt kits offer increased strength and improved flywheel register.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet One-Fifty Series | L | 3852 | Manual | United States | 6 Cyl 3.8L | Base | 235 |
- Throw Out Bearing: GM Short 1.525" Tall
- Throw Out Bearing: GM Short 1.525" Tall
- Product Attributes:
- Bearing Retainer O.D.: 1.375in.
- Spline: 1 1/8in. X 10
- McLeod offers OEM replacement throwout bearings with angular contact, constant running bearings for long life and durabilty. Choose from General Motors, Ford & Chrysler applications. Mcleod also offers an exclusive adjustable height bearing for General Motors & Ford applications. These bearings are adjustable to three different height locations to help maintain proper mechanical linkage geometry.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1957 - Chevrolet Two-Ten Series | V | 4638 | Manual | 8 Cyl 4.6L | Base | 283 |
Showing 1 - 10 of 10 products
Loading...