Image
Product
Price
- For Dana 35; 3.55 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana 35
- Gear Ratio: 3.55
- Ring Gear Diameter: 7.5
- Ring & Pinion Gear Ratio: 3.55
- Pinion Shaft Diameter: 1.376
- Ring Gear Material: 8620 Steel
- Taxonomy C:
- Front
- Rear
- Ring Gear Outside Diameter: 7.5
- Taxonomy D: 3.55
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Ring Gear Bolt Quantity: 8
- Differential Carrier Break: 3.54 Ratio And Higher
- Pinion Spline Count: 26
- App/Model: Dana 35 Standard
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 39
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2000 - Mercury Mountaineer | Front | 4WD |
- For Dana 35; 3.55 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana 35
- Gear Ratio: 3.55
- Ring Gear Diameter: 7.5
- Ring & Pinion Gear Ratio: 3.55
- Pinion Shaft Diameter: 1.376
- Ring Gear Material: 8620 Steel
- Taxonomy C:
- Front
- Rear
- Ring Gear Outside Diameter: 7.5
- Taxonomy D: 3.55
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Ring Gear Bolt Quantity: 8
- Differential Carrier Break: 3.54 Ratio And Higher
- Pinion Spline Count: 26
- App/Model: Dana 35 Standard
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 39
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
035-355, 2020468, 24179, 697-363, 707244-3X, 713J730B, 73386-5X, D35355, DS2020468, M35-355-NG, SD3501, YG M35-355
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Jeep Wrangler | Rear |
- Differential Master Bearing Kit - Koyo
- For GM 9.5" (14 Bolt); Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
- Motive Gear - Differential Master Bearing Kit - Koyo
- Differential Bearing Kit
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.5
- Taxonomy C: Master Bearing Kits
- Taxonomy D: Rear
- Taxonomy A: Ld Differential
- Taxonomy B: Differential Rebuild Kits
- App/Model: Gm 9.5
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
83-1067-1, R9.5GRLMKT, XL-1067-1, ZK GM9.5-B
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - GMC Yukon XL 1500 | Rear |
- Differential Master Bearing Kit - Koyo
- For GM 9.25" (14 Bolt); Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
- Motive Gear - Differential Master Bearing Kit - Koyo
- Differential Bearing Kit
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.5
- Taxonomy C: Master Bearing Kits
- Taxonomy D: Rear
- Taxonomy A: Ld Differential
- Taxonomy B: Differential Rebuild Kits
- App/Model: Gm 9.5
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2000 - Chevrolet Suburban 2500 | Front | 4WD |
- Differential Master Bearing Kit - Koyo
- For Dana 70HD; Inner Bearing HM807040/010, Carrier Bearing 469/453X; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
- Motive Gear - Differential Master Bearing Kit - Koyo
- Differential Bearing Kit
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana 70 Hd
- Taxonomy C: Master Bearing Kits
- Taxonomy D: Rear
- Taxonomy A: Ld Differential
- Taxonomy B: Differential Rebuild Kits
- App/Model: Dana 70 Hd
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
331K, K35-2036, R70HRMKT, XL-1093-1, ZK D70-HD
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - GMC Savana 3500 | Rear |
- Differential Master Bearing Kit - Koyo
- For GM 10.5" (14 Bolt); 4.10 Ratio and Lower Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
- Motive Gear - Differential Master Bearing Kit - Koyo
- Differential Bearing Kit
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 10.5
- Taxonomy C: Master Bearing Kits
- Taxonomy D: Rear
- Taxonomy A: Ld Differential
- Taxonomy B: Differential Rebuild Kits
- App/Model: Gm 10.5
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
388K, 83-1065-1, K35-2023B, R14RLAMKHT, XL-1065-1, ZK GM14T-C
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Chevrolet K2500 | Rear |
- For Dana 70; 3.73 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.10 and Numerically Lower Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type:
- Dana 70
- Dana 70 Hd
- Dana 70 U
- Gear Ratio: 3.73
- Ring Gear Diameter: 10.5
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.75
- Ring Gear Material: 8620 Steel
- Taxonomy C: Rear
- Ring Gear Outside Diameter: 10.5
- Taxonomy D: 3.73
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Ring Gear Bolt Quantity: 12
- Differential Carrier Break: 4.10 Ratio And Lower
- Pinion Spline Count: 29
- App/Model:
- Dana 70
- Dana 70 Hd
- Dana 70 U
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
2-2035-373, 24073, 706999-3X, 717A730B, 72160-5X, D70-373-NG, D70373, YG D70-373
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Ford E-350 Super Duty | Rear |
- For Ford 9.75" (12 Bolt); 4.30 Ratio
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Ford 9.75
- Gear Ratio: 4.30
- Ring Gear Diameter: 9.75
- Ring & Pinion Gear Ratio: 4.30
- Pinion Shaft Diameter: 1.97
- Ring Gear Material: 8620 Steel
- Taxonomy C: Rear
- Ring Gear Outside Diameter: 9.75
- Taxonomy D: 4.30
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Ring Gear Bolt Quantity: 12
- Pinion Spline Count: 31
- App/Model: Ford 9.75
- Cover Bolt Quantity: 12
- Pinion Gear Tooth Quantity: 10
- Ring Gear Tooth Quantity: 43
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
F975430
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Lincoln Navigator | Rear |
- For GM 9.5" (14 Bolt); 3.42 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.5
- Gear Ratio: 3.42
- Ring Gear Diameter: 9.5
- Ring & Pinion Gear Ratio: 3.42
- Pinion Shaft Diameter: 1.876
- Ring Gear Material: 8620 Steel
- Taxonomy C: Rear
- Ring Gear Outside Diameter: 9.5
- Taxonomy D: 3.42
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Ring Gear Bolt Quantity: 12
- Differential Carrier Break: 3.42 Ratio And Higher
- Pinion Spline Count: 30
- App/Model: Gm 9.5
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 12
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
1-2010-342, 14038000, 20914868, 24502, 26015981, 26016526, 26058344, 26060559, 40051784, 40173817, 743B730, 84032508, G895342, GM9.5-342-NG, GM95342, SGM9501, YG GM9.5-342
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Chevrolet C2500 | Rear |
- For GM 9.5" (14 Bolt); 3.73 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.5
- Gear Ratio: 3.73
- Ring Gear Diameter: 9.5
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.876
- Ring Gear Material: 8620 Steel
- Taxonomy C: Rear
- Ring Gear Outside Diameter: 9.5
- Taxonomy D: 3.73
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Ring Gear Bolt Quantity: 12
- Differential Carrier Break: 3.42 Ratio And Higher
- Pinion Spline Count: 30
- App/Model: Gm 9.5
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
1-2010-373, 14037999, 2-2010-373, 24166, 26015719, 26016527, 26054981, 26060556, 26066802, 40033264, 697-322, 743B730A, 88965785, GM9.5-373-NG, GM95373, SGM9502, YG GM9.5-373
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Chevrolet Express 2500 | Rear |
Showing 1 - 10 of 18 products
Loading...