Image
Product
Price
- steel flywheel
- 6 Bolt ; 130 Teeth; 10.5 in. Borg/Beck And Diaphragm; Zero Balance
- Steel flywheel Chrysler 318-440/64-99/0 bal./except 360/6 bolt/130T/10.5 Borg/Beck/Diaphragm
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1972 - Plymouth Fury II | V | 5211 | 8 Cyl 5.2L | Base | 318 |
- steel flywheel
- 153 Teeth; 10.5 B/B And Diaphragm
- Lightweight Steel flywheel Chevy 305-350/63-85/0 balance/153T/10.5 B/B/Diaphragm
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet C10 Pickup | V | - | 8 Cyl 5.0L | 307 |
- steel flywheel
- 454 Balance; 168 Teeth; 10.5 And 11 B&B And Diaphragm; 11 in. Long
- Steel flywheel Chevy 454/70-90/ext. bal./168T/10.5/11 B/B/Diaphragm; 11 long
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet Impala | V | - | 8 Cyl 7.4L | 454 |
- steel flywheel
- 2.75 Register; 166 Teeth; 0 Balance
- Steel flywheel Pontiac 1964-72/2.75 register/166T/0 bal.
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Pontiac Ventura | V | 5733 | 8 Cyl 5.7L | 350 |
- alignment tool/Steel
- alignment tool/Steel 1 1/8-26 GM (.590 pilot)
-
Features:
- Precision Machined Steel Tool Provides Better Alignment
- Open Ended Design Allows Progressive Loading Of The Clutch Pack
- Step up to a RAM steel alignment tool for your clutch installation. Plastic tools are inaccurate and can cause difficulty upon reinstallation of the transmission. RAM steel alignment tools are precision machined for an exact fit and ease of installation. The open ended design makes it possible to progressively load the clutch pack without having to juggle the parts in your hand while assembling to the flywheel. These are especially helpful when installing multiple disc clutches.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1972 - Chevrolet Chevelle | V | 7441 | 8 Cyl 7.4L | Malibu | 454 |
- alignment tool/Steel
- w/11 in. Clutch; 26 Spline
- alignment tool/Steel 1 1/8-26 GM (.590 pilot)
-
Features:
- Precision Machined Steel Tool Provides Better Alignment
- Open Ended Design Allows Progressive Loading Of The Clutch Pack
- Step up to a RAM steel alignment tool for your clutch installation. Plastic tools are inaccurate and can cause difficulty upon reinstallation of the transmission. RAM steel alignment tools are precision machined for an exact fit and ease of installation. The open ended design makes it possible to progressively load the clutch pack without having to juggle the parts in your hand while assembling to the flywheel. These are especially helpful when installing multiple disc clutches.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1972 - Chevrolet Chevelle | V | - | 8 Cyl 5.7L | Concours Estate | 350 |
- alignment tool/Steel
- Ford Vehicles w/11 in. Lever Clutch
- alignment tool/Steel 1 1/8-26 Ford (.670 pilot)
-
Features:
- Precision Machined Steel Tool Provides Better Alignment
- Open Ended Design Allows Progressive Loading Of The Clutch Pack
- Step up to a RAM steel alignment tool for your clutch installation. Plastic tools are inaccurate and can cause difficulty upon reinstallation of the transmission. RAM steel alignment tools are precision machined for an exact fit and ease of installation. The open ended design makes it possible to progressively load the clutch pack without having to juggle the parts in your hand while assembling to the flywheel. These are especially helpful when installing multiple disc clutches.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine Version | CID |
|---|---|---|---|---|---|
| 1972 - Ford Torino | V | 5753 | 8 Cyl 5.8L | Cleveland | 351 |
- steel flywheel
- 168 Teeth; Zero Balance
- Steel flywheel Chevy 1955-85/262-427/0 bal./168T
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Chevrolet C10 Pickup | V | - | 8 Cyl 5.7L | 350 |
- alignment tool/Steel
- w/26 Spline Input; 2.750 in.
- alignment tool/Steel 1 1/8-26 GM (.590 pilot)
-
Features:
- Precision Machined Steel Tool Provides Better Alignment
- Open Ended Design Allows Progressive Loading Of The Clutch Pack
- Step up to a RAM steel alignment tool for your clutch installation. Plastic tools are inaccurate and can cause difficulty upon reinstallation of the transmission. RAM steel alignment tools are precision machined for an exact fit and ease of installation. The open ended design makes it possible to progressively load the clutch pack without having to juggle the parts in your hand while assembling to the flywheel. These are especially helpful when installing multiple disc clutches.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Pontiac GTO | V | 6555 | 8 Cyl 6.6L | 400 |
- alignment tool/Steel
- w/11 in. Clutch
- alignment tool/Steel 1 1/8-26 GM (.590 pilot)
-
Features:
- Precision Machined Steel Tool Provides Better Alignment
- Open Ended Design Allows Progressive Loading Of The Clutch Pack
- Step up to a RAM steel alignment tool for your clutch installation. Plastic tools are inaccurate and can cause difficulty upon reinstallation of the transmission. RAM steel alignment tools are precision machined for an exact fit and ease of installation. The open ended design makes it possible to progressively load the clutch pack without having to juggle the parts in your hand while assembling to the flywheel. These are especially helpful when installing multiple disc clutches.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1972 - Chevrolet Camaro | V | - | 8 Cyl 5.7L | L | 350 |
Showing 1 - 10 of 34 products
Loading...