Image
Product
Price
- Big Bore; Includes Mounting Brackets and Hardware
- N3 Dual Steering Stabilizer; Big Bore; Includes Mounting Brackets and Hardware;
- N3 Dual Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-on Installation.
- Improves Control And Handling.
- Reduces Bump Steer.
- Reduces Tie Rod And Ball Joint Wear And Tear.
- Chrome Hardened 9/16 in. Piston Rod
- Steering stabilizers are designed to restrain in.bump steer in. and front end vibration, giving added life to tires, ball joints, and other steering components.
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 1989 - Ford F-350 | XLT Lariat | RWD |
- For 0-4 in. Lift
- Stainless Steel Brake Lines; Rear; For 0-4 in. Lift;
- Stainless Steel Brake Lines
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- DOT Approved
- Braided Stainless Steel Exterior
- Offers Superior Protection From Off-Road Debris
- Pressure Tested To 4000-psi
- Upgrade your worn out rubber brake lines with Rough Countrys Stainless Extended Steel Brake Line Kit. Our DOT approved brake line kits offer the necessary extra length to install your application, perfect for anyone who wants to swap out poor performing or decaying factory brake lines.Rough Countrys Stainless Steel replacements offer superior protection and a seriously long lifespan. A braided stainless steel exterior keeps your lines free from off-road debris, rocks, and mud that can penetrate factory rubber lines. This durable outer layer also prevents expansion of the internal Teflon layer - even under 4,000PSI - keeping fluid moving to the brake line for a noticeably firmer brake pedal feel. High-quality hollow fasteners at both ends of each brake line provide a leak-free flow path. s at both ends of each brake line provide a leak-free flow path.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1989 - Ford F-150 | Rear | XL | 4WD |
- 1.5 in. Lift Install Time 1-2 Hours~Includes The Following Parts~Coil Springs
- Front Leveling Kit; 1.5 in. Lift;
- Front Leveling Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- Increased Ground Clearance
- Levels Front Of Vehicle w/The Rear
- Give your Ford a level look from front to rear with Rough Countrys 1.5in coil spring leveling kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance, and is considered one of the best ways to lift a Ford truck! Once installed, this kit can run up to a 32x11.50 tire with factory wheel backspacing. Includes Rough Countrys 5-year Coil Spring Warranty!
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Ford F-150 | V | 5753 | Front | 8 Cyl 5.8L | 351 |
- Maintains Draglink Alignment; Maintains Turning Radius; Fits 4-6 in. Lift
- Pitman Arm; Maintains Draglink Alignment; Maintains Turning Radius; Fits 4-6 in. Lift;
- Pitman Arm
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Maintains Proper Draglink Alignment
- Maintains Optimum Turning Radius
- Helps Reduce Steering Vibrations
- After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1989 - Ford F-150 | Front | XL |
- Includes Mounting Brackets and Hardware Superseded From PN[87331.20]
- N3 Steering Stabilizer; Includes Mounting Brackets and Hardware;
- N3 Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-on Installation.
- Improves Control And Handling.
- Reduces Bump Steer.
- Reduces Tie Rod And Ball Joint Wear And Tear.
- Chrome Hardened 9/16 in. Piston Rod
- Steering stabilizers are designed to restrain in.bump steering in. and front end vibration, giving added life to tires, ball joints, and other steering components and are highly recommended for vehicles running aftermarket tires. The durable 18mm chrome hardened piston rod and large-bodied cylinder dwarfs factory equipment, ensuring a more effective vibration damping each and every time you take to the trails. Rough Countrys N3 Steering Stabilizer kit is easy to install, with a 100% bolt-on installation process that can be installed in a home garage with common tools.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Ford Bronco II | Front |
- 4 in.; 52.688 in. Length; 8.75 in. Uncompressed Arch; 30.122 in. Uncompressed Half Length
- Leaf Spring; Rear; 4 in.; 52.688 in. Length; 8.75 in. Uncompressed Arch; 30.122 in. Uncompressed Half Length;
- Leaf Spring
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Bushings Included
- Sold As A Pair
- Added Lift Height and Ride Comfort. Take your suspension kit to the next level with Rough Country's Replacement Leaf Springs. Constructed from high-quality materials and designed specifically for the weight of your vehicle. This enhanced replacement spring will provide a factory-like feel while retaining your suspension lift height. Durable and Off-Road Ready. Rough Country's Replacement Leaf Springs are designed to tackle any terrain that they are faced with. Featuring a multi-leaf design and spring pads this reduces the friction and maximizes comfort. Each leaf pack utilizes tapered leaves for improved flexibility at their ends. Installation. Rough Country's Replacement Leaf Springs offer a 100% bolt-on installation estimated to take approximately 1-2 hours depending on vehicle condition. Simply remove the pre-existing leaf spring and use the stock hardware to equip your vehicle with this high-quality replacement. Lifetime Replacement Warranty. Rough Country's Replacement Leaf is backed with a 5-year replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1989 - Ford F-150 | Rear | 4WD |
- Includes [1] V2 Hardware
- Steering Stabilizer; Includes [1] V2 Steering Stabilizer; Hardware;
- Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Improves Control And Handling
- Reduces Bump Steer
- Reduces Tie Rod And Ball Joint Wear And Tear
- Superior Design and Comfort. Give yourself peace of mind when upgrading to a larger wheel and tire set up with Rough Country's V2 stabilizers! Steering stabilizers are designed to restrain 'bump steer' and front-end vibration, giving added life to tires, ball joints, and other steering components. Rough Country's V2 stabilizers improve the overall driving experience by providing precise dampening raising the vehicle's overall comfort and functionality. Durable Construction. Rough Country's V2 stabilizers boast a T6061 brushed aluminum body with black anodized accents giving it a striking visual appearance that also dissipates heat faster than other materials. The internal 46mm high-flow piston offers countless years of durability. Rough Country's V2 stabilizers are the pinnacle of a true performance upgrade. Installation. Rough Country's V2 stabilizers can be installed in no time! This full kit can be installed at home using standard tools and can be completed efficiently and quickly! 3-Year Warranty. Rough Country's V2 stabilizers are backed with Rough Country's 3-year replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Ford F-250 | Front |
- Includes [2] V2 Steering Stabilizers; Brackets; Hardware
- V2 Dual Steering Stabilizer; Includes [2] V2 Steering Stabilizers; Brackets; Hardware;
- V2 Dual Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Improves Control And Handling
- Reduces Bump Steer
- Reduces Tie Rod And Ball Joint Wear And Tear
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 1989 - Ford F-350 | Custom | 4WD |
- Includes Mounting Brackets and Hardware Superseded From PN[87342.20]
- N3 Steering Stabilizer; Includes Mounting Brackets and Hardware;
- N3 Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-on Installation.
- Improves Control And Handling.
- Reduces Bump Steer.
- Reduces Tie Rod And Ball Joint Wear And Tear.
- Chrome Hardened 9/16 in. Piston Rod
- Steering stabilizers are designed to restrain in.bump steering in. and front end vibration, giving added life to tires, ball joints, and other steering components and are highly recommended for vehicles running aftermarket tires. The durable 18mm chrome hardened piston rod and large-bodied cylinder dwarfs factory equipment, ensuring a more effective vibration damping each and every time you take to the trails. Rough Countrys N3 Steering Stabilizer kit is easy to install, with a 100% bolt-on installation process that can be installed in a home garage with common tools.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1989 - Ford F-350 | Front | XLT Lariat | RWD |
- Rear; 2-3.5 in. Lift; 23.83 in.Extended Length; 14.65 in. Collapsed Length; w/2 - 3.5 in. Lift
- M1 Shock Absorber; Rear; 2-3.5 in. Lift; 23.83 in.Extended Length; 14.65 in. Collapsed Length;
- M1 Shock Absorber
- Product Attributes:
- Collapsed Length: 14.650 In.
- Shock Stroke: 9.180 In.
- WARNING CA Proposition 65: No
- Extended Length: 23.830 In.
-
Features:
- 2 in. Seamless Extruded Tube
- 46mm Digressive Piston
- Self-Adjusting Deflective-Disc Independent Rebound And Compression
- 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
- 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
- Digressive Valving Instantly Reacts To Changing Surface Conditions
- Zinc Plated For Resistance Against Harsh Elements
- Available In Various Lift Heights For Multiple Applications
- Durable Vulcanized Natural Rubber Bushings
- Free Shipping
- 3 Year Manufacturer Warranty
- Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and glavanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Ford Bronco | Rear |
Showing 1 - 10 of 508 products
Loading...