1967 Ram Parts

Choose a Make for your 1967 vehicle


Showing 1 - 10 of 22 products
Image
SKU
Product
Rating
Price

Ram
  • HDX clutch set
  • 10.5 x 1 1/8-10 Spline
  • HDX clutch set 1955-85 GM Diaphragm 10.5 x 1 1/8-10
  • HDX Clutch Set
  • Features:
    • Built With 30 Percent More Clamp Pressure Than Stock
    • Smooth
    • Chatter Free Operation
    • Premium Organic Composite Disc Friction Material
    • Exclusive 8-Spring Hub Assembly Where Applicable
    • Great Drivability
    • Use For Power Levels To 450 HP
    • Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
  • The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:
Vehicle Block CC Engine CID
1967 - Pontiac Grand Prix V 7014 8 Cyl 7.0L 428

Ram
  • Lever Style; 10.5 x 1 1/16-10 Spline
  • Replacement clutch set Ford lever style1965-70/289/302/10.5 x 1 1/16-10
  • Replacement Clutch Set
  • Features:
    • Replacement Clutch Set
    • OEM Quality Replacement Components
    • Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
  • RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1967 - Ford Mustang V 4727 8 Cyl 4.7L Base 289

Ram
  • HDX clutch set
  • 11 x 1 1/8-10 Spline
  • HDX clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
  • HDX Clutch Set
  • Features:
    • Built With 30 Percent More Clamp Pressure Than Stock
    • Smooth
    • Chatter Free Operation
    • Premium Organic Composite Disc Friction Material
    • Exclusive 8-Spring Hub Assembly Where Applicable
    • Great Drivability
    • Use For Power Levels To 450 HP
    • Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
  • The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:
Vehicle Block CC Engine CID
1967 - Chevrolet Corvette V 6998 8 Cyl 7.0L 427

Ram
  • 10.5 x 1 1/8-10 Spline 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
  • Replacement clutch set 1955-85 GM Diaphragm 10.5 x 1 1/8-10
  • Replacement Clutch Set
  • Features:
    • Replacement Clutch Set
    • OEM Quality Replacement Components
    • Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
  • RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:
Vehicle Block CC Engine CID
1967 - Pontiac Grand Prix V 7014 8 Cyl 7.0L 428

Ram
  • 11 x 1 1/8-10 Spline 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
  • Replacement clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
  • Replacement Clutch Set
  • Features:
    • Replacement Clutch Set
    • OEM Quality Replacement Components
    • Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
  • RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:
Vehicle Block CC Engine CID
1967 - Pontiac Bonneville V 6555 8 Cyl 6.6L 400

Ram
  • steel flywheel
  • 2.75 Register; 166 Teeth; 0 Balance
  • Steel flywheel Pontiac 1964-72/2.75 register/166T/0 bal.
  • Steel Flywheel
  • Features:
    • Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
    • Surface Ground For Optimum Disc Mating Surface
    • Strictly Factory Warranty Only
  • The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1967 - Pontiac Firebird V - 8 Cyl 6.6L HO 400

Ram
  • pilot bushing/bearing
  • 0.591 in. ID; 1.383 in. OD; 0.357 in. Length
  • Pilot bushing/bearing Pontiac/Oldsmobile
  • Product Attributes:
    • Inside Diameter: 0.591 In.
    • Outside Diameter: 1.383 In.
    • Overall Length: 0.357 In.
  • Features:
    • Pilot Bushing/Bearing
    • Strictly Factory Warranty Only
  • Premium replacement pilot bearings and bushings complete your clutch install for a long, trouble free life of operation.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1967 - Pontiac Firebird V - 8 Cyl 6.6L 400 400

Ram
  • steel flywheel
  • 168 Teeth; Zero Balance
  • Steel flywheel Chevy 1955-85/262-427/0 bal./168T
  • Steel Flywheel
  • Features:
    • Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
    • Surface Ground For Optimum Disc Mating Surface
    • Strictly Factory Warranty Only
  • The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:
Vehicle
1967 - Chevrolet Corvette

Ram
  • steel flywheel
  • 153 Teeth; 10.5 B/B And Diaphragm
  • Lightweight Steel flywheel Chevy 305-350/63-85/0 balance/153T/10.5 B/B/Diaphragm
  • Steel Flywheel
  • Features:
    • Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
    • Surface Ground For Optimum Disc Mating Surface
    • Strictly Factory Warranty Only
  • The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:
Vehicle Block CC Engine CID
1967 - Chevrolet Biscayne V 6998 8 Cyl 7.0L 427

Ram
  • 12 in. Lever Style; Replaces 11.5 Lever 1 3/8-10 Spline
  • Replacement clutch set 1965-72 Ford BB engines 12 inch lever style that replaces 11.5 lever 1 3/8-10
  • Replacement Clutch Set
  • Features:
    • Replacement Clutch Set
    • OEM Quality Replacement Components
    • Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
  • RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1967 - Ford Mustang V 6391 8 Cyl 6.4L Base 390
Showing 1 - 10 of 22 products

Loading...