Image
Product
Price
- HDX clutch set
- 10.5 x 1 1/8-10 Spline
- HDX clutch set 1955-85 GM Diaphragm 10.5 x 1 1/8-10
- HDX Clutch Set
-
Features:
- Built With 30 Percent More Clamp Pressure Than Stock
- Smooth
- Chatter Free Operation
- Premium Organic Composite Disc Friction Material
- Exclusive 8-Spring Hub Assembly Where Applicable
- Great Drivability
- Use For Power Levels To 450 HP
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Pontiac Catalina | V | - | 8 Cyl 5.7L | 350 |
- aluminum flywheel
- 0 Balance; 168 Teeth
- Aluminum flywheel Chevy 1955-85/262-427/0 bal./168T
- Aluminum Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- .250 in. Thick Steel Friction Insert
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Chevrolet C10 | V | - | 8 Cyl 5.0L | 305 |
- HDX clutch set
- 11 x 1 1/8-10 Spline
- HDX clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
- HDX Clutch Set
-
Features:
- Built With 30 Percent More Clamp Pressure Than Stock
- Smooth
- Chatter Free Operation
- Premium Organic Composite Disc Friction Material
- Exclusive 8-Spring Hub Assembly Where Applicable
- Great Drivability
- Use For Power Levels To 450 HP
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1979 - Chevrolet C10 | V | - | 8 Cyl 6.6L | Silverado | 400 |
- HDX clutch set
- 11 x 1 1/8-26 Spline
- HDX clutch set 1955-85 GM 11 Diaphragm 1 1/8-26
- HDX Clutch Set
-
Features:
- Built With 30 Percent More Clamp Pressure Than Stock
- Smooth
- Chatter Free Operation
- Premium Organic Composite Disc Friction Material
- Exclusive 8-Spring Hub Assembly Where Applicable
- Great Drivability
- Use For Power Levels To 450 HP
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1979 - Pontiac Firebird | V | - | 8 Cyl 6.6L | Formula | 400 |
- 10.5 x 1 1/8-10 Spline 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
- Replacement clutch set 1955-85 GM Diaphragm 10.5 x 1 1/8-10
- Replacement Clutch Set
-
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Pontiac Catalina | V | - | 8 Cyl 4.9L | 301 |
- 11 x 1 1/8-10 Spline 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
- Replacement clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
- Replacement Clutch Set
-
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Pontiac Bonneville | V | - | 8 Cyl 5.7L | 350 |
- steel flywheel
- 2.75 Register; 166 Teeth; 0 Balance
- Steel flywheel Pontiac 1964-72/2.75 register/166T/0 bal.
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Pontiac Catalina | V | - | 8 Cyl 4.9L | 301 |
- 11 x 1 1/8-26 Spline
- Replacement clutch set 1955-85 GM 11 Diaphragm 1 1/8-26
- Replacement Clutch Set
-
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1979 - Pontiac Firebird | V | - | 8 Cyl 6.6L | Trans Am | 400 |
- Powergrip HD Clutch set
- 11 x 1 1/8-26 Spline
- Powergrip HD clutch set 1955-85 GM 11 Diaphragm 1 1/8-26
- Powergrip HD Clutch Set
-
Features:
- True Strip/Street Competition Clutch System To The 650 HP Level
- 8 Spring Hum Is Equipped w/Ram Polycoil Damper Springs
- Sintered metallic Friction Material
- For Vehicles That See Frequent Track Duty
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- POWERGRIP HD is a true "strip/street" competition clutch system that can handle the rigors of weekend racing and spirited street driving. This system has the same components as standard POWERGRIP above with the exception that the disc friction surfaces are both sintered iron. Sintered iron provides a degree of slippage on vehicle launch to prevent the violent and uncontrollable engagement characteristics of paddle type metallic discs. This firm consistent engagement is easy to control. Some chatter is likely on engagement with rear gearing less than 3.73 in street applications. Each set includes the pressure plate, clutch disc, release bearing, and alignment tool unless otherwise noted. Use Powergrip HD for power levels to 650 horsepower, or lower powered vehicles that see frequent track duty.
Additional Fitment Information:
| Vehicle |
|---|
| 1979 - Chevrolet Corvette |
- pilot bushing/bearing
- 0.672 in. ID; 1.379 in. OD; 0.725 in. Length
- Pilot bushing/bearing Ford
- Product Attributes:
- Inside Diameter: 0.672 In.
- Outside Diameter: 1.379 In.
- Overall Length: 0.725 In.
-
Features:
- Pilot Bushing/Bearing
- Strictly Factory Warranty Only
- Premium replacement pilot bearings and bushings complete your clutch install for a long, trouble free life of operation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford F-150 | V | - | 8 Cyl 5.0L | 302 |
Showing 1 - 10 of 25 products
Loading...