Image
Product
Price
- steel flywheel
- 6 Bolt ; 130 Teeth; 10.5 in. Borg/Beck And Diaphragm; Zero Balance
- Steel flywheel Chrysler 318-440/64-99/0 bal./except 360/6 bolt/130T/10.5 Borg/Beck/Diaphragm
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1974 - Plymouth Fury II | V | - | 8 Cyl 6.6L | Base | 400 |
- steel flywheel
- 153 Teeth; 10.5 B/B And Diaphragm
- Lightweight Steel flywheel Chevy 305-350/63-85/0 balance/153T/10.5 B/B/Diaphragm
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Chevrolet Impala | V | - | 8 Cyl 5.7L | 350 |
- steel flywheel
- 454 Balance; 168 Teeth; 10.5 And 11 B&B And Diaphragm; 11 in. Long
- Steel flywheel Chevy 454/70-90/ext. bal./168T/10.5/11 B/B/Diaphragm; 11 long
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Chevrolet G20 Van | V | 7439 | 8 Cyl 7.4L | 454 |
- steel flywheel
- 2.75 Register; 166 Teeth; 0 Balance
- Steel flywheel Pontiac 1964-72/2.75 register/166T/0 bal.
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Pontiac Firebird | V | - | 8 Cyl 7.5L | 455 |
- steel flywheel
- 168 Teeth; Zero Balance
- Steel flywheel Chevy 1955-85/262-427/0 bal./168T
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Chevrolet C30 Pickup | V | 7439 | 8 Cyl 7.4L | 454 |
- alignment tool/Steel
- alignment tool/Steel 1 1/8-26 GM (.590 pilot)
-
Features:
- Precision Machined Steel Tool Provides Better Alignment
- Open Ended Design Allows Progressive Loading Of The Clutch Pack
- Step up to a RAM steel alignment tool for your clutch installation. Plastic tools are inaccurate and can cause difficulty upon reinstallation of the transmission. RAM steel alignment tools are precision machined for an exact fit and ease of installation. The open ended design makes it possible to progressively load the clutch pack without having to juggle the parts in your hand while assembling to the flywheel. These are especially helpful when installing multiple disc clutches.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Chevrolet Malibu | V | - | 8 Cyl 7.4L | 454 |
- Size: 11 in.; 26 Spline By 1-1/8 in.; 168 Teeth Count
- Concept 10.5 dual disc 1 1/8-26; Chevy 168T
- Concept 10.5 Organic Dual Disc Clutch Assembly
-
Features:
- Clampload Of 2400 lbs
- 800-1200HP
- Smooth Engagement
- RAM Concept 10.5 dual disc clutches offer upgrades from existing designs while keeping your budget in mind. A 10.5 inch cover with 2400 pounds of clampload offers more holding power and a larger surface area to dissipate heat, while maintaining an easy pedal effort. The stronger, billet modular mounting ring is machined with multiple bolt patterns to adapt to most any flat flywheel. Larger, 10.5 inch discs are available in either organic or metallic friction material, and the top disc is spring dampened to soften engagement. RAM Concept 10.5 dual disc units ship with all high grade fasteners included to complete your install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1974 - Chevrolet Camaro | V | - | 8 Cyl 5.7L | Z28 | T | 350 |
- Size: 11 in.; 26 Spline By 1-1/8 in.; 168 Teeth Count 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
- Concept 10.5 dual disc 1 1/8-26; Chevy 168T
- Concept 10.5 Organic Dual Disc Clutch Assembly
-
Features:
- Clampload Of 2400 lbs
- 800-1200HP
- Smooth Engagement
- RAM Concept 10.5 dual disc clutches offer upgrades from existing designs while keeping your budget in mind. A 10.5 inch cover with 2400 pounds of clampload offers more holding power and a larger surface area to dissipate heat, while maintaining an easy pedal effort. The stronger, billet modular mounting ring is machined with multiple bolt patterns to adapt to most any flat flywheel. Larger, 10.5 inch discs are available in either organic or metallic friction material, and the top disc is spring dampened to soften engagement. RAM Concept 10.5 dual disc units ship with all high grade fasteners included to complete your install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1974 - Pontiac Firebird | V | 7456 | 8 Cyl 7.5L | Trans Am | 455 |
- alignment tool/Steel
- w/11 in. Clutch
- alignment tool/Steel 1 1/8-26 GM (.590 pilot)
-
Features:
- Precision Machined Steel Tool Provides Better Alignment
- Open Ended Design Allows Progressive Loading Of The Clutch Pack
- Step up to a RAM steel alignment tool for your clutch installation. Plastic tools are inaccurate and can cause difficulty upon reinstallation of the transmission. RAM steel alignment tools are precision machined for an exact fit and ease of installation. The open ended design makes it possible to progressively load the clutch pack without having to juggle the parts in your hand while assembling to the flywheel. These are especially helpful when installing multiple disc clutches.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1974 - Chevrolet Camaro | V | - | 8 Cyl 5.7L | Z28 | T | 350 |
- Lever Style; 10.5 x 1 1/16-10 Spline
- Replacement clutch set Ford lever style1965-70/289/302/10.5 x 1 1/16-10
- Replacement Clutch Set
-
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Ford Torino | V | - | 8 Cyl 5.0L | 302 |
Showing 1 - 10 of 30 products
Loading...