Image
Product
Price
- Ball Joint
- 4.150 (in) Length Cast Iron Arm without Aluminum Steering Knuckles
- MOOG K6541 Ball Joint
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.360
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Cadillac Escalade | Front Lower |
- Ball Joint
- 4.150 (in) Length Cast Iron Arm Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation without Aluminum Steering Knuckles
- MOOG K6541 Ball Joint
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.360
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104267, 104327, 12472819, 12475478, 15245582, 15922557, 19209396, 20869199, 20869200, 260-1528, 45D2272, 46D2272A, 505-1272, 505-1272B, 533-015, 610.66017, B6541, BJ91255...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Cadillac Escalade | Front Lower |
- Caster/Camber Adjusting Kit
- Camber / Caster Plus or Minus 1.5 Degrees Non-Greasable with Bolts & Cams
- MOOG K100026 Caster/Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13100026, 2643717, 4182512, 45K5012, 545510, 611-1211, AA3717, AE123451, AK90269, VV100026
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Cadillac Escalade | Front |
- Stabilizer Bar Link
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K6700 Stabilizer Bar Link
- Product Attributes:
- Bolt Length:
- 225.0
- 8.868
- Bushing Material: Rubber
- Greaseable: Yes
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10386415, 15039569, 15257472, 18391, 265-1634, 41038, 45G0425, 46G0425A, 5206 0011AB, 52060011AB, 535-834, 545-1425B, 5451425, 606.66021, 60766021, JTS738, K6700, MK6700...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Cadillac Escalade ESV | Rear |
- Stabilizer Bar Link
- MOOG K6700 Stabilizer Bar Link
- Product Attributes:
- Bolt Length:
- 225.0
- 8.868
- Bushing Material: Rubber
- Greaseable: Yes
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Cadillac Escalade ESV | Rear |
- Wheel Bearing and Hub Assembly
- MOOG 513288 Hub Assembly
- Product Attributes:
- Flange Bolt Hole Quantity: 3
- Anti Lock Brake Sensor Included: Yes
- Brake Pilot Diameter: 67.300
- Flange Offset: 42.000
- Bolt Circle Diameter: 120.000
- Hub Pilot Diameter: 91.200
- Wheel Pilot Diameter: 66.800
- Spline Quantity: 30
- Flange Diameter: 156.900
- Wheel Stud Quantity: 5
-
Features:
- RELIABLE PERFORMANCE -- Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
- EXTENDED SERVICE LIFE -- Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT -- Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL -- Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION -- Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
051-6402, 13502785, 13502886, 13504970, 13504972, 13507374, 13580135, 13580685, 13580687, 13589507, 13589509, 22859843, 23101982, 40162001, 40162001E, 513288, 516402, 7303080...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2016 - Cadillac CTS | Front | AWD |
- Camber Adjusting Kit
- without Performance Suspension From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 12 (mm) Bolts
- MOOG K90473 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13321A, 264-3641, 41212, 413541, 45K18031, 45K18035, 616-1035, 6161031, 770500, AA3641, K90473, MS90002, VV13321A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Cadillac XTS | Front |
- Stabilizer Bar Bushing Kit
- 36 (mm) Sway Bar Diameter Standard Design
- MOOG K200222 Stabilizer Bar Bushing Kit
- Product Attributes:
- Includes Dust Boots: No
- Quantity of Bushings: 2
- Bar Diameter (Inch): 1.420
- Includes Hardware: No
- Inner Diameter (Inch): 1.420
- Base to Centerline (Inch): 1.120
- Base to Centerline (mm): 43.8
- Length (Inch): 1.470
- Meets/Exceeds OE Manufacturer Specs: Exceeds
- Part Description: Sway Bar Bushing
- Outer Diameter (Inch): 1.760
-
Features:
- PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
15124516, 15135385, 2652748, 45G1673, 531-608, 550-1673, 602.66109, BSK90209, HB200222, JBU1285, MS508140, MS50868, MS50869
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Cadillac Escalade | Front To Frame |
- Stabilizer Bar Bushing Kit
- OE Type Standard Design
- MOOG K6408 Stabilizer Bar Bushing Kit
- Product Attributes:
- Includes Dust Boots: No
- Quantity of Bushings: 2
- Bar Diameter (Inch): 1.130
- Includes Hardware: No
- Inner Diameter (Inch): 1.130
- Length (Inch): 1.450
- Meets/Exceeds OE Manufacturer Specs: Exceeds
- Part Description: Sway Bar Bushing
- Outer Diameter (Inch): 1.750
-
Features:
- PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
04-86506, 14071381, 265-2153, 45G0631, 46G0631A, 486506, 539-044, 550-1131B, 550113-1, 602.66027, BB6408, E-6621-TU, E6621, FA7156, FB7156, HB1429, JBU1101, K6408...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Cadillac Escalade ESV | Rear To Frame |
- Camber Adjusting Kit
- Single Offset Adjuster with 16 (mm) Bolts From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Adapter Plate Not Included
- MOOG K90476 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13324A, 264-3644, 3544, 41216, 41216B, 45K18038, 616-1032, 616-1038, 616-1038B, AA3644, AK90409, VV13324A
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Cadillac CTS | Front | Vsport |
Showing 1 - 10 of 106 products
Loading...