Image
Product
Price
- Stabilizer Bar Link Kit
- Includes Polyurethane Bushings and Solid Metal Sleeve for Enhanced Performance - Barrel Nut Allows for Easier Installation
- MOOG K700525 Stabilizer Bar Link Kit
- Product Attributes:
- Sleeve Length: 0.42
- End 1 Type: Bolt On
- Bolt Length: 4.25
-
Features:
- EASY TO INSTALL -- Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGHT TECHNOLOGY FOR THE REPAIR -- Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
265-1416, 5272324AC, 531-246, 5S4Z5495AA
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Nissan 200SX | Front |
- Non-Greaseable Super Strength Universal Joint
- with Lube Fitting in Body VIN Begins With 1N6 Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 269 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|
| 1988 - Nissan D21 | V | 2960 | At Center Bearing | 2 | 6 Cyl 3.0L | Extended Cab Pickup | RWD | 181 |
- Non-Greaseable Super Strength Universal Joint
- USA Built with Lube Fitting in Body VIN Begins With 1N6 Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 269 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1988 - Nissan D21 | V | 2960 | Rear Driveshaft at Transmission | 6 Cyl 3.0L | 4WD | 181 |
- Non-Greaseable Super Strength Universal Joint
- USA Built with Lube Fitting in Body VIN Begins With 1N6 Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 269 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1988 - Nissan D21 | V | 2960 | Rear Driveshaft at Rear Axle | 6 Cyl 3.0L | 4WD | 181 |
- Non-Greaseable Super Strength Universal Joint
- USA Built with Lube Fitting in Body VIN Begins With 1N6 Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 269 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1988 - Nissan D21 | V | 2960 | Front Driveshaft at Front Axle | 6 Cyl 3.0L | 4WD | 181 |
- Non-Greaseable Super Strength Universal Joint
- USA Built with Lube Fitting in Body VIN Begins With 1N6 Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 269 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1988 - Nissan D21 | V | 2960 | Front Driveshaft at Transfer Case | 6 Cyl 3.0L | 4WD | 181 |
- Non-Greaseable Super Strength Universal Joint
- with Lube Fitting in Body VIN Begins With 1N6 Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 269 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-0153BF, 10153G, 20049P, 45U0145, 5-529X, 529, DT467, G5-467X, U153HP
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|
| 1988 - Nissan D21 | V | 2960 | At Transmission | 2 | 6 Cyl 3.0L | Standard Cab Pickup | RWD | 181 |
- Camber Adjusting Kit
- From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 14 (mm) Bolts
- MOOG K90474 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13322A, 264-3642, 41214, 45K18036, 616-1030, 616-1036, 787504, AA3642, AK90399, K90474, MS50202, MS60005, VV13322A
Additional Fitment Information:
| Vehicle | Position | Doors | Body | Drive Type |
|---|---|---|---|---|
| 1988 - Nissan Stanza | Rear | 4 | Wagon | 4WD |
- Camber Adjusting Kit
- From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 12 (mm) Bolts
- MOOG K90473 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13321A, 264-3641, 41212, 413541, 45K18031, 45K18035, 616-1035, 6161031, 770500, AA3641, K90473, MS90002, VV13321A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Nissan Sentra | Front |
- Camber Adjusting Kit
- From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 12 (mm) Bolts
- MOOG K90473 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Nissan Sentra | Rear |
Showing 1 - 10 of 58 products
Loading...