1999 GMC Proform Parts
Choose a Model for your 1999 GMC
Image
Product
Price
- 1-Pair
- Emblem:Chevy Bowtie Emblem
- Sold As One Pair
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Wire Looms - Black
- Feature/Benefit: Using The Divisional Red Color, The Chevrolet Name And Bowtie Emblem Are Molded Onto The Black Nylon Head Of Each Wire Loom, Mounted On Chrome Stems.
- Using the divisional red color, the CHEVROLET name and Bowtie Emblem are molded onto the black nylon head of each wire loom, mounted on chrome stems. Fits Chevrolet small-block V8, 1959-86 and Chevrolet big-block V8 1965-91. 4-wire looms, 2 per package.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC K2500 Suburban | V | - | 8 Cyl 5.7L | 350 |
- SB Chevy
- SB Chevy; Mounting Bolt(s) Included:No; Emblem:Chevy Bowtie Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Stock; Finish:Chrome; Material:Stamped Steel
- Sold As One Pair
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Part Type: Valve Cover
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Center Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block Engines 1987 To Pre Ls
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers, Greatly Reducing The Likelihood Of Leakage Around The Valve Cover Flange Area Caused By Fasteners Being Over-torqued.
- Engine: Chevy Sb Gen 2 Vortec
- Breather Grommet Included: Yes
- Height:
- 2.25
- 57
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Technical Note: Chev Sm-blk Valve Covers & Valve Cover W/baffle Will Not Clear Most Stud Girdles
- Mounting Location: Center
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.125
- 54
- Sheen Level: High Gloss
- Valve Cover Type: Short
- These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. The chrome plating meets GM quality specifications. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. These stamped valve covers are offered in production height (short). Oil restricting baffles are offered in these valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy small-block valve covers and valve covers with baffles will not clear most stud girdle applications. Fits Chevy small-block engines 1987 to current.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC K1500 | V | - | 8 Cyl 5.7L | 350 |
- 16 Pcs
- SB Chevy;Std Length; 16 Pcs; Finish:Black Oxide; Material:4130 Chromoly Steel;Stud Diameter (in.):5/16 in.
- Sold As Set Of 16 Pieces
- Product Attributes:
- Category: 1-piece Pushrod Set
- Feature/Benefit: Heat-treated .065 Wall Thickness 4130 Chrome Moly, For Use With Guide Plates.
- Applications: Chevy Small Block Engines
- Exhaust Overall Length: 7.800 In.
- Make: Chevrolet
- Material: 4130 Chromoly Steel
- Pushrod Style: 1-piece
- Stud Diameter (in.): 5/16 In.
- Finish: Black Oxide
- Intake Overall Length: 7.800 In.
- Heat-treated .065 wall thickness 4130 chrome moly, for use with guide plates. 25% thicker walls than a major competitor's brand. Gloss black finish. Premium one-piece pushrods for the price of competitors 3-piece! Each end is precision formed with specified radius for optimum wear characteristics with minimal metal-to-metal friction. 16 pieces per package.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC Savana 1500 | V | - | 8 Cyl 5.7L | 350 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter Gear Reduction Type 2.2KW Compression Ratio :15:1 Finish: Natural Flywheel Tooth Number: 153 and 168-Tooth Gear Reduction Ratio: 3.75: 1 Material: Aluminum/Steel Mounting Plate: Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 15 : 1
- Part Type: Starter Motor
- Make: Chevrolet
- Finish: Natural
- Category: Starters
- Power Output: 2.2 Kilo Watts
- Mounting Plate: Straight Bolt Mounting Plate
- Applications: Chevy V6 Engines, Chevy Small Block Engines And Chevy Big Block Engines
- Flywheel Tooth Number: 153 & 168-tooth
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC P3500 | V | - | 6 Cyl 4.3L | 262 |
- SB Chevy
- Center Bolt Style Polish w/Bowtie Logo SB Chevy Mounting Bolt(s) Included: Yes Emblem Style: Recessed Red and Black Emblem Valve Cover Bolt Pattern: Center Bolt Valve Cover Height: Tall Material: Die Cast Aluminum
- Sold As One Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Part Type: Valve Cover
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Center Bolt
- Hold Down Tabs Included: No
- Finish: Polished
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block Engines 1987 To Pre Ls
- Material:
- Aluminum
- Die Cast Aluminum
- PCV Grommet Included: Yes
- Feature/Benefit: New Larger Emblem.
- Engine: Chevy Sb Gen 2 Vortec
- Breather Grommet Included: Yes
- Height:
- 102
- 4
- Valve Cover Gasket Included: No
- Valve Cover Height: Tall
- Mounting Location: Center
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: Yes
- Inside Clearance Height:
- 3.875
- 99
- Sheen Level: Semi-gloss
- Valve Cover Type: Tall
- New Larger Emblem. Late-Model Die-Cast Aluminum Valve Covers, 1987-current. Center hold-down, tall. Supplied with mounting bolts, steel and rubber washers (also available separately as 141-133). All valve covers sold in pairs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC K2500 Suburban | V | - | 8 Cyl 5.7L | 350 |
- 1-Pair
- Emblem: Chevy Bowtie Emblem
- Sold As One Pair
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Wire Looms - Black
- Feature/Benefit: Using The Divisional Red Color, The Chevrolet Name And Bowtie Emblem Are Molded Onto The Black Nylon Head Of Each Wire Loom, Mounted On Chrome Stems.
- Using the divisional red color, the CHEVROLET name and Bowtie Emblem are molded onto the black nylon head of each wire loom, mounted on chrome stems. Fits Chevrolet small-block V8, 1959-86 and Chevrolet big-block V8 1965-91. 4-wire looms, 2 per package.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC Savana 1500 | V | - | 8 Cyl 5.7L | 350 |
- Fits BB Chevy Engines
- Electric Engine Water Pump; Aluminum;Fits BB Chevy Engines; Finish:Black
- Sold Individually
- Product Attributes:
- Rotation: Standard
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Length: 7 Inch
- Impeller Vane Quantity: 1
- Part Type: Water Pump
- Make: Chevrolet
- Finish: Black
- Outlet Quantity: 1
- Hub Height: 7
- Category: Water Pumps
- Installation Warnings: No
- Applications: Chevy Big Block Engines
- Hub Hole Quantity: 1
- Impeller Rotation: Standard
- Pulley Included: No
- Hub Hole Thread Size: 1 Ntp
- Feature/Benefit: The New Chevy Big-block Electric Water Pump Features A Durable 12-volt Motor Pumping Up To 35+ Gallons Of Water Per Minute.
- Engine: Chevy Big Block
- Flow Rate: 35 Gpm
- Pump Flow: 35 Gpm
- Hub Hole Thread Diameter: 1
- Includes Back Housing: Yes
- Mounting Hole Quantity: 4
- Water Pump Drive Type: Electric
- Thermostat And Housing Included: No
- Condition: New
- Impeller Material: Aluminum
- The new Chevy big-block electric water pump features a durable 12-volt motor pumping up to 35+ gallons of water per minute. Each pump is made from durable but light-weight die-cast aluminum with epoxy powder coating for corrosion resistance. Comes with FREE billet aluminum inlet fitting, and mating weather-tight connector. Draws 6 amps.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC Savana 3500 | V | - | 8 Cyl 7.4L | 454 |
- SB Chevy
- SB Chevy Mounting Bolt(s) Included: No Emblem: Chevy Bowtie Emblem Valve Cover Bolt Pattern: Center Bolt Valve Cover Height: Stock Finish: Chrome Material: Stamped Steel
- Sold As One Pair
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Part Type: Valve Cover
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Center Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block Engines 1987 To Pre Ls
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers, Greatly Reducing The Likelihood Of Leakage Around The Valve Cover Flange Area Caused By Fasteners Being Over-torqued.
- Engine: Chevy Sb Gen 2 Vortec
- Breather Grommet Included: Yes
- Height:
- 2.25
- 57
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Technical Note: Chev Sm-blk Valve Covers & Valve Cover W/baffle Will Not Clear Most Stud Girdles
- Mounting Location: Center
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.125
- 54
- Sheen Level: High Gloss
- Valve Cover Type: Short
- These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. The chrome plating meets GM quality specifications. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. These stamped valve covers are offered in production height (short). Oil restricting baffles are offered in these valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy small-block valve covers and valve covers with baffles will not clear most stud girdle applications. Fits Chevy small-block engines 1987 to current.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC Savana 1500 | V | - | 8 Cyl 5.0L | 305 |
- Fits Small Block Chevy using 6-3/4 or 7 Inch Balancer
- Fits Small Block Chevy using 6-3/4 or 7 Inch Balancer Emblem: No Emblems or Logos Finish: Chrome Material: Steel
- Sold Each
- Product Attributes:
- Emblem: No Emblems Or Logos
- Diameter: 6-3/4-in. Balancer
- Category: Timing Tab
- Feature/Benefit: Premium Chrome Timing Chain Pointer
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Part Type: Engine Timing Tab
- Make: Chevrolet
- Material: Steel
- Finish: Chrome
- Premium Chrome Timing Chain Pointer
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC Yukon | V | - | 8 Cyl 5.7L | 350 |
- SB Chevy
- Center Bolt Style;SB Chevy; Mounting Bolt(s) Included:No; Emblem:CHEVROLET and Bowtie Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Stock; Finish:Black Crinkle; Material:Stamped Steel
- Sold As One Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Center Bolt
- Hold Down Tabs Included: No
- Finish:
- Black Crinkle
- Powder Coated
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block Engines 1987 To Pre Ls
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers.
- Engine: Chevy Sb Gen 2 Vortec
- Breather Grommet Included: Yes
- Height:
- 2.25
- 57
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Technical Note: Stock Height Chevy Small Block Valve Covers Will Not Clear Valve Trains Using Stud Girdles
- Mounting Location: Center
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.125
- 54
- Sheen Level: Matte
- Valve Cover Type: Short
- These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. These valve covers bear the powerful Bowtie Emblem. These stamped valve covers are offered in production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy small-block valve covers and valve covers with baffles will not clear most stud girdle applications. Fits Chevy small-block engines 1987 to current.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC C2500 Suburban | V | - | 8 Cyl 5.7L | 350 |
Showing 1 - 10 of 29 products
Loading...