Image
Product
Price
- Differential Master Bearing Kit - Koyo
- For GM 10.5" (14 Bolt); 4.10 Ratio and Lower Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
- Motive Gear - Differential Master Bearing Kit - Koyo
- Differential Bearing Kit
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 10.5
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
388K, 83-1065-1, K35-2023B, R14RLAMKHT, XL-1065-1, ZK GM14T-C
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Chevrolet Express 3500 | Rear |
- Differential Bearing Kit - Koyo
- For GM 9.76"; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound
- Motive Gear - Differential Bearing Kit - Koyo
- Differential Bearing Kit
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.76
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2018 - GMC Yukon XL | V | 6162 | Rear | 8 Cyl 6.2L | 376 |
- For M275; 3.73 Ratio; With High Capacity Tow Package
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana Advantek M275
- Ring Gear Diameter: 275
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.97
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 14
- Pinion Spline Count: 32
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
2018521, LC3Z-4209-D, YG DM275-373
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Ford F-350 Super Duty | Rear |
- For Dana 44; For JK; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; 2007 Model Carriers Need To Be Drilled For 1/2" Ring Gear Bolts
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana 44 Jk
- Ring Gear Diameter: 8.89
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.626
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 10
- Differential Carrier Break: 3.73 Ratio And Lower
- Pinion Spline Count: 24
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
2008688-5
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Jeep Wrangler | Rear |
- For Dana 44; For JK; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana 44 Jk Reverse
- Ring Gear Diameter: 8.5
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.376
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Reverse
- Ring Gear Bolt Quantity: 10
- Differential Carrier Break: 3.73 Ratio And Lower
- Pinion Spline Count: 24
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
2013742-5, D44RS-373RUB, YG D44RS-RUB
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Jeep Wrangler | Front | Unlimited Rubicon |
- For Dana 44; For JK; 4.11 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana 44 Jk Reverse
- Ring Gear Diameter: 8.5
- Ring & Pinion Gear Ratio: 4.11
- Pinion Shaft Diameter: 1.376
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Reverse
- Ring Gear Bolt Quantity: 10
- Differential Carrier Break: 3.73 Ratio And Lower
- Pinion Spline Count: 24
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 10
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
2005024-5, D44RS-410RUB, D44RS-411-NG, YG D44RS-411RUB
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Jeep Wrangler | Front | Unlimited Rubicon |
- For GM 10.5" (14 Bolt); 3.75 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 10.5
- Ring Gear Diameter: 10.5
- Ring & Pinion Gear Ratio: 3.75
- Pinion Shaft Diameter: 1.75
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Differential Carrier Break: 4.10 Ratio And Lower
- Pinion Spline Count: 30
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 12
- Ring Gear Tooth Quantity: 45
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
1-2023-373, 12471291, 2-2023-373, 24134, 26014192, 26054996, 327721, 40010707, 40058731, 471871, 744A730A, GM105373, GM14T-373-NG, SGM10501, YG GM14T-373
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Chevrolet Suburban | Rear |
- For GM 10.5" (14 Bolt); 4.10 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 10.5
- Ring Gear Diameter: 10.5
- Ring & Pinion Gear Ratio: 4.10
- Pinion Shaft Diameter: 1.75
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Differential Carrier Break: 4.10 Ratio And Lower
- Pinion Spline Count: 30
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 45
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
1-2023-410, 2-2023-410, 20920669, 24135, 26014193, 26029468, 26029846, 26054993, 40010712, 40070463, 471872, 744A730B, GM105410, GM14T-410-NG, SGM10502, YG GM14T-411
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - GMC Savana 3500 | Rear |
- For Ford 10.5" (12 Bolt); 3.73 Ratio; 37 Spline
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Ford 10.5
- Ring Gear Diameter: 10.5
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.94
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Pinion Spline Count: 37
- Cover Bolt Quantity: 12
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
F10.5-373LPK, F105-373-37-NG, F105373C, YG F10.5-373-37
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Ford F-250 Super Duty | Rear |
- For Ford 10.5" (12 Bolt); 4.11 Ratio; 37 Spline
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Ford 10.5
- Ring Gear Diameter: 10.5
- Ring & Pinion Gear Ratio: 4.11
- Pinion Shaft Diameter: 1.94
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Pinion Spline Count: 37
- Cover Bolt Quantity: 12
- Pinion Gear Tooth Quantity: 9
- Ring Gear Tooth Quantity: 37
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
F105-410-37-NG, F105411C
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Ford F-250 Super Duty | Rear |
Showing 1 - 10 of 10 products
Loading...